Trains.com

TAS LCR Software ready for YORK

895 views
10 replies
1 rating 2 rating 3 rating 4 rating 5 rating
  • Member since
    April 2002
  • 20 posts
TAS LCR Software ready for YORK
Posted by lionel2341 on Saturday, September 24, 2005 9:24 AM
Hi Gang, The Long awaited LCR (Layout Control Software) package is ready and will be at YORK for sale. We are really Excited about this. Please stop by theTAS booth and see it.

Ernie

TAS R&D Engineer
  • Member since
    March 2004
  • From: Jelloway Creek, OH - Elv. 1100
  • 7,578 posts
Posted by Buckeye Riveter on Saturday, September 24, 2005 7:47 PM
Hey, Ernie, why do you seem to only post on CTT when you have an announcement to promote a TAS product? Your products are great, but you and your colleagues absence is noticeable.

Your last post stated the following:
QUOTE: Originally posted by lionel2341

Lionel did announce TMCC 2 @ the O-Gauge friday forum meeting. It will be backwards compatable and will be well worth the wait. The only reason they didn't show it was due to a glitch in the prototype.

Ernie


Can you tell us anything new?


Celebrating 18 years on the CTT Forum. Smile, Wink & Grin

Buckeye Riveter......... OTTS Charter Member, a Roseyville Raider and a member of the CTT Forum since 2004..

Jelloway Creek, OH - ELV 1,100 - Home of the Baltimore, Ohio & Wabash RR

TCA 09-64284

  • Member since
    April 2002
  • 20 posts
Posted by lionel2341 on Sunday, September 25, 2005 7:45 AM
No problem I'll stop posting new product info.

Ernie
  • Member since
    April 2002
  • 20 posts
Posted by lionel2341 on Sