Trains.com

LGB F7

1451 views
4 replies
1 rating 2 rating 3 rating 4 rating 5 rating
  • Member since
    April 2005
  • 236 posts
LGB F7
Posted by Snoq. Pass RR on Tuesday, July 1, 2008 2:31 PM
I have an LGB F7 that has some stripped gears and a dead motor. Has anyone used an Aristo-Craft or USA F3 motor block as a replacement, or know where to get replacement gears and motors for less than $50?  I have already looked at Train-Li, but they are too expensive.  For that much money, I could just buy a new locomotive that has plenty of parts available.
Account abandoned
  • Member since
    July 2006
  • From: Riverside, CA
  • 181 posts
Posted by MRH044 on Wednesday, July 2, 2008 7:11 PM
   Motor and gears for under $50 - very unlikely.  I am searching for a motor for a Forney with no success. Sad [:(] It might be difficult to make the Aristo/USA motors work.  I know that Aristo uses a circuit board to connect the motor to the frame and the USA might be too small.  Thier F7 is much closer to the groung that LGB's.  If only one of the two motors is dead, you could just make that truck a dummy like the F7 B units.  Good luck to you. If you ever find a source for motors, let me know.   Michael 

http://www.haworthengineering.com/

~Excellency in the Details ~

  • Member since
    October 2006
  • From: silver spring, md
  • 1,232 posts
Posted by altterrain on Wednesday, July 2, 2008 9:29 PM

 MRH044 wrote:
   Motor and gears for under $50 - very unlikely.  I am searching for a motor for a Forney with no success. Sad [:(] It might be difficult to make the Aristo/USA motors work.  I know that Aristo uses a circuit board to connect the motor to the frame and the USA might be too small.  Thier F7 is much closer to the groung that LGB's.  If only one of the two motors is dead, you could just make that truck a dummy like the F7 B units.  Good luck to you. If you ever find a source for motors, let me know.   Michael 

That's only kind of true about Aristo two axle diesel trucks. The trucks have two set of leads coming from them. One is the power leads from the wheels the other is the power to the motor. If you wire up the two together the truck will run on its own on track power. The replacement trucks come with sideframes (ALCO style) and a mounting yoke.

http://www.nicholassmithtrains.com/store/product/770/POWER-TRUCK-U25-FA-RS/ 

-Brian 

President of
  • Member since
    July 2006
  • From: Riverside, CA
  • 181 posts
Posted by MRH044 on Thursday, July 3, 2008 3:02 PM
   I suppose I spoke too soon. I was referring to three axle blocks and just assumed they were the same. Sorry about that,   Michael

http://www.haworthengineering.com/

~Excellency in the Details ~

  • Member since
    July 2003
  • From: US
  • 1,386 posts
Posted by Curmudgeon on Thursday, July 3, 2008 8:12 PM

Give me a call.

I have two completes.

Search the Community

FREE EMAIL NEWSLETTER

Get the Garden Railways newsletter delivered to your inbox twice a month

By signing up you may also receive occasional reader surveys and special offers from Garden Railways magazine. Please view our privacy policy