Trains.com

Timber Frame House

1247 views
4 replies
1 rating 2 rating 3 rating 4 rating 5 rating
  • Member since
    October 2005
  • From: S. Carolina Up-country
  • 279 posts
Timber Frame House
Posted by jhsimpson62 on Sunday, February 15, 2009 6:16 AM

I have recently completed construction of a Timber Frame House loosely based on the plans for "The Lumber Barons House" by Garden Texture. The pictures of the construction can be found here. A neighbor stopped by and said she wanted a real house like it. Had to tell her I didn't do "real houses" My current project is based on Garden Texture plans for their 20th street buildings. I am doing three, but building them as a signle unit You'll find some pictures of this project following the House. Jack 

  • Member since
    February 2009
  • 8 posts
Posted by cbower2 on Saturday, February 21, 2009 2:28 PM

Very nice,  Is that all cedar?  and do you seal it with anything?  I'm just getting into large scale outside and I'm blow away with the prices of manufactured kits.  I have a feeling I'll be creating many of my own but I want them to last as long as possible.

  • Member since
    February 2004
  • From: North, San Diego Co., CA
  • 3,092 posts
Posted by ttrigg on Saturday, February 21, 2009 4:27 PM

Jack:

From the name of this picture "1 Securing System".

Q?:  Are these "pins" plastic or wood?  how many do you use per building?  I'm interested in this practice.  Please provide a bit of description.  Getting a bit tierd of setting my buildings on buried bricks only to have them catch on the dogs tail and be drug across the yard.

Tom Trigg

  • Member since
    October 2005
  • From: S. Carolina Up-country
  • 279 posts
Posted by jhsimpson62 on Sunday, February 22, 2009 6:11 AM

Yes, the entire house is made from cedar. The plans call for a mixture of cedar and red wood, but red wood is all but impossible to find in this area. Everything is sealed with three coats of polly urithane(?), and  than two coats of matte finish clear lacqure to take the shine away. Other buildings have been painted and clear coated.

My securing system is really meant to keep the building erect in our ocassional heavy winds. Quite simple, a two blocks glued and screwed to opposite corners of the underside of the building with an 3/8 inch hole drilled through the center. I than glue a piece of plastic tubing into the hole. I found the plastic toilet water feed line at the local hardware store. After placing about two inches of stone dust where the building is to rest, I mark the location of the need holes by lightly sitting the building in place, than with a piece of rebar make the required holes. I fill these with portland cement (which I also mix with the stone dust to keep it from washing out in rains), and set the building in place. To date not a building has been disturbed by the wind or any stray animals running through the garden. If need for maintance, the building can be easily lifted out and than replaced. Length of tubing is normally 4 or 5 inches depending on height of building.

  • Member since
    February 2004
  • From: North, San Diego Co., CA
  • 3,092 posts
Posted by ttrigg on Sunday, February 22, 2009 2:16 PM

Thanks Jack!  Sounds like a very effective achoning system. 

Tom Trigg

Search the Community

FREE EMAIL NEWSLETTER

Get the Garden Railways newsletter delivered to your inbox twice a month

By signing up you may also receive occasional reader surveys and special offers from Garden Railways magazine. Please view our privacy policy