Trains.com

Parts

2570 views
7 replies
1 rating 2 rating 3 rating 4 rating 5 rating
  • Member since
    July 2006
  • From: Shire Counties UK
  • 712 posts
Parts
Posted by two tone on Saturday, September 28, 2013 9:20 AM

Hi   I'm looking to get some replacement plastic dowels for the pony truck on my Bachmann 4-6-0 mine are worn at the ends and some are splitting, I live in the UK but Bachmann over here can not get spares so if any one in USA knows of a supplier please let me knowSmile 

                Age is only a state of mind, keep the mind active and enjoy life

  • Member since
    July 2003
  • From: US
  • 1,386 posts
Posted by Curmudgeon on Monday, September 30, 2013 12:26 PM

Are you referring to the spacers?

About 1/2" or 5/8" long, 1/4" diameter, hole in the centre for axles?

Locally for you, no idea.

Shipping to the UK will be more than they are worth.
Do you have sources locally for solid plastic rod?Carefully drill out the centre for a press fit of the axles, cut to length (1.575" back to back).

Barry's Big Trains used to make these on a lathe....not sure if I have any around any longer.

Parts from Bachmann would most likely include the entire truck.

Are you capable of making your own, or do we need to go on a search?

TOC

  • Member since
    July 2006
  • From: Shire Counties UK
  • 712 posts
Posted by two tone on Tuesday, October 1, 2013 9:19 AM

Hi,    Its finding a company that has the stuff I want the UK is very short on this sort of spares   

                Age is only a state of mind, keep the mind active and enjoy life

  • Member since
    March 2002
  • From: Norton, MA
  • 394 posts
Posted by piercedan on Monday, October 21, 2013 4:44 AM

How big are the spacers?

Computer mother boards have small plastic and metal  spacers.

  • Member since
    July 2006
  • From: Shire Counties UK
  • 712 posts
Posted by two tone on Monday, October 28, 2013 9:41 AM

Hi  the part I need is the part that goes between the wheels on the pony truck  IE the four wheels on a 4-6-0 engine

                Age is only a state of mind, keep the mind active and enjoy life

  • Member since
    September 2013
  • 3 posts
Posted by Pete D on Tuesday, December 3, 2013 11:03 PM

If I recall correctly the part you are looking for is a plastic spacer that keeps the two half axles (and wheels) from touching and creating an electrical short.

On the 4-6-0s I've seen the part does not bear any weight. If this is the case, have you considered using vinyl tubing with an internal diameter the same size as the half axle shaft?

If it would work you would have an inexpensive replacement part.

  • Member since
    October 2009
  • 1 posts
Posted by TrainBrainNSW on Thursday, December 5, 2013 8:19 PM

G'day from Australia, I have had the same problem and found two solutions. A. "hard" plastic irrigation or compressed air tubing of the appropriate size worked well. B. a length of nylon "bearing" rod machined on a lathe to the required size was the prefered method. No further problems with both methods for me. Regards Phil. joyphil@midcoast.com.au

  • Member since
    September 2003
  • From: YYC, CANADA
  • 59 posts
Posted by rbrr on Saturday, December 7, 2013 11:45 PM

Did you look thru their (u.s.) online catalog ?http://estore.bachmanntrains.com/index.php?main_page=index&cPath=66_69_148&zenid=qa0iq1r3f45pkak89irasufjm4

nite

"G-gauge may not Rule, But it GROWS on Ya !! " djc'99

Search the Community

FREE EMAIL NEWSLETTER

Get the Garden Railways newsletter delivered to your inbox twice a month

By signing up you may also receive occasional reader surveys and special offers from Garden Railways magazine. Please view our privacy policy