85 K-line cars knuckle opens up on curves

phillyreading

Member since
January 2005
From: Lake Worth FL
4,014 posts

Posted by phillyreading on Friday, February 17, 2006 11:10 AM

The problem appears to be in the trucks but I have solved the problem by replacing the K-Line reease with a Lionel release pin looks the same except that the Lionel pin is about 1/64 of an inch longer and holds the coupler in better. Like jaabat mentioned you can always change the trucks out to Lionel.
Lee in West Palm Beach FL

Interested in southest Pennsylvania railroads; Reading & Northern, Reading Company, Reading Lines, Philadelphia & Reading.

Reply

Jumijo

Member since
January 2005
From: New England
6,241 posts

Posted by Jumijo on Friday, February 17, 2006 5:19 AM

I have an MTH reffer that was doing the same thing. Come to find out, the die cast coupler wasn't closed all the way. They take more force than the plastic ones. If that's not your problem, Lionel sells die cast replacement trucks with couplers. Two different styles to choose from. Replace the trucks.

Jim

Modeling the Baltimore waterfront in HO scale

Reply

Big_Boy_4005

Member since
December 2003
From: St Paul, MN
6,218 posts

Posted by Big_Boy_4005 on Friday, February 17, 2006 1:51 AM

It sounds like it has a weak spring holding the pin in place. Can you tie it off?

I'm back!

Follow the progress:

http://ogrforum.ogaugerr.com/displayForumTopic/content/12129987972340381/page/1

Reply

Boyd

Member since
August 2004
From: St. Paul, Minnesota
2,116 posts

85 K-line cars knuckle opens up on curves

Posted by Boyd on Friday, February 17, 2006 1:23 AM

I have a C&O K-line coal car and have had lots of trouble with one of the couplers opening up on curves when there is even only a few cars behind it. Ideas?

Modeling the "Fargo Area Rapid Transit" in O scale 3 rail.

Reply

Join our Community!

Search the Community

FREE EMAIL NEWSLETTER