Doug's Tip is very good, I have also found that using a 6 to 8 inch piece of fishing line to be very effective. Also been playing with the Bullfrog Snot, (google search for more info), seems OK but pricey.
Don
The truck sides on the MTH locomotives I own have two screws holding them in place. The two screws on MTH's newer trucks can be easily accessed when the locomotive is turned upside down. The truck sides on some of my older MTH locomotives require taking the shell off, then disconnecting the can motor from the truck, then you can get at the two screws that hold the truck sides in place.
Goodluck..............Rick
dougdagrump Steamers are a breeze to replace but the diesels can be a real pain. I use two heavy duty paper clips that were straightened out and made a small hook on the end, kinda like a real small sheperds hook, also a generous bend on the other end to serve as a handle. Use the two of these to more or less pull the tire around both sides at the same time starting on the upper edge closest to the chassis and also the hardest area to get to. This seems to work quite all on all my diesels but the MOST difficult one is the Lionel C-420's, the side frames are real close to the wheels. This one just requires a LOT more patience than the others. " src="http://cs.trains.com/trccs/emoticons/icon_smile_grumpy.gif">
Steamers are a breeze to replace but the diesels can be a real pain.
I use two heavy duty paper clips that were straightened out and made a small hook on the end, kinda like a real small sheperds hook, also a generous bend on the other end to serve as a handle. Use the two of these to more or less pull the tire around both sides at the same time starting on the upper edge closest to the chassis and also the hardest area to get to.
This seems to work quite all on all my diesels but the MOST difficult one is the Lionel C-420's, the side frames are real close to the wheels. This one just requires a LOT more patience than the others. " src="http://cs.trains.com/trccs/emoticons/icon_smile_grumpy.gif">
Doug.......Found this by doing a search. Thanks again, for the umpteenth time for posting the two hook procedure.
Celebrating 18 years on the CTT Forum.
Buckeye Riveter......... OTTS Charter Member, a Roseyville Raider and a member of the CTT Forum since 2004..
Jelloway Creek, OH - ELV 1,100 - Home of the Baltimore, Ohio & Wabash RR
TCA 09-64284
This seems to work quite all on all my diesels but the MOST difficult one is the Lionel C-420's, the side frames are real close to the wheels. This one just requires a LOT more patience than the others.
Remember the Veterans. Past, present and future.
www.sd3r.org
Proud New Member Of The NRA
God bless TCA 05-58541 Benefactor Member of the NRA, Member of the American Legion, Retired Boss Hog of Roseyville , KC&D Qualified
I've read a number of articles, plus Dick Teal's recent book on modern Lionel repair, for info about replacing traction tires on diesels. The first step is always: "give yourself access to 360 degrees of the wheel--you may have to remove the sidebars." My question is, how do you remove sidebars on most diesels? Most of mine seem to be riveted to the frame. Removing rivets seems like a pretty drastic (and not easy) step to do something as simple as a traction tire swap.
John
Our community is FREE to join. To participate you must either login or register for an account.
Get the Classic Toy Trains newsletter delivered to your inbox twice a month