Trains.com

lionel transfer table

730 views
3 replies
1 rating 2 rating 3 rating 4 rating 5 rating
  • Member since
    January 2005
  • 259 posts
lionel transfer table
Posted by cheech on Wednesday, October 26, 2005 4:11 PM

Does anyone know if it is possible to power the tranfer table or it's extension, such that the table is always powered and one track can be a pass-thru?

  • Member since
    July 2003
  • From: North Texas
  • 5,707 posts
Posted by wrmcclellan on Wednesday, October 26, 2005 11:28 PM
Cheech,

I do not have one of these units. Looking at the electrical diagrams shows that one could simply bypass the controller and connect the lead to the center rail of the rail bed assembly (red lead in the drawings - which is normally connected to the B terminal on the controller) and this would cause the center rail of the transfer table platform assembly (where the loco sits) to be energized everytime the platform is aligned with a set of tracks (the bed assembly apparently has an insulater on it's center rail to control this). Thus bypassing the controller as described should allow you to use the table as a run through track.

Go here to see the electrical drawings yourself.

http://pictures.olsenstoy.com//searchcd31.htm?itm=287

Good luck. Regards,
Roy

Regards, Roy

  • Member since
    January 2005
  • 259 posts
Posted by cheech on Thursday, October 27, 2005 10:00 PM
THANKS ROY,
I'LL GIVE IT A TRY AND LET YOU KNOW HOW I COME OUT
  • Member since
    September 2003
  • From: West coast, USA
  • 356 posts
Posted by rlplionel on Thursday, October 27, 2005 10:25 PM
Hope it works for you. The transfer table is one of my favorite accessories.



Robert
http://home.surewest.net/rlplionel/Robert.htm

Join our Community!

Our community is FREE to join. To participate you must either login or register for an account.

Search the Community

FREE EMAIL NEWSLETTER

Get the Classic Toy Trains newsletter delivered to your inbox twice a month