Trains.com

Problem with sound in a two truck shay.

1332 views
5 replies
1 rating 2 rating 3 rating 4 rating 5 rating
  • Member since
    January 2008
  • 140 posts
Problem with sound in a two truck shay.
Posted by Mt Beenak on Thursday, January 17, 2008 4:51 AM
I have a 38 ton, two truck shay. (1:20.3)  Added new style trucks after two years running, goes better than ever.  (Love the shay and the climax!)
I used a simple 'chuffer' sound circuit for years which reacted to track voltage.  I have tried upgrading to a unit which is activated by the Shay piston activated switches, but no luck.  I get a permanent closed circuit on the board.  I loosened the two screws beside the cylinders and it works intermittently, but I cannot get it to work properly.  Any ideas would be appreciated. 
Are there quality sound boards which work off track voltage, or do I go back to the 'chuffer'?

Mick

Chief Operating Officer

Northern Timber Company - Mt Beenak

  • Member since
    July 2006
  • From: Shire Counties UK
  • 712 posts
Posted by two tone on Thursday, January 17, 2008 6:13 AM
Hi Mt Beenak  I have a Bachmann consolidation had the same sort of prob. I now use a reed switch and 2 magnets on an axcil as the wheels turn it gives me a nice sound far better than the pickup via the loco system.  If you show where abouts you are maybe someone local may be able to help         Hope tis helpsSmile [:)]

                Age is only a state of mind, keep the mind active and enjoy life

  • Member since
    January 2008
  • 140 posts
Posted by Mt Beenak on Thursday, January 17, 2008 11:28 PM

Thanks for the try, but where would I put an axle mounted magnet on a shay?  All four axles are powered and inside gearboxes.  No spare place for it!

By the way, I am in Victoria, Australia.

Mick

Mick

Chief Operating Officer

Northern Timber Company - Mt Beenak

  • Member since
    February 2003
  • From: AU
  • 320 posts
Posted by TonyWalsham on Friday, January 18, 2008 12:54 AM
Mick, If you are in Melbourne bring it down to me and I will fix it for free while you wait.

Best wishes,

Tony Walsham

   (Remote Control Systems) http://www.rcs-rc.com

Modern technology.  Old fashioned reliability.

  • Member since
    January 2008
  • 140 posts
Posted by Mt Beenak on Saturday, January 19, 2008 1:49 AM

I also posted on Bachmann forums and someone suggested a website with shay problems and solutions...

 http://www.girr.org/girr/tips/tips1/shay_tips.html#valve_gear

I took the plunge and fully dismantled the ashpan and cylinder gear.  I found at least three obvious but simple problems, fixed them all and re-assembled.  IT WORKS!   Smiley

Mick of Mt Beenak, Down Under.

Mick

Chief Operating Officer

Northern Timber Company - Mt Beenak

  • Member since
    June 2006
  • From: Oakley Ca
  • 1,407 posts
Posted by dwbeckett on Monday, March 3, 2008 9:34 AM

Thanks for the site I printed the 25 page's to take to Reno where my Shay resides so now I can get rid of that annoying tic tic. I thougth it was just mine. once agin thank's

Dave

The head is gray, hands don't work , back is weak, legs give out, eyes are gone, money go's and my wife still love's Me.

Search the Community

FREE EMAIL NEWSLETTER

Get the Garden Railways newsletter delivered to your inbox twice a month

By signing up you may also receive occasional reader surveys and special offers from Garden Railways magazine. Please view our privacy policy