Trains.com

Restoring Accessories

718 views
5 replies
1 rating 2 rating 3 rating 4 rating 5 rating
  • Member since
    December 2003
  • From: St Paul, MN
  • 6,218 posts
Posted by Big_Boy_4005 on Friday, December 2, 2005 10:30 AM
Marx had one with the bell on the post. Got one of them too.[;)]
  • Member since
    December 2003
  • From: St Paul, MN
  • 6,218 posts
Posted by Big_Boy_4005 on Friday, December 2, 2005 10:24 AM
The 155 is a more unusual piece, only made for 2 years. It is more sought after by collectors, and in nice condition fetches substantially higher prices than the commons, which were made for many years.

However, if it is well rusted, much of the collector value is gone. Then only the play value remains, so it might as well look good and work well for you.
  • Member since
    April 2003
  • 305,205 posts
Posted by Anonymous on Friday, December 2, 2005 10:21 AM
sorry i just looked up the 155 its not the one...this one has a visioble bell on the post....I'll need to figure out what it is when it arrives...
  • Member since
    April 2003
  • 305,205 posts
Posted by Anonymous on Friday, December 2, 2005 10:12 AM
Thanks for the info!

I am getting both the 154 and the 155...

Why did you say to leave the 155 alone? I'd like to paint it...its pretty rusted..bell and all...
  • Member since
    December 2003
  • From: St Paul, MN
  • 6,218 posts
Posted by Big_Boy_4005 on Friday, December 2, 2005 10:06 AM
I'm assuming that the crossing signal in question is a Lionel 154 style or other common type. Perhaps the most unusual signal is 155 with the flashing lights and bell. If the 155 is what you have, it might be best to leave it alone. Anything else, go for it.

To repaint raised letters, a small brush with a slightly steady hand would be my first choice. You could try putting paint on a scrap of wood, and pressing it against the raised part, but this can be trickier than it sounds, and result in under or over applying the paint.

Rust: a wire wheel in a Dremel might be the best tool for the job. Depending on the size and location of the rusted area, sandpaper of increasing grits might work.
  • Member since
    April 2003
  • 305,205 posts
Restoring Accessories
Posted by Anonymous on Friday, December 2, 2005 8:52 AM
okay I'm the newbie floating around so please bear with me!!

I recently purchased some accessories off of Ebay and will want to restore them a bit....

One of the items is a flashing crossing sign from Lionel...

1. What is the best way to remove rust from these tiny items?
2. How can I repain the crossing "X" sign and have it come out semi-nice? (since the letters are raised, I assume there may be a technique for doing this)
3. Repainting..any tips?

Also if you have any other useful info which I haven't covered, please share!!

Thanks everyone!!

Join our Community!

Our community is FREE to join. To participate you must either login or register for an account.

Search the Community

FREE EMAIL NEWSLETTER

Get the Classic Toy Trains newsletter delivered to your inbox twice a month