A.C. Voltmeters for track voltage monitoring

[eZAK]

Lee,

It sounds like your well on your way.

If you get a chance try some http://www.warsteiner-usa.com/indextall.jsp 

[phillyreading]

Got my volt meters mounted and some wiring done, putting them in a panel is very nice. Also checked to make sure they work.

You mention at the bottom of your post to have a home brew, me I prefer to have Doppfel Boch biere or a Pilsner Biere from Germany, I think they are good beers.

Lee F.

[eZAK]

cruikshank,

Check my post at the top of this page. (2) It has stock numbers and links.

And as John pointed out, they also have amp meters.

[jefelectric]

Just came across these AC amp meters.

http://www.allelectronics.com/cgi-bin/item/PMA-15A/385/15A_AC_PANEL_METER_.html

 

[cruikshank]

Lee, what part numbers and meters did you order?  I want to try some at the club layout. Were you able to get an AC amp panel meter also?  Thanks,  Dave

[phillyreading]

Don't know how well they work yet, only tested meter to see if it read voltage today, as I just got the first voltmeter out of four to be shipped today and I built a panel out of quarter inch paneling that I cut with a hole saw for the meters to go into.  Put a piece of 2 by 4 under the paneling when I cut it with the backside up to keep it from ripping the paneling on the front, sanded the holes with a dremel tool with a wire brush attachment.   Probally be a few days before I have everything wired up to it, also going to put toggle switches in it for track block monitering.

Lee F.

[eZAK]

Great Lee,

Let us know how those meters work for you.

[phillyreading]

eZak,

I just ordered the volt meters from the first company, it seems that I had to be in their system before I could place an order, takes at least a day to get on the system or so it seems.

Lee F.

[BobbyDing]

QUOTE DSMITH:

If you are knowledgable enough you can open up the meters and customize the volt or amperage range.  I have done this and my mainline amps now read 0 - 4 amps instead of 0 - 10 amps.

I love the look of your setup. You gave me an idea for a new thread. Can you elaborate on your statement above? What's involved in modifying the older meters? Do they have internal adjustments, or are you adding components to force them to display a modified value?

 Thanks,

 Bobby

[dsmith]

I have pruchased 5 vintage panel meters off Ebay (search under panel meters AC) at very reasonable prices ($5 - $15).  They look perfect with my 1950's Lionel Postwar layout.  Triplett and Simpson are the big names and they are excellent quality meters with bakelite housings and glass fronts (compare this with modern plastic housed meters that can be scratched and will break more easily than the old ones).  If you are knowledgable enough you can open up the meters and customize the volt or amperage range.  I have done this and my mainline amps now read 0 - 4 amps instead of 0 - 10 amps.   You can also purchase DC voltmeters and convert them to read AC volts by using a bridge rectifier.

Here is a view of the control panel on my layout.

This set of Triplett meters is used to continuously monitor voltage and amperage of one mainline.  The AC amp meter on the left has been changed to read 0 - 4 ampsAC.  I haven't made new graphics for the voltmeter on the right yet, but the 0 - 300 VDC meter now reads 6 - 20 VAC as an expanded scale AC voltmeter.  The left 6 position rotary switch controls how many diodes are in use across decline block to slow the trains descent.  The right 6 positon rotary switch is to control the uncoupling tracks.  I have my uncoupling sections wired as pairs, so I can control up to 12 upcoupling sections with just one 90 pushbutton switch.

The left 2 Simpson meters are to monitor my 2nd mainline.  Again the 0 - 10 ampAC meter was converted to read 0 - 4 ampsAC.  The 0 - 25 VDC meter was converted to read 6 - 20 VAC.  The meter on the right monitors all current flow to the layout and is a 0 - 10 ampAC meter and was not changed.

[eZAK]

There is also a Hoyt distributor in Daytona,

http://davidsonsales.com/

[eZAK]

Lee,

They both have them. I don't know why the Newark site didn't work for you but I have odered from them in the past, as well as Allied.

The meter at Allied electric is stock # 378-0065, Hoyt mfg. #CK920-AVV-25, 2.5" 0-25vac, surface mount. They have 5 in-stock at $22.84 ea.

This link should take you there; http://www.alliedelec.com/Search/ProductDetail.asp?SKU=378-0065&SEARCH=&MPN=CK920%2DAVV%2D25&DESC=CK920%2DAVV%2D25&R=378%2D0065&sid=469963804C40617F

Newark list the same one by Hoyt but with a 28 day lead time. Newark pt. #84K7338

[phillyreading]

Thanks for the info eZak, but the first company would not allow me to order from the website, don't know why.  The second company don't have volt meters for less than 150 volt range.

Lee F.

[eZAK]

For analog 0-25 vac panel meter Try here;

http://www.newark.com/jsp/search/productdetail.jsp?SKU=84K7338&CMP=AFC-TL10000001

Or

http://www.alliedelec.com/Search/ProductDetail.asp?SKU=378-0065&SEARCH=&MPN=CK920%2DAVV%2D25&DESC=CK920%2DAVV%2D25&R=378%2D0065&sid=469963804C40617F

 

[phillyreading]

spikejones52002,

I live down by West Palm Beach FL or should I say Scalper City as far as prices go for electrical stuff, panel style meters would cost me $78.00 plus tax down here new.

Not many Flea Markets left down here or they sell jewelry or fake flowers.

Lee F.

