Trains.com

k-line allegeny

751 views
7 replies
1 rating 2 rating 3 rating 4 rating 5 rating
  • Member since
    April 2003
  • 305,205 posts
k-line allegeny
Posted by Anonymous on Tuesday, October 11, 2005 6:34 PM
any body own one of these? Curious as to how the run, smoke and how's the horn?
  • Member since
    October 2004
  • From: Millersburg, Pa.
  • 7,607 posts
Posted by laz 57 on Wednesday, October 12, 2005 9:03 AM
I don't own one but saw them at the train shops. To me they look kind of small as far as O gauge is concered even 0-27 for that matter, but it might be great for some people.
laz57
  There's a race of men that don't fit in, A race that can't stay still; Robert Service. TCA 03-55991
  • Member since
    April 2003
  • 305,205 posts
Posted by Anonymous on Wednesday, October 12, 2005 9:07 AM
Some people say it's closer to S gauge.
  • Member since
    April 2003
  • From: Willoughby, Ohio
  • 5,231 posts
Posted by spankybird on Wednesday, October 12, 2005 9:09 AM
Laz is correct on the size. It is 1/64 ( S gauge) on O gauge trucks. Others have reported that they are good runners. I can't say how the smoke is.

I am a person with a very active inner child. This is why my wife loves me so. Willoughby, Ohio - the home of the CP & E RR. OTTS Founder www.spankybird.shutterfly.com 

  • Member since
    February 2004
  • 76 posts
Posted by winrose46 on Wednesday, October 26, 2005 10:18 AM
I have one and purchased it without cruise control. That version worked until one of the drivers failed (front I think). I had the cruise control kit and followed its instructions and it did not fix the problem. Sent it back to Kline they fixed it (the kit did not say the wires between the lead and back motors needed to be reversed). It worked for a while (less than a week) and the other driver failed. I sent it back and got it back and it has been working ok for the past 4 months. My one complant with it is that it is jerky at slow speeds.
  • Member since
    July 2003
  • From: Wisconsin
  • 2,877 posts
Posted by Bob Keller on Wednesday, October 26, 2005 10:37 AM
We reviewed it in our Nov 03 issue. Per Bob Grubba at the time, he said that the Allegheny was 1:58 scale and the Big Boy (reviewed in the Jan 03 issue) was 1:64.

Bob Keller

  • Member since
    April 2003
  • 305,205 posts
Posted by Anonymous on Wednesday, October 26, 2005 7:23 PM
I have one in the C&O roadname. Had it about 3 months and it runs great. Smoke has the fan unit and performs great, no complaints..Tim
  • Member since
    March 2004
  • From: Ft. Knox, KY
  • 151 posts
Allegheny
Posted by GPJ68 on Wednesday, October 26, 2005 8:29 PM
I've had one for close to a year now, and it's by far my favorite loco - and my only "high dollar" loco, the rest are either Williams or PostWar (and a few Beeps). Smokes enough for me, doesn't fill the room with a choking plume like some other makes I've seen. Sounds are great IMHO, but I don't have anything else (with a sound board) to compare it to. Scale is 1:58 (NOT 1:64) and looks great pulling a string of postwar/non-scale cars, would probably look small with scale ones. It will pass cleanly through Lionel O27 switches, but watch the overhang on curves less than O42. I don't have TMCC yet, but the Lionel guys at the train show I bought it at (lightly used) graciously let me test it out on their TMCC demo circle - VERY COOL, to a non-command guy like me. Having this engine is the only reason I'll someday add TMCC to my layout (once I rebuild it after the move to SC). Ultra-slow speed is a problem, but normally is on a conventional-only (non-command) layout. Actually not much of a problem for me, since I prefer speed over scale crawling. The pilot has had an occasional problem with jumping on a K-Line switch or two, but I believe that's more switch than loco related. Mine is a pre-cruise model, so no comment there, other than I have no desire to add it. Handled my rough-as-a-cob tubular trackwork fine without any stalls, although I did trim a little off the drawbar to stop some occasional grounding on the center rail.

GPJ

Join our Community!

Our community is FREE to join. To participate you must either login or register for an account.

Search the Community

FREE EMAIL NEWSLETTER

Get the Classic Toy Trains newsletter delivered to your inbox twice a month