Trains.com

Mixing of scales?

1256 views
8 replies
1 rating 2 rating 3 rating 4 rating 5 rating
  • Member since
    October 2004
  • From: Northwest Montana
  • 409 posts
Mixing of scales?
Posted by Rastun on Sunday, November 28, 2004 1:15 PM
Hello everyone,

I've just embarked on my journey into garden railroads and while looking into differnet companies equipment I noticed that there seems to be a few different scales that are sold. My question is do the different scales look ok together? Does an Aristocraft locomotive 1:29 look proper pulling say Bachmann's 1:22.5 or 1:20.3 rolling stock and vice versa? I am also wondering which manufacturer's equipment would be recomended by most people? I realize much of this would come to personal opinions but I am curious what people think of different brands and why.

Any answers you can give me on these subjects would be great.
  • Member since
    April 2003
  • 305,205 posts
Posted by Anonymous on Sunday, November 28, 2004 2:05 PM
Hello Rastun.
This was covered in full recently.Go to about page 7 I think. it is under-Scale? & should that really measure that much-
Should answer all your questions
Troy
  • Member since
    October 2004
  • From: Northwest Montana
  • 409 posts
Posted by Rastun on Sunday, November 28, 2004 3:25 PM
Thank you Troy, for remembering about where that thread was. It was helpful for me. I am definatley in the area of "if it looks right, it is", I want my garden railroad to be for relaxation and conversation not for it doesn't have the right amount of rivets so it's wrong. Being as I plan to model this railroad from nothing more than my imagination, I can always justify anything as to "that's just what the prototype did" [(-D] The biggest reasons I was wondering how they looked together is because, I do like some of bachmann's locomotives and I like aristo's passenger cars. Where I live I don't have a hobby shop that sells much of anything in "G" scale so I would actually have to purchase items to see what they looked like compared to each other.

Talk to you all later,
Jack
  • Member since
    August 2004
  • From: Australia
  • 84 posts
Posted by Gary Crawley on Monday, November 29, 2004 2:23 AM
Jack
[#welcome]
Don't worry to much about the scale if it's what you want to run go for it, I have never been into rivet counting. (personal choice)
I believe you should run what you like, after saying that I try to stick to 1:20 scale with mostly Bachmann geared loco's (Shay's Heisler's etc) with narrow gauge rolling stock mostly DRGW.
This suits my steep grades and and tight curves.
But remember it's your railroad so it's your choice.
All the best with the future.
Regards
Gary.
  • Member since
    February 2004
  • From: Notheast Oho
  • 825 posts
Posted by grandpopswalt on Monday, November 29, 2004 3:07 AM
Rastun,

In my opinion you'd probably be better off not mixing 1/29 and 1/32 with 1/20.3, 1/22.5, and 1/24 scale. The former tend to be models of standard gauge trains (4' 81/2" track width) while the other scales tend to be models of narrow gauge trains (3'0" between the rails). Again, in my opinion, an MTH Challenger (1/32) scale looks pretty silly on the same track with, say, a Bachmann consolidation (1/20 scale). The two model locos are both very large whereas the prototypes are vastly different in size.

It's your railroad, you run whatever looks good to you. We have one forum member that runs a Bullet train AND a tiny 0-4-0 steamer pulling little 4 wheel passenger cars, makes him happy.

Walt
"You get too soon old and too late smart" - Amish origin
  • Member since
    July 2003
  • From: Sierra Vista, Arizona
  • 13,757 posts
Posted by cacole on Monday, November 29, 2004 7:19 PM
I have the Bachmann 1:20.3 Consolidation and some AMS 1:20.3 rolling stock to go with it. If I place my Hartland Doozie Railbus next to them, it's like the difference between O and S, or S and HO scale. The Doozie is way too small compared to the Bachmann when they are side by side, but if the Doozie is out on the mainline away from the Bachmann, the difference in size is not as obvious.
  • Member since
    April 2003
  • 305,205 posts
Posted by Anonymous on Monday, November 29, 2004 11:14 PM
On indoor layouts, some people mix large scale and N gauge(for amusement park rides). Anything is possible, it's up to your imagination.
  • Member since
    April 2003
  • 305,205 posts
Posted by Anonymous on Wednesday, December 1, 2004 7:37 PM
I can only run LGB which i understand is only 22.5 so it is a moot question for me.

Regards

Ian
  • Member since
    April 2003
  • 305,205 posts
Posted by Anonymous on Thursday, December 2, 2004 7:31 AM
I don't count rivets but I do TRY to live an orderly life (doesn't always happen) so I TRY not to mix scales......its not orderly. I made the mistake of buying Bachmann's narrow gauge 2-8-0 (1:20) and it looks un-orderly pulling my 1:22 narrow gauge cars so I will eventually sell the thing.

As a person who can tell the diference between standard gauge and narrow gauge just by looking at it, I can't mix scales and feel comfortable with that. To me this is just a mish-mosh and looks more like a cartoon than a real train.

But, as the hippies said......"Different strokes for different folks" so mix several scales if you want to, its your layout.

OLD DAD

Search the Community

FREE EMAIL NEWSLETTER

Get the Garden Railways newsletter delivered to your inbox twice a month

By signing up you may also receive occasional reader surveys and special offers from Garden Railways magazine. Please view our privacy policy