 

[Dave Farquhar]

Back to the original question of the thread... I did a quick eBay search and found several analog AC voltmeters for around $15 including shipping. They're panel-mount, so you'd be able to hook them up without more unsightly wires. I couldn't find any that were 0-25 volt (which would be ideal), but I did find some 0-50 volt meters. That wouldn't be so bad--you should be able to tell the difference between 16v and 18v on that. I wouldn't want to use one of the 0-300v meters I found because I'm not so sure I'd notice a drop of 2 volts on one of those.

Someone I know found a couple of very old analog voltmeters, probably dating to the 1940s or very early 1950s, on eBay once. They had Bakelite cases, much like a lot of the older Lionel transformers, so they looked very good in front of his Lionel layout. I don't see anything like that on eBay right now, but I sure liked the look of the stuff he found.

[Yog-Sothoth]

You are a rivit counter.

I was just suggesting a easy way to see what his trains were doing.

My suggestion are easy to do and inexpensive and would work over the long term.

Dude, talking about the merits of methods of measuring voltage in a thread devoted to measuring voltage is not "rivet counting." Bob is giving us some very clear and useful information.

[spikejones52002]

Phillyreading

I do not know where you live. Around Chicago area there are many Electronic Swap meets & Model RR Flea markets where you can find a very large varity of meters to fill your desire.

I hope I was helpfull.

[lionelsoni]

I would not, but if I were going to try to insult someone by calling him a rivet counter, I would spell it correctly and do it in a more moderate typeface.

Anyone who has seen my layout knows that I am not one. 

[spikejones52002]

You are a rivet counter.

I was just suggesting a easy way to see what his trains were doing.

My suggestion are easy to do and inexpensive and would work over the long term.

[lionelsoni]

Did I say I was fooling around with meters?  I have no meters attached to my layout.  I do own an oscilloscope; but it sits on my workbench.

The errors I was describing in using rectifiers and DC meters have nothing to do with the forward drop of the diodes; they are inherent in that technique of measurement.  I described the nature of the limitations of the rectifier method of measuring AC voltage and current as a caution to those who want to do it for themselves.

Lee, I wouldn't use one either; but I think it would work for someone who didn't mind how it looked.

[phillyreading]

I can't imagine why a multimeter would care whether you measured continuously.  In a half-century of using them, I have never heard of one's failing for that reason.

Bob,

The other part of the reason I don't want a multimeter is that it looks too bulky and needs to be front wired, in other words it looks too tacky to me or ugly!.  I want something like a panel meter with wiring capabilities on the backside of it.

Lee F.

[spikejones52002]

Lionelsoni From what I do not understand from your replys.

Why are you fooling around with meters at all?

The precision you require for your Laboratory Lionel is a dual channel Oscillascope.

With an Ampprobe and a  voltage probe you can continiously monitor  Amperage and Voltage with no lose.

For me the .7 volt drop across each of the bridge diode has very little effect.

[lionelsoni]

The bridge-rectifier ammeter will indeed reduce the track voltage, actually by a little more than a volt, but it won't rectify the track voltage.  Only the current through the meter is rectified, the way Spike proposed it.

The way AC voltage is measured is in RMS volts.  (And AC current is measured in RMS amperes.)  An AC voltage of 120 volts RMS delivers the same power to a resistive load, like an incandescent lamp, as a DC voltage of 120 volts, for example.  But the AC voltage, if it is sinusoidal, as it usually is, actually has a peak voltage of 170 volts 120 times each second, and spends much of its time below 120 volts.

"RMS" stands for "root mean square".  It is the square root of the average over a complete cycle of the square of the instantaneous voltage.  RMS voltage is not what virtually all AC voltmeters, analog or digital, actually measure.  What they measure is the average of the absolute value of the instantaneous voltage, because that is far simpler to do.  For the same waveform, these are proportional to each other.  So, if you know the waveform you can calibrate the simpler meter circuit to indicate RMS voltage for that waveform.  The measurement is not valid for any other waveform.  The waveform universally assumed is a sine wave.

So it is not true that "A D.C. amp meter connected between the D.C. terminals of a bridge rectifier will give you a true amprage reading..."  Since it is calibrated for DC current, it will read about 90 percent of the RMS current.

When the voltage or current waveform is far from sinusoidal, readings with any conventional meter designed for a sine wave can be substatially in error, as in the example of the phase-control waveform of the CW80.

[dsmith]

 

 

[spikejones52002]

Lionelsoni an A.C. digital multimeter across an A.C. load will read true A.C. just like a analog A.C. meter.

A D.C. amp meter connected between the D.C. terminals of a bridge rectifier will give you a true amprage reading and you will have A.C. to your load.

But if the gentleman wants an analog meter and not digital. That is his choice. I only made a suggestion.

I use a digital meters for all my requirements execept to observe the movement of my switch machines. Then it is easer to watch the swing of the needle.

[lionelsoni]

I can't imagine why a multimeter would care whether you measured continuously.  In a half-century of using them, I have never heard of one's failing for that reason.

[phillyreading]

Harbor Freight sells Digital Volt meters for under $5.00.

The A.C. range will give you a two digit measurement.

It also has a 10 amp range. Place a large bridge rectifier in series and the Amp meter across the D.C. terminals.

Just got back from Harbor Frieght and all they have is digital multimeters for $3.99.

I am looking for just a volt or amp meter even analog will do at a great price.  The reason that I want a regular panel type meter is that a multimeter may short out under constant useage, to the best of my knowledge a multimeter is just for a few minute use not for long term like I want.

Lee F.

 

[Anonymous]

I wonder how the new Voltmeter cars from K Line will do? They look cool but are they practical? I just might consider one for the heck of it.