Trains.com

Monday photo fun

1574 views
17 replies
1 rating 2 rating 3 rating 4 rating 5 rating
  • Member since
    April 2004
  • From: Holland
  • 1,404 posts
Monday photo fun
Posted by daan on Monday, October 3, 2005 5:02 PM
Because sunday the forum was not in the air, I thought it might be nice to post some pictures on mondy. Just to make the start of the week a bit better..

The new rectifier at the crossing. As you whatch closely, you'll see the light working too..

It's in the evening and the rectifier rumbles out of the tunnel at the west side of the station.

Meanwhile on the southern junction a train has derailed. The crane has sent for help and lifts the car back onto the tracks.

A huge train with a Gp and an sd28 is heading for the canyon. Both diesels have to work hard to get the train through the sharp curves in the mountaintrack.

The rectifier pics the last sunbeams while crossing the bridge

The rails are clear again, so the work train is back to where it came from. (a cardboard box under the layout[:D])

I also have some short movies, but I can't get them on the website.. Too big (2mb for a 10 sec movie) If anyone wants them, I can email some..
Daan. I'm Dutch, but only by country...
  • Member since
    March 2004
  • 1,774 posts
Posted by Dr. John on Monday, October 3, 2005 5:09 PM
Daan,

Nice pics! Thanks for sharing them.
  • Member since
    December 2004
  • 3,176 posts
Posted by csxt30 on Monday, October 3, 2005 5:26 PM
Yes, very nice Daan ! I used to work on a steam wrecker when I first hired out on the Penn Central. Was hard work, but we had a coach & my favorite was the diner car ! The cooks made some really good food then. Thanks for sharing those pics. John
  • Member since
    December 2004
  • 3,176 posts
Posted by csxt30 on Monday, October 3, 2005 5:39 PM
Here are my 3 new Ind. Rail covered hoppers I got this weekend at the train show. Thanks, John
  • Member since
    April 2003
  • From: Willoughby, Ohio
  • 5,231 posts
Posted by spankybird on Monday, October 3, 2005 7:08 PM
Here are the new and old log cars.









I am a person with a very active inner child. This is why my wife loves me so. Willoughby, Ohio - the home of the CP & E RR. OTTS Founder www.spankybird.shutterfly.com 

  • Member since
    April 2003
  • 305,205 posts
Posted by Anonymous on Monday, October 3, 2005 8:02 PM
here is a nice picture of a shay in cass west virginia
  • Member since
    April 2003
  • 305,205 posts
Posted by Anonymous on Monday, October 3, 2005 8:54 PM
Here is my 2020 turbine before the carpet flyer came down.


my pink n-gauge thats in my room. I need to get around and paint this[:)]
  • Member since
    August 2003
  • From: Delray Beach, FL
  • 311 posts
Posted by andregg1 on Monday, October 3, 2005 9:11 PM
Nice pictures guys!
Dann I saw that do use old marklin stuff thats right?
I have two markling O gauge turnout and they match perfect with lionel stuff.
derailiment free!
but they are manual.
good job
Andre.
  • Member since
    April 2004
  • From: Holland
  • 1,404 posts
Posted by daan on Tuesday, October 4, 2005 4:14 AM
QUOTE: Originally posted by andregg1

Nice pictures guys!
Dann I saw that do use old marklin stuff thats right?
I have two markling O gauge turnout and they match perfect with lionel stuff.
derailiment free!
but they are manual.
good job
Andre.

That's right Andre, I have old Märklin tracks. It's cheap to get and there are is plenty of it around in europe, unlike the Lionel tracks. There are 2 different turnouts. The ones marked with "8" and the ones with "12". It indicates the turnout radius. The 12 ones have a small problem when running Williams engines, but the problem is in the engines themselves. The pickup rollers move downwards too much and get stuck where the tracks leading into the frog. Simply reduce downward movability in the pickup rollers to solve that.
The old Märklin switches can't be easily rebuilt for electric operation. I rebuild mine for operation with bowden cable's, which is also working great. The 12 turnout I have is an electric one and only works with one coil. The mechanism inside works like a ballpoint. One push from the coil is curve, the next push from the coil is straight again. Works also trouble free, but an indication on the switches position is not possible when the switch is out of visibility.
Derailments are scarce, but if they occur, a slight bending of the guiding rails near the frog is mostly the best solution. See my website for more information.
Daan. I'm Dutch, but only by country...
  • Member since
    April 2003
  • 305,205 posts
Posted by Anonymous on Tuesday, October 4, 2005 5:29 AM
my latest find this summer.http://im1.shutterfly.com/procserv/47b5ce20b3127cce943576418e7b00000016108AYtWzJo1buThttp://im1.shutterfly.com/procserv/47b5ce20b3127cce943576418e7b00000016108AYtWzJo1buT
  • Member since
    April 2003
  • From: Willoughby, Ohio
  • 5,231 posts
Posted by spankybird on Tuesday, October 4, 2005 6:04 AM
Magoo - welcome to Monday Photo Fun

For instructions on post photos, click here

Photo Posting



BTW - here is your pic


very nice engine

Daan - great shots of your layout.

