Kadee Electro Uncoupler Installation, etc.

[Anonymous]

As a novice I'd appreciate some advice regarding my O scale 2-rail layout under contruction; namely, the best method to install my Kadee #810 Electro Uncouplers. I understand that there's a way to increase the power of these units with the result that they can be mounted under the track without the need to cut a hole through the track itself. This sounds great if true. Also, I have the Lionel SC-2 Switch & Accessory Controller which I hope to use to control the four Kadee 810's but so far have only a rough idea as to how to go about it.  Any advice would be very welcome!

[palallin]

Not too many folks hereabouts are 2-ralers or use Kadees.  You might get some help over on the MR forum, but most there are HO or N scalers and know little about O. 

 Sign up for a couple or Yahoo email lists, the Otrains and the Oscalekings (there are others, but these two will do for a start).  There you will find oodles of info.

[phillyreading]

You can try Ready To Roll in Miami for info, www.readytorolltrains.com  or you may try OGR (O gauge Trains)forum as they are dedicated more to O gauge in two rail.

Lee F.