Trains.com

K-Line Berkshire problem.

799 views
8 replies
1 rating 2 rating 3 rating 4 rating 5 rating
laz 57
  • Member since
    October 2004
  • From: Millersburg, Pa.
  • 7,607 posts
K-Line Berkshire problem.
Posted by laz 57 on Sunday, January 8, 2006 7:00 PM
I have a K-line Bershire that came out a few years ago. It has TMCC Cruise controll and all the goodies.
The problem I am having is that I cannot get it to run any faster then about mid range speed. I don't have instructions on how to reprogram it. Does anyone no the sequence for this and is there anything else I should do to correct this problem?
Thanks.
laz57
There's a race of men that don't fit in, A race that can't stay still; Robert Service. TCA 03-55991
Report Abuse Back to Top
Anonymous
  • Member since
    April 2003
  • 305,205 posts
Posted by Anonymous on Sunday, January 8, 2006 9:11 PM
How are you running? TMCC remote, TMCC w/ the DCS remote, ect?
Report Abuse Back to Top
laz 57
  • Member since
    October 2004
  • From: Millersburg, Pa.
  • 7,607 posts
Posted by laz 57 on Monday, January 9, 2006 6:19 AM
TMCC remote.
laz57
There's a race of men that don't fit in, A race that can't stay still; Robert Service. TCA 03-55991
Report Abuse Back to Top
Anonymous
  • Member since
    April 2003
  • 305,205 posts
Posted by Anonymous on Monday, January 9, 2006 11:04 AM
Have you tried a factory reset? Instructions are in the manual.
Report Abuse Back to Top
laz 57
  • Member since
    October 2004
  • From: Millersburg, Pa.
  • 7,607 posts
Posted by laz 57 on Monday, January 9, 2006 11:15 AM
NO as I said before I do not have the manuel.
laz57
There's a race of men that don't fit in, A race that can't stay still; Robert Service. TCA 03-55991
Report Abuse Back to Top
Anonymous
  • Member since
    April 2003
  • 305,205 posts
Posted by Anonymous on Monday, January 9, 2006 12:45 PM
Loco reset: "ENG#"- "AUX 1"- "0"
Report Abuse Back to Top
ben10ben
  • Member since
    January 2003
  • From: Frankfort, Kentucky
  • 1,758 posts
Posted by ben10ben on Monday, January 9, 2006 3:42 PM
It sounds like you have it programed with a maximum speed. The easiest way to clear this out is to first hit set, run the engine(with no load) to the fastest speed it can safely run, and then hit boost. The horn will blow, and it will stop, with a new maximum speed programed.
Ben TCA 09-63474
Report Abuse Back to Top
laz 57
  • Member since
    October 2004
  • From: Millersburg, Pa.
  • 7,607 posts
Posted by laz 57 on Tuesday, January 10, 2006 6:32 AM
Thanks GIZ, I will try.
laz57
There's a race of men that don't fit in, A race that can't stay still; Robert Service. TCA 03-55991
Report Abuse Back to Top
Anonymous
  • Member since
    April 2003
  • 305,205 posts
Posted by Anonymous on Monday, January 23, 2006 6:33 PM
Hi, this is off the subject but be careful with cowcatchers on your k-line Berkshires they are just soldered on and only on the underside. They will not withstand hard bumps against a track bumper.

Scott R. Conforto
Report Abuse Back to Top

Join our Community!

Our community is FREE to join. To participate you must either login or register for an account.

Search the Community

FREE EMAIL NEWSLETTER

Get the Classic Toy Trains newsletter delivered to your inbox twice a month

SIGN UP
Watch our videos on YouTube Find us on Facebook Find us
on Facebook
More great sites from Kalmbach Media
Terms Of Use | Privacy Policy | Copyright Policy