I am a person with a very active inner child. This is why my wife loves me so. Willoughby, Ohio - the home of the CP & E RR. OTTS Founder www.spankybird.shutterfly.com 

  • Member since
    February 2001
  • From: US
  • 338 posts
Posted by waltrapp on Tuesday, October 4, 2005 6:06 AM
I can't share a nice close up shot this week like the above. Nice pictures guys.

All I have is some overall shots. This is what I call the 'front'. It's my only walkway thru the living room. Need to shrink it!


Kids didn't know they could eat coal before this! [:D]


And I continue showing the overall sketch to leave of sense of where the picture was taken:


- walt
  • Member since
    March 2004
  • From: Jelloway Creek, OH - Elv. 1100
  • 7,578 posts
Posted by Buckeye Riveter on Tuesday, October 4, 2005 7:17 AM
The Baltimore, Cincinnati & Wabash Railroad, The Only Passenger Service Serving Central Ohio




Celebrating 18 years on the CTT Forum. Smile, Wink & Grin

Buckeye Riveter......... OTTS Charter Member, a Roseyville Raider and a member of the CTT Forum since 2004..

Jelloway Creek, OH - ELV 1,100 - Home of the Baltimore, Ohio & Wabash RR

TCA 09-64284

  • Member since
    August 2003
  • From: Delray Beach, FL
  • 311 posts
Posted by andregg1 on Tuesday, October 4, 2005 8:27 AM
Hi Daan
Can you send me your web side address?
Thanks in advance.
Andre.
QUOTE: Originally posted by daan

QUOTE: Originally posted by andregg1

Nice pictures guys!
Dann I saw that do use old marklin stuff thats right?
I have two markling O gauge turnout and they match perfect with lionel stuff.
derailiment free!
but they are manual.
good job
Andre.

That's right Andre, I have old Märklin tracks. It's cheap to get and there are is plenty of it around in europe, unlike the Lionel tracks. There are 2 different turnouts. The ones marked with "8" and the ones with "12". It indicates the turnout radius. The 12 ones have a small problem when running Williams engines, but the problem is in the engines themselves. The pickup rollers move downwards too much and get stuck where the tracks leading into the frog. Simply reduce downward movability in the pickup rollers to solve that.
The old Märklin switches can't be easily rebuilt for electric operation. I rebuild mine for operation with bowden cable's, which is also working great. The 12 turnout I have is an electric one and only works with one coil. The mechanism inside works like a ballpoint. One push from the coil is curve, the next push from the coil is straight again. Works also trouble free, but an indication on the switches position is not possible when the switch is out of visibility.
Derailments are scarce, but if they occur, a slight bending of the guiding rails near the frog is mostly the best solution. See my website for more information.
  • Member since
    October 2004
  • From: 15 mi east of Cleveland
  • 2,072 posts
Posted by 1688torpedo on Tuesday, October 4, 2005 9:12 AM
Super Photo's Everyone!
Keith Woodworth........Seat Belts save lives,Please drive safely.
  • Member since
    August 2003
  • 6,434 posts
Posted by FJ and G on Tuesday, October 4, 2005 11:10 AM
Wow, cool pictures, guys.

The layout I built in 3 weeks will be dismantled this weekend so I can put my full concentration into planning for my pond and waterfalls in the backyard, along with an outside 3-rail pike that will be my final layout (until I get restless again, at least).

Here are the last pictures I'll show of the world's fastest built and dismantled layout (diorama using 027 rails):





  • Member since
    April 2004
  • From: Holland
  • 1,404 posts
Posted by daan on Tuesday, October 4, 2005 4:35 PM
QUOTE: Originally posted by andregg1

Hi Daan
Can you send me your web side address?
Thanks in advance.
Andre


Hi andre,
The website can be reached by clicking the "web-icon" which is on the
bottom of every post I make.
Or: http://communities.zeelandnet.nl/data/lionel if the browser picks it up as website
adress. Not everything is translated yet, so if you have further questions. feel free to email me.
Daan. I'm Dutch, but only by country...
  • Member since
    April 2003
  • 305,205 posts
Posted by Anonymous on Tuesday, October 4, 2005 8:08 PM
Thanks tom, will try again.

Join our Community!

Our community is FREE to join. To participate you must either login or register for an account.

Search the Community

FREE EMAIL NEWSLETTER

Get the Classic Toy Trains newsletter delivered to your inbox twice a month