Trains.com

Sound ?

924 views
7 replies
1 rating 2 rating 3 rating 4 rating 5 rating
  • Member since
    April 2003
  • 305,205 posts
Sound ?
Posted by Anonymous on Wednesday, October 10, 2007 10:51 PM

Greetings from down under (Australia)I am new to this have just ordered 2 Dash 9 Aritocraft and have a LGB Mallet but as yet no track laid

I am curious about the sound as I have noticed that on YouTube there is some great clips and the sound from the locos are amazing

Can you advise how do you fit it, and where do you get the equiptment and how does it all work

Sorry for the newby question

Thanks 

 

  • Member since
    February 2007
  • From: Arizona (high country 7k ft) USA
  • 676 posts
Posted by Rex in Pinetop on Wednesday, October 10, 2007 11:28 PM
  • Member since
    October 2006
  • From: silver spring, md
  • 1,232 posts
Posted by altterrain on Thursday, October 11, 2007 12:30 AM

Its very complicated!

also try here - http://www.girr.org/girr/tips/tips6/sound_tips.html

you can also get good advice for the Dash 9's over at the Aristo forums - http://www.aristocraft.com/vbulletinforums/index.php 

 -Brian 

President of
  • Member since
    March 2003
  • From: AU
  • 77 posts
Posted by DannyS on Thursday, October 11, 2007 3:00 AM

I have used Sierra Sound Units in my locomotives, purchased from Gauge One Gallery in Sydney,

where in Oz are you, I am in Brisbane, Queensland.  Sierra units are very simple to fit. 

 

  • Member since
    July 2006
  • From: Shire Counties UK
  • 712 posts
Posted by two tone on Thursday, October 11, 2007 10:20 AM
Hi, i`m sure you would be very pleased with the pheonix sound i use it its very easy to install and i found if i had a prob you can talk to them about it they are most helpful. hope this helpsSmile [:)] Can I recomend that you use LGB track, mine as been down for 6 years and i`ve not had a problem and i`ve altered it a few times

                Age is only a state of mind, keep the mind active and enjoy life

  • Member since
    April 2003
  • 305,205 posts
Posted by Anonymous on Thursday, October 11, 2007 9:02 PM
If you are like me and don't want to spend a lot of money, try this site.  I have two of these units--one in my 0-4-0 and one in my Bachmann Annie.  Very nice sound and the installation is simple.            http://www.smallscalerailway.com/
  • Member since
    October 2006
  • From: silver spring, md
  • 1,232 posts
Posted by altterrain on Friday, October 12, 2007 12:59 AM

 two tone wrote:
Hi, i`m sure you would be very pleased with the pheonix sound i use it its very easy to install and i found if i had a prob you can talk to them about it they are most helpful. hope this helpsSmile [:)] Can I recomend that you use LGB track, mine as been down for 6 years and i`ve not had a problem and i`ve altered it a few times

It would be difficult to use LGB track as it is not currently in production!

-Brian 

President of
  • Member since
    March 2002
  • From: Norton, MA
  • 394 posts
Posted by piercedan on Tuesday, October 16, 2007 2:15 PM

Which LGB mallet, some came with sound, mine is the newest version with sound and MTS.

I have the SD-45's with Sierra sound and they are awesome.  A friend has Pheonix sound in his and it is hard to tell the difference. 

 

Search the Community

FREE EMAIL NEWSLETTER

Get the Garden Railways newsletter delivered to your inbox twice a month

By signing up you may also receive occasional reader surveys and special offers from Garden Railways magazine. Please view our privacy policy