auto carriers

[Andrew Falconer]

The Lionel O Gauge Auto Carriers were offered in a good amount of road names, but they still have quite a few road names and paint scheme variations left to offer from the 1960's and 1970's.

Andrew

[aiireland]

I run a combination of scale and tradional size stuff, and i'm willing to compromise to run the stuff that i like.  But some of the scale items do seem to overpower my tradional stuff. saying that i think i will pick-up a few auto carriers and hope that one day i'll have a larger layout.

btw, i just got back from San Diego (first time to Cali) and checked out the Model Railroad Museum.  Both the toy train and O scale layout were very nice.  N scale layout was equally cool. 

[Andrew Falconer]

The ATLAS O Articulated Auto Carrier has settings to allow it to be operated on different radius curves.

The new MTH PREMIER Freight Cars have Brakeline Air Hoses on all the trucks.

Andrew

[og3rail]

I recently attended a Greenberg Model Railroad show in Raritan, NJ. On one of the operating hi rail layouts they had a unit auto carrier train running on it. I am still trying to find out who made these auto carriers I thought they might be MTH but the couplers had the air hose's on them. I thought Atlas made an autocarrier that was not articulated that had 3 positions that you could locate the trucks depending on the curve radius of your layout.

 

[chuck]

I love when I see posts about wanting something like a GG-1 or a Big Boy to run on O-54 or tighter curves.  Maybe if they made them with shells/body castings like a slinky you could pull this off

There is now a posting on another web site about folks wanting 18" scale Budd RDC cars.  You could have scale cars (that would be 21" long) or you could have near scale (aka 18" cars), but you can't have both unless you want a really rare/odd Budd RDC combine baggage/RPO car.

O gauge 1/48 is big.  If you want to run modern scale stuff, you need a lot of real estate. 

[lionelsoni]

That's my point, Chuck, that even something as short as an F3 needed curves so gentle that most of us couldn't possibly fit them onto our layouts.

[chuck]

An F3 could handle a 274-foot radius, which works out to O139.

By itself.  F-3 is pretty short, 50' 8", shorter than most modern era box cars.  The auto carriers are supposed to be 89 feet long. 

[Andrew Falconer]

To properly use the Auto Carriers on O54 curves the sound effect of wheels scraping on rails has to heard each time the cars roll past.

Andrew

[lionelsoni]

An F3 could handle a 274-foot radius, which works out to O139.

[chuck]

Too many conversions, too tired.  Thanks.

[challenger3980]

I dragged out a section of Gargraves O-54 and set one of my 18" near scale passenger cars on it for the following two snap shots.  While the cars are perfectly capable of navigating O-54 (and quite possible O-42), I personally find the appearance a little disturbing. 

 

 

If the over/underhang aren't an issue, go for it. In general these types of cars really need O-72 to look "right" and the tightest curves you would find on a real railroad that would accomodate cars like this works out to O-120 (yes, 12 feet in diameter).  Typcal protype curves are more like O-240 (aka 24' in diameter).

 

       Actually Chuck, no 0-120 is only 10 feet in diameter, and 0-240 would only be 20 feet in diameter, still one heck of a big curve, wouldn't we all love to have room for a layout with 0-240 curves.

[Andrew Falconer]

That is why I decided to buy O-72 Track. Less equipment restrictions. but it takes space.

Andrew

 

[chuck]

I dragged out a section of Gargraves O-54 and set one of my 18" near scale passenger cars on it for the following two snap shots.  While the cars are perfectly capable of navigating O-54 (and quite possible O-42), I personally find the appearance a little disturbing. 

 

 

If the over/underhang aren't an issue, go for it. In general these types of cars really need O-72 to look "right" and the tightest curves you would find on a real railroad that would accomodate cars like this works out to O-120 (yes, 12 feet in diameter).  Typcal protype curves are more like O-240 (aka 24' in diameter).

[Andrew Falconer]

If you like generally Scale proportions, then the MTH Premier Auto Carriers will work on O54 curves. Three behind a single SD40-2 or DASH 8 will look fine if you have a unit train of 5 to 6 Gondolas or Hoppers also on the layout. Many short trains pulled by one locomotive is a way to create the frenzy of a busy mainline.

Andrew

[chuck]

MTH racks are 18" long.  They will have severe overhang problems on O-54 curves.  The Lionel products are not to scale but will look better on O-54 since they are shorter (aka not to scale).

[aiireland]

thanks for the info.  I understand that these auto carriers are going to be big, but do you think they would look silly if say 2 or 3 of them were behind a single SD40 or Dash-8?  My layout is on the small to average size, O54 curves, 5.5 feet by 14 feet.  the MTH carriers look possible.

ai

[Andrew Falconer]

Lionel made some TTGX auto racks in 1992; but, since the prototypes are quite large, they are very much undersized.  The three types I have are BN-16217, UP-16228, and GTW-16242.

The Lionel Trains Inc. Auto Carrier with Corrugated Screens is just over 12" Long. This Auto Carrier would measure about 64' Long in S Scale and about 87' Long in HO Scale. The height of the Lionel Auto Carrier with Screens is right for S Scale or Traditional O Gauge Cars.

Andrew

[Andrew Falconer]

This is one of the pages of MTH Premier Auto Carriers released over the past year.

Premier  Erie Lackawanna   Corrugated Auto Carrier	Premier  SOO Line   Corrugated Auto Carrier
Premier  Canadian National   Corrugated Auto Carrier - Canadian National Car no	Premier  Canadian National   Corrugated Auto Carrier - Canadian National Car no
Premier  Amtrak   75' AutoTrain Auto Carrier	Premier  Amtrak   75' AutoTrain Auto Carrier
Premier  Auto Train   75' AutoTrain Auto Carrier	Premier  Canadian National   75' AutoTrain Auto Carrier
Premier  BNSF   Corrugated Auto Carrier	Premier  Richmond Fredericksburg & Potomac   Corrugated Auto Carrier

BACK : - | Page 2 | Page 3 | Page 4 | Page 5 | : NEXT

[Andrew Falconer]

Lionel made some TTGX auto racks in 1992; but, since the prototypes are quite large, they are very much undersized.  The three types I have are BN-16217, UP-16228, and GTW-16242.

Those Lionel O Gauge Auto Carriers with Corrugated Screens are about the same length as a Walthers HO Scale Auto Carrier with Screens.

The MTH Premier O Scale Auto Carrier with Corrugated Screens has a design very similar to the Walthers HO Scale Model.

Andrew

[Andrew Falconer]

NEW ROAD NUMBERS! O ARTICULATED AUTO CARRIER (Please Contact Your Atlas O Dealer) Built in 1997 by Thrall for TTX, the Articulated Auto Carriers were designed to haul new trucks, vans or SUVs from assembly plants and distribution facilities to dealer lots. Fully assembled and ready-to-run, Atlas O's true 1/4" scale models stretch at a whopping 35" in length and are packed with many realistic details. Features: True 1/4" scale details and dimensions Die-cast chassis Operating end doors Interior deck Articulated diaphragm with three curvature settings (O-42, O-54, O-63+) Separately-applied wire grab irons 70-ton roller-bearing trucks properly located on chassis Full brake line details as per the prototype Minimum diameter curve: 42" (3-Rail) Minimum radius curve: 36" (2-Rail) Four road numbers are available per road name.  3-RAIL ITEM# DESCRIPTION 2-RAIL ITEM# 6291E TTX #880113, #880155 7291E 6291F TTX #880222, #880238 7291F 6292E Union Pacific† #880005, #880051 7292E 6292F Union Pacific† #880058, #880071 7292F 6293E Norfolk Southern #110111, 110140 7293E 6293F Norfolk Southern #110154, #110216 7293F

†Union Pacific licensed product MSRP 3-rail: $124.95 MSRP 2-rail: $131.95

[chuck]

Atlas, articulated, scale.  MTH, covered, near scale (75'), modern non-articulated are 89' long, aka about 4" longer. 

[lionelsoni]

Lionel made some TTGX auto racks in 1992; but, since the prototypes are quite large, they are very much undersized.  The three types I have are BN-16217, UP-16228, and GTW-16242.

[aiireland]

Does anyone make modern articulated or corrugated auto carriers that are standard or scale?  I looked through some past Lionel catalogs and found nothing but their tradional line or flat cars with vehicles.  MTH archived catalogs on their web site were loading too slow or not at all. 

thanks, ai