Trains.com

Type or grade of plywood to use for decking?

1396 views
7 replies
1 rating 2 rating 3 rating 4 rating 5 rating
  • Member since
    January 2006
  • From: Mid Atlantic
  • 614 posts
Posted by Birds on Saturday, March 11, 2006 10:27 PM
Thanks for the input guys! Lots of good information.

This gives me plenty to work with as I shop.

Enjoy,
Birds
  • Member since
    November 2015
  • 3,584 posts
Posted by Sturgeon-Phish on Saturday, March 11, 2006 7:16 PM
My choice is OSB. It has a rough side and a smooth side. You can actually screw closer to the edge on OSB than 3 ply plywood. Construction techniques has 24" on center with 1/2" OSB. With the quality of plywood going down I use OSB almost all the time. Lays flatter and takes moisture better.
Jim
  • Member since
    December 2003
  • From: Central PA
  • 2,536 posts
Posted by jefelectric on Saturday, March 11, 2006 7:07 PM
One caution, if you are using CDX, is to make sure your benchwork is very sturdy as most of the CDX you get now days will warp something awful when it is brought into the house due to temperature changes. I actually used AC on my last layout to get a more stable product. OSB is actually more stable but not as strong. You need to install it on bench supports no less than 16" spacing in my opinion. OSB has replaced plywood for most uses in home construction.

One other point, unless you are talking to an oldtimer at one of the big box stores they probably won't know anything about homosote. You are better off trying to get it at a local lumber yard.
John Fullerton Home of the BUBB&A  http://www.jeanandjohn.net/trains.html
  • Member since
    November 2005
  • From: Greenacres WA
  • 176 posts
Posted by c50truck on Saturday, March 11, 2006 6:56 PM
Birds,
The BC will give you the best face for the lowest cost if your attaching right to the plywood. CDX works fine if your covering it. Also check around. If your cutting the plywood to smaller pieces, buy mistrim plywood. Any Independent lumber source will have it, not sure if the big box carry it. Can save some change.

Homasote is also known as "Building Board" or "Sound Board". Should be readily available everywhere. The white-faced version of Homasote is used by many as bulletin board material.

Rod
  • Member since
    November 2003
  • From: Sandy Eggo
  • 5,608 posts
Posted by dougdagrump on Saturday, March 11, 2006 6:33 PM
Birds, If homasote is difficult to get how about 2x4 ceiling tile. It won't hold fasteners as well but if you use ballast with white glue the fasteners shouldn't be an issue.

Remember the Veterans. Past, present and future.

www.sd3r.org

Proud New Member Of The NRA

  • Member since
    April 2003
  • 305,205 posts
Posted by Anonymous on Saturday, March 11, 2006 5:21 PM
OSB would also work and is often cheaper than plywood.
  • Member since
    December 2001
  • From: Austin, TX
  • 10,096 posts
Posted by lionelsoni on Saturday, March 11, 2006 5:18 PM
I use BC, with the B side up. But I fasten my track directly to the plywood. If you're going to cover it with homasote or something else, I don't see why CDX wouldn't do.

Bob Nelson

  • Member since
    January 2006
  • From: Mid Atlantic
  • 614 posts
Type or grade of plywood to use for decking?
Posted by Birds on Saturday, March 11, 2006 4:55 PM
Why type, or grade, of plywood do people recommend to use for decking on a train board? Sheathing grade, B grade, A-1 grade?

I finally tracked down a source for Homasote - 30 miles away. None of the folks working at the nationally based home center stores had even heard of Homasote.

Enjoy,
Birds

Join our Community!

Our community is FREE to join. To participate you must either login or register for an account.

Search the Community

FREE EMAIL NEWSLETTER

Get the Classic Toy Trains newsletter delivered to your inbox twice a month