Trains.com

Artificial outdoor water

1901 views
5 replies
1 rating 2 rating 3 rating 4 rating 5 rating
  • Member since
    May 2010
  • 2 posts
Artificial outdoor water
Posted by jacks on Tuesday, July 2, 2013 11:16 AM

Anybody have ideas on how to make artificial water that will stand up to being outside??

 

  • Member since
    December 2001
  • From: Smoggy L.A.
  • 10,743 posts
Posted by vsmith on Wednesday, July 3, 2013 11:35 AM

Ahhhhhhhhhhhhhh uuummmmm.....not quite sure what you are asking, just what is it you are proposing to do Question 

Why not just use a real water featureQuestion

   Have fun with your trains

  • Member since
    January 2013
  • From: PA
  • 481 posts
Posted by Schuylkill and Susquehanna on Wednesday, July 3, 2013 12:30 PM

Us indoor railroaders usually use two-part resins to model water.  The usual stuff might not hold up to large temperature swings and UV, but perhaps some stuff that is designed to work with fiberglass, say for boats or something?

Resin takes a long time to cure, and it stays "wet" for a long time.  During drying, it will need to be covered (though not touching) to keep dust and dirt off it.  Each pour should be no more than 1/8" thick, so it will take a few pours to make a G scale water feature.  Tinting the resin can make a water feature seem deeper than it is.  Usually, each pour has less tint than the one before it, with the last pour being nearly clear.

Since you're doing it outside, why not make a real water feature?  I've even seen some indoor HO layouts with running water.

S&S

 

Modeling the Pennsy and loving it!

  • Member since
    February 2004
  • From: North, San Diego Co., CA
  • 3,092 posts
Posted by ttrigg on Thursday, July 4, 2013 2:16 AM

I’ll join the choir with why not use real water? It scales very nicely. I have found a resin that is both UV resistant and temperature proof, made by “Fahrbarhard” but at just over $20 per quart, (plus international postage) anything larger than a small stock pond is too expensive.

 

If you are after something like water spillage from a pipe (culvert) then why not do something cheap that is easily replaced yearly. Twist some clear tape and cover with spar varnish.

Tom Trigg

  • Member since
    June 2006
  • From: Oakley Ca
  • 1,407 posts
Posted by dwbeckett on Saturday, July 6, 2013 9:54 AM

Have you looked into Fiberglass resien, the type used for Boats thet should be UV resistant .

Dave

The head is gray, hands don't work , back is weak, legs give out, eyes are gone, money go's and my wife still love's Me.

  • Member since
    February 2007
  • From: Phippsburg, Maine
  • 141 posts
Posted by captain perry on Thursday, October 10, 2013 7:16 AM

I build wood-epoxy kayaks and have access to some pretty cool epoxies...they are expensive and NOT UV resistant, I do not know of any that are.  Whatever you use will probably yellow with time and loose its shineSad

perhaps a piece of window glass?

Winnegance and Quebec Railway

Eric Schade Gen'l Manager

 

Search the Community

FREE EMAIL NEWSLETTER

Get the Garden Railways newsletter delivered to your inbox twice a month

By signing up you may also receive occasional reader surveys and special offers from Garden Railways magazine. Please view our privacy policy