Edit post

Edit your reply below.

Post Body
Enter your post below.
Two things: First, what bman36 is correct about checking out the Automotive Body Shop Paint suppliers for Laquers. Pittsburg Paint and Glass (PPG), Rinshed-Mason (RM) and DuPont were the original primary suppliers of this stuff, and other have followed in order to maintain original automotive coatings even for restoration or maintenence purposes. But depending on where you are and how thorough your store is, you MAY have to order it. Ask to see a catalog of older (1980's on back)automotive factory issue colors and materials. A true Body Shop Supplier worth his salt will be able to lay hands on this, or tell you where you can. As to color, Laquers have always come in either Transparent (Clear), Opaque (Solid color), or Metallics which is a sort of combination of the two with metal dust (Ususally Aluminum) suspended within. However,clear Laquer with NO color dye can also be applied over a Water based color coat once the water based paint dries thoroughly. It CANNOT be applied over any Alkyd type of enamel as it will actually break this type of paint up at the molecular level, wrinkle it and lift it as if it had been subjected to paint remover. If you can't find a colored "clear" Laquer, try a clear coat over a water color. Incidently, Aqua-Net Hair Spray IS in fact Nitro-cellulose Laquer, (as opposed to Acrylic) and while it is quite thin in consistency, CAN be used as a clear coat over other non-Alkyd coatings for weather and "touch" protection. It is also fairly resistant to heat once dried and cured. As is also many Clear Finger Nail Polishes. In fact, this last, might just do the trick for running lights by dipping the bulb into the Nail Polish AFTER the water color has dried thoroughly. You might want to actually cut the Nail polish with about 50% Laquer Thinner first. Even tho Nail Polish remover is actually Acetone, DON'T use this to thin the nail polish with. It WILL thin it, but it will wipe out the water base also when you apply it. The trick is getting the water color to stick to the slick glass of the bulb. You might try twisting the bulb in fine steel wool first, or one of those newer kitchen scour throw away pads since they actually cut and scratch glass better than steel wool. (You know, those little square blue or green guys.)
Tags (Optional)
Tags are keywords that get attached to your post. They are used to categorize your submission and make it easier to search for. To add tags to your post type a tag into the box below and click the "Add Tag" button.
Add Tag