Trains.com

Lattice Bridge Progress Pictures

4440 views
12 replies
1 rating 2 rating 3 rating 4 rating 5 rating
  • Member since
    February 2007
  • From: Arizona (high country 7k ft) USA
  • 676 posts
Lattice Bridge Progress Pictures
Posted by Rex in Pinetop on Tuesday, December 1, 2009 12:16 AM

I'm back working on my winter building projects.  Here are some pictures of the bridge as it's being built.

First up was building the bents -

Next was a fitup to see how the parts were going to match

Once all the bents and the lattices were built it's assembly time on an interesting jig

Next was to build the railroad deck/stringer assembly

There are a lot of brass brads in this bridge which means a lot of holes to drill and fingers to pound

Next is the paint job for the timber parts of the bridge.  This took all day with my little air brush

Finally its time to put the roof on and man are there a lot shingles.  I'm only half way there in these pictures.

This is a bashed Garden Texture design.  I purchased the plans for the 35" covered bridge and made it into a 60" bridge to fit my application.  The closest thing I've found to a real bridge of this design is the Fisher Railroad Bridge in Wolcott, VT.  Garden Texture says that these bridges were covered to protect the expensive wooden timbers from the elements.  The "Town-Pratt double lattice" is so interesting I think I'm going to leave the sides mostly uncovered.  I'm also leaving the cupolas open since these were designed to be vents for the smoking steam engines.

Rex

  • Member since
    October 2005
  • From: S. Carolina Up-country
  • 279 posts
Posted by jhsimpson62 on Tuesday, December 1, 2009 7:03 AM

And the tradition of excellence lives on. Great looking bridge. Jack

  • Member since
    February 2004
  • From: North, San Diego Co., CA
  • 3,092 posts
Posted by ttrigg on Tuesday, December 1, 2009 8:36 PM

Rex:  Looks as if someone has been having entirely too much fun!  Laugh

 

Tom Trigg

  • Member since
    July 2003
  • From: S.Easton , Mass.
  • 593 posts
Posted by smcgill on Wednesday, December 2, 2009 7:31 AM
You make me sick!!! How do you do it so easily. How do you get the time. Keep up the great work! Sean

Mischief

  • Member since
    February 2007
  • From: Arizona (high country 7k ft) USA
  • 676 posts
Posted by Rex in Pinetop on Wednesday, December 2, 2009 10:50 AM

All,

Thanks for all your kind words.  I'm retired now so have lots of time to do the tedious work with a little engineering thrown in.  I've got a school and several scratch turn-outs to do this winter.  And then there is the ball diamond bleachers and lights for everything so I should be busy for awhile...

As the mortician would say "it's better to be seen than viewed".

Rex

  • Member since
    February 2004
  • From: North, San Diego Co., CA
  • 3,092 posts
Posted by ttrigg on Wednesday, December 2, 2009 6:10 PM

Rex in Pinetop
... And then there is the ball diamond bleachers and lights for everything so I should be busy for awhile...

Ahh, a "Field of Dreams". (you build it and they will come.)

Tom Trigg

  • Member since
    August 2006
  • From: central Nebraska
  • 166 posts
Posted by Jerry Barnes on Wednesday, December 2, 2009 9:02 PM

Wow, that's a work of art! 

Jerry

web site:

http://thescrr.com/

  • Member since
    August 2005
  • From: Texas
  • 182 posts
Posted by MTCarpenter on Thursday, December 3, 2009 12:10 PM

 Beautiful!  Well done.

"Measurement is the way created things have of accounting for themselves." ~ A.W. Tozer
  • Member since
    February 2007
  • From: Arizona (high country 7k ft) USA
  • 676 posts
Posted by Rex in Pinetop on Monday, December 7, 2009 9:33 PM

Thanks again for your kind words.  I finially finished it.  Here are the pics.

I won't be able to install it in the layout until spring.  Right now Pinetop is getting about 2 ft of snow.

Rex

  • Member since
    September 2003
  • From: Ivins Utah
  • 190 posts
Posted by Camaro1967 on Wednesday, December 9, 2009 6:33 AM

 Rex, that is a beautiful piece of work, and it will really look great in place. Dont forget to show it in its final resting place.  I am curious what kind of paint you used.

Paul

  • Member since
    February 2007
  • From: Arizona (high country 7k ft) USA
  • 676 posts
Posted by Rex in Pinetop on Wednesday, December 9, 2009 11:32 PM

Paul,

I use Behr Premium Weatherproofing Wood Finish and have the guys at Home Depot mix the colors for me.

Rex

  • Member since
    February 2008
  • From: Western, NY
  • 245 posts
Posted by enginear on Friday, December 11, 2009 10:00 AM

That's a great job! Joe

  • Member since
    December 2008
  • From: Central California
  • 54 posts
Posted by TJ Lee on Wednesday, December 16, 2009 2:18 PM

Looks fantastic! Nice work!

TJ

------------------------------------

TJsTrains.com - Stop by -  lots of pictures

Search the Community

FREE EMAIL NEWSLETTER

Get the Garden Railways newsletter delivered to your inbox twice a month

By signing up you may also receive occasional reader surveys and special offers from Garden Railways magazine. Please view our privacy policy