Trains.com

MTH and Lionel compatability?

8257 views
8 replies
1 rating 2 rating 3 rating 4 rating 5 rating
  • Member since
    April 2003
  • 305,205 posts
MTH and Lionel compatability?
Posted by Anonymous on Friday, November 25, 2005 12:26 PM
This may be a dumb question, but I really do not know. Are MTH and Lionel cars compatable with each other? I guess the same could be asked about any of the different manufacturers and Lionel. Also can Lionel cars hook up to say MTH engines? Thanks guys.

Larry
  • Member since
    December 2001
  • From: Austin, TX
  • 10,096 posts
Posted by lionelsoni on Friday, November 25, 2005 12:31 PM
Yes.

Bob Nelson

  • Member since
    April 2003
  • 305,205 posts
Posted by Anonymous on Friday, November 25, 2005 12:52 PM
Love those short and sweet answers. Thanks Bob.

Larry
  • Member since
    April 2003
  • 305,205 posts
Posted by Anonymous on Friday, November 25, 2005 4:24 PM
Operation wise they all work together fine. Visually some people object to Railking cars next to post war Lionel as they are higher. "Premier" cars would be out of scale with postwar and RailKing. Williams cars are the same proportion as Lionel postwar and look good with them. Weaver cars are all scale. K-Line has both scale and traditional size,so does Lionel.

Dale Hz
  • Member since
    April 2004
  • From: Holland
  • 1,404 posts
Posted by daan on Friday, November 25, 2005 4:55 PM
It works with analog engines. If you go digital, TMCC and DCS (?) are 2 different types of languages which don't communicate. In Europe there is a system which has the possibility to communicate to every available digital protocol for european standards (Márklin motorola, Lenz (roco) and FMZ (Fleischmann)) but I don't know if something like that is available for the protocol's used in american trains.

The engines all have different ways of starting up. An MTH engine (normal non-digital operation) starts in Neutral, Williams always in forward etc, but they all can be used with the same transformer and all have the same type of coupler. (The h0 european operators are jealous on that, they have no less then 12 different, not fitting couplers!!)
Daan. I'm Dutch, but only by country...
  • Member since
    March 2003
  • From: US
  • 16 posts
Posted by MACADO on Friday, November 25, 2005 10:36 PM
Lionel post war and modern are completly compatable. So is DCS and TMCC, if you have the adaptor cord. Some of the Lionel post war cars are almost S-guage in size, and MTH cars are larger, don't worry about that. There YOUR trains...........
  • Member since
    April 2003
  • 305,205 posts
Posted by Anonymous on Saturday, November 26, 2005 6:20 AM
Yes, MTH and Lionel cars are compatable with each other, as are Williams, K-Line, Weaver, Atlas, and a host of others. As noted by others here, there can be size differences between various makes, but if your question was would they all couple and operate together, the answer is "yes" they will.
  • Member since
    April 2003
  • 305,205 posts
Posted by Anonymous on Saturday, November 26, 2005 3:05 PM
This is a great topic for beginners like myself. I've been trying to find an answer to this same question. I just picked up a Lionel Sante Fe Fast Freight RTR set and I expect to expand it. I've been eyeing some MTH models and I was wondering about the compatibility. I would love to get the MTH wireless remote control but I was worried about that product not being able to control my Sante Fe. Is it possible to use it with Lionel trains?
  • Member since
    December 2004
  • 3,176 posts
Posted by csxt30 on Saturday, November 26, 2005 4:52 PM
YES, tough I don't have the MTH DCS system yet, I can run my MTH on Lionels' TMCC system in conventional mode. Here is a link to help I hope !
http://www.trains.com/Content/Dynamic/Articles/000/000/003/603gizjw.asp

Join our Community!

Our community is FREE to join. To participate you must either login or register for an account.

Search the Community

FREE EMAIL NEWSLETTER

Get the Classic Toy Trains newsletter delivered to your inbox twice a month