Trains.com

Replacing broken knuckle couplers

2703 views
6 replies
1 rating 2 rating 3 rating 4 rating 5 rating
  • Member since
    March 2004
  • 1,774 posts
Replacing broken knuckle couplers
Posted by Dr. John on Saturday, October 22, 2005 3:40 PM
I have two K-Line engines that I bought used a while back - an old S-2 and an MP-15. Both are in good shape except they are both missing a coupler. Apparently they were dropped at some point in time. [B)]

My question is two-fold :

One - who supplies replacement couplers?

Two - how do you go about installing the replacement on the above mentioned locomotives.

Any insight would be greatly appreciated! [:)]
  • Member since
    December 2003
  • From: St Paul, MN
  • 6,218 posts
Posted by Big_Boy_4005 on Saturday, October 22, 2005 3:58 PM
John is the whole coupler head and arm broken off or damaged, or are you just talking about replacing a knuckle only? You may need to get the parts from K-line if the head or shank is broken off.

Knuckles themselves may be interchangable between manufacturers.
  • Member since
    August 2003
  • From: Delray Beach, FL
  • 311 posts
Posted by andregg1 on Saturday, October 22, 2005 5:12 PM
Hi
Can you show me a pictures?
Andre.
  • Member since
    July 2003
  • From: Watkinsville, GA
  • 2,214 posts
Posted by Roger Bielen on Saturday, October 22, 2005 5:52 PM
Dr. John, when I've needed something for my K-Line equipment I've found calling, or e-mailing, K-Line the best. I haven't seen any ads for K-Line repair parts and unless your near a "SuperStore" I doubt any dealers would have any.
Roger B.
  • Member since
    August 2003
  • 6,434 posts
Posted by FJ and G on Sunday, October 23, 2005 5:14 AM
John's question is a good one. I don't have the answers he needs but it would be nice to see a CTT article on this. I have couplers that work perfectly, like on my MTH passenger cars and I have others that are real stinkers.

Since I'm building a very wide radius layout, I'm likely to do a slow replacement of all of my couplers with kadees, which are supposed to be much more reliable (if your trackwork is smooth).

But knowing how to replace a broken or missing coupler and which companies make replacement parts is definitely a good question and worth a bump up to top.
  • Member since
    March 2004
  • 1,774 posts
Posted by Dr. John on Sunday, October 23, 2005 8:23 AM
In both instances, the coupler has broken at the shank which is still attached to the pilot/truck. I will contact K-Line about replacement couplers (should have thought of that myself). Have any of you done a coupler "transplant?"

Thanks for the replies!
  • Member since
    August 2003
  • From: Delray Beach, FL
  • 311 posts
Posted by andregg1 on Sunday, October 23, 2005 8:54 AM
Yes I did, but i don't know the k-line couples.
if you want can you show a pictures.
thanks
Andre.
QUOTE: Originally posted by Dr. John

In both instances, the coupler has broken at the shank which is still attached to the pilot/truck. I will contact K-Line about replacement couplers (should have thought of that myself). Have any of you done a coupler "transplant?"

Thanks for the replies!

Join our Community!

Our community is FREE to join. To participate you must either login or register for an account.

Search the Community

FREE EMAIL NEWSLETTER

Get the Classic Toy Trains newsletter delivered to your inbox twice a month