Trains.com

Smoke Fluid in Old Steamer

884 views
12 replies
1 rating 2 rating 3 rating 4 rating 5 rating
  • Member since
    November 2003
  • From: Saint James, Long Island, NY
  • 666 posts
Posted by msacco on Tuesday, June 6, 2006 2:27 PM
I use pellets and fluid as well. And yes it does last longer using the combo IMHO. JT's with the repro pellets is a nice combo for lasting smoke but you have to watch the scent combinations. I use JT's vanilla with the traditonal pellets and It's a little funky but not offensive.

Mike Sacco
  • Member since
    October 2005
  • 41 posts
Posted by pmilazzo on Monday, June 5, 2006 10:24 PM
I run my 2025 on smoke fluid even though it has a pellet unit. I just use 4 drops of JT MegaSteam and she smokes up the house...I also have the replacement pellets, but I have not used them since the smoke output is much better on fluid and there's no residue.

One warning though...No more than 3 to 4 drops at a time! If you flood the unit, it will be a big mess inside the engine. It can also unlubricate your gears (since it's a solvent) and cause havoc with your E-Unit (talking from experience).

Some guys I know run both on the smoke pellets and a drop or two for fluid for increased output...sort of best of both worlds..In their opinion, you get the longer lasting smoking from one pellet (hours instead of minutes) and increased smoke when you want it by adding a drop or two as well. I haven't tried this...
  • Member since
    October 2003
  • 390 posts
Posted by SPFan on Monday, June 5, 2006 7:54 PM
One caveat though. If you put in a few drops of fluid and get little smoke you might have to clean out the old pellet residue from the smoke unit. To do this you have to remove and disassemble the smoke unit being careful not to damage the heating element. Once cleaned out it will smoke as well or better with fluid than with pellets.

Pete
  • Member since
    January 2006
  • 193 posts
Posted by gottcent on Monday, June 5, 2006 9:10 AM
Thanks to everyone for the helpful advice!
John Gottcent
  • Member since
    February 2004
  • From: Rolesville, NC
  • 15,416 posts
Posted by ChiefEagles on Friday, June 2, 2006 10:47 PM
I mix it for my diesels. Three parts JT's [diesel smell] and one part Lionel. In my steamers, coal fired from JT's. Lots use flavors and sents.

 God bless TCA 05-58541   Benefactor Member of the NRA,  Member of the American Legion,   Retired Boss Hog of Roseyville Laugh,   KC&D QualifiedCowboy       

              

  • Member since
    December 2001
  • From: US
  • 1,475 posts
Posted by overall on Friday, June 2, 2006 7:40 PM
What brand of smoke fluid does everyone like? I am using LGB fluid right now.

George
  • Member since
    November 2003
  • From: Saint James, Long Island, NY
  • 666 posts
Posted by msacco on Friday, June 2, 2006 6:49 PM
I use JT MEgasteam in the pellet unit on my 2016 (converted to smoke so it's more like a 2018, thanks to ebay) and it actually smokes better than with a regular smoke pellet. Go figure.

Mike Sacco
  • Member since
    February 2004
  • From: Rolesville, NC
  • 15,416 posts
Posted by ChiefEagles on Friday, June 2, 2006 4:38 PM
QUOTE: Originally posted by gottcent

This is a really dumb question, but is it possible to use smoke fluid in an old (1948) steamer equipped for smoke pellets? What happens if you use fluid without converting to a more recent smoke unit?


Gottcent, no question, that you do not know the answer, is a dumb question on this forum. Ask away anytime. As Ben says, a few drops at the time. Been using them for years. If you are nervious about it, go to Bob's suggested web site and buy some pills. Happy railroading and keep on posting. [:)]

 God bless TCA 05-58541   Benefactor Member of the NRA,  Member of the American Legion,   Retired Boss Hog of Roseyville Laugh,   KC&D QualifiedCowboy       

              

  • Member since
    December 2001
  • From: Austin, TX
  • 10,096 posts
Posted by lionelsoni on Friday, June 2, 2006 3:54 PM
You can get smoke pellets from these folks:
http://www.toytrainsunlimited.com/

Bob Nelson

  • Member since
    January 2005
  • 1,991 posts
Posted by Frank53 on Friday, June 2, 2006 3:47 PM
Blasphemy! [:P]
  • Member since
    April 2003
  • 305,205 posts
Posted by Anonymous on Friday, June 2, 2006 3:46 PM
Ditto that. Easter
  • Member since
    January 2003
  • From: Frankfort, Kentucky
  • 1,758 posts
Posted by ben10ben on Friday, June 2, 2006 1:34 PM
It's perfectly ok to use liquid in a unit designed for pellets. I, along with plenty of other people I know of, do it all the time. Just don't put more than two or three drops down the stack or you'll end up overfilling the unit and leaking fluid all over the rails.
Ben TCA 09-63474
  • Member since
    January 2006
  • 193 posts
Smoke Fluid in Old Steamer
Posted by gottcent on Friday, June 2, 2006 12:07 PM
This is a really dumb question, but is it possible to use smoke fluid in an old (1948) steamer equipped for smoke pellets? What happens if you use fluid without converting to a more recent smoke unit?

Join our Community!

Our community is FREE to join. To participate you must either login or register for an account.

Search the Community

FREE EMAIL NEWSLETTER

Get the Classic Toy Trains newsletter delivered to your inbox twice a month