Trains.com

snow on the KMRR

875 views
9 replies
1 rating 2 rating 3 rating 4 rating 5 rating
  • Member since
    December 2007
  • From: NJ (Kittatinny Mountains)
  • 436 posts
snow on the KMRR
Posted by SNOWSHOE on Tuesday, November 18, 2008 6:36 AM

Got our second snow of the season.  First snow was 14 inches too much to run trains. This was more manageable (I think i spelt that wrong)

  • Member since
    July 2006
  • From: Shire Counties UK
  • 712 posts
Posted by two tone on Tuesday, November 18, 2008 8:44 AM

Hi Snowshoe,

                  Looks like its comming to my side of the pond this weekend, they say it`s going to be -10f over here and that is cold for us.  So may be we will get some white stuff, it would be nice to have a white christmas, can`t remember the last time we had one

 

                Age is only a state of mind, keep the mind active and enjoy life

  • Member since
    February 2004
  • From: North, San Diego Co., CA
  • 3,092 posts
Posted by ttrigg on Tuesday, November 18, 2008 4:49 PM

Shawn

Don't forget to put a bit of "extra" coal in the tender while snow is on the ground. You know the Conductor and Brakeman are going to grab a pail or two for the potbelly in the caboose. Add a few lumps for yourself.

Tom Trigg

Moderator
  • Member since
    November 2008
  • From: London ON
  • 10,392 posts
Posted by blownout cylinder on Tuesday, November 18, 2008 7:01 PM

OK. Just what do you do when the snow hits the fan? What gets stored, etc? Track maintenence? I'm sort of new in this....Confused

Any argument carried far enough will end up in Semantics--Hartz's law of rhetoric Emerald. Leemer and Southern The route of the Sceptre Express Barry

I just started my blog site...more stuff to come...

http://modeltrainswithmusic.blogspot.ca/

  • Member since
    February 2004
  • From: North, San Diego Co., CA
  • 3,092 posts
Posted by ttrigg on Tuesday, November 18, 2008 7:27 PM

blownout cylinder
OK. Just what do you do when the snow hits the fan? What gets stored, etc? Track maintenence? I'm sort of new in this....Confused 

You do things like this. http://www.youtube.com/watch?v=NgvxUFge2GU 

Most (Not all) of us bring the trains inside when not running, any time of the year.  A large number, especially those of us living in warmer climes leave the buildings outside all year.

Tom Trigg

  • Member since
    April 2003
  • 305,205 posts
Posted by Anonymous on Wednesday, November 19, 2008 5:15 AM

Looks cooool man! No snow in Texas yet!

Toad

  • Member since
    December 2007
  • From: NJ (Kittatinny Mountains)
  • 436 posts
Posted by SNOWSHOE on Wednesday, November 19, 2008 10:06 AM

blownout cylinder

OK. Just what do you do when the snow hits the fan? What gets stored, etc? Track maintenence? I'm sort of new in this....Confused

I dont store anything,  Structres stay out, that way they can get weathered.  the rolling stock stays in the tunnel or on the siding.  Thats what I like about the hartland mini series.  You can leave them out and if anything happens to them I can just get new ones since they only cost 9-14 bucks. Very unlikley anything will happen to them unless I step on one. I really like the weathered used look anyway. 

The important lesson I learned is make sure the track is clear of leaves before the snow hits.  That way you can pget the train going without any prep.  Other than that it is no different then any other day.  Of course you have to love the cold and snow like me.   

 

  • Member since
    December 2007
  • From: NJ (Kittatinny Mountains)
  • 436 posts
Posted by SNOWSHOE on Wednesday, November 19, 2008 10:08 AM

ToadFrog&WhiteLightn

Looks cooool man! No snow in Texas yet!

Toad

Thanks toad.  We had snow showers/flurries all day yesterday.  Today we had a low of 20 degrees F with a wind chill of 0.  Now it is up to 27.  Some more snow in forcast for tonight and tomorrow.  Cant wait

  • Member since
    December 2001
  • From: Smoggy L.A.
  • 10,743 posts
Posted by vsmith on Wednesday, November 19, 2008 10:33 AM

Looks like your next project should be a snowplow Wink

   Have fun with your trains

  • Member since
    December 2007
  • From: NJ (Kittatinny Mountains)
  • 436 posts
Posted by SNOWSHOE on Wednesday, November 19, 2008 1:00 PM

vsmith

Looks like your next project should be a snowplow Wink

I was just thinking about that today.  I have small gondala from the hart mini series.  Im thinking about trying to fit that with a plow.  I have some nice PVS pipe already cut in half.  Now I just need to fit two sides together to get the angle and then figure a way  to attach it to the Gond. 

Search the Community

FREE EMAIL NEWSLETTER

Get the Garden Railways newsletter delivered to your inbox twice a month

By signing up you may also receive occasional reader surveys and special offers from Garden Railways magazine. Please view our privacy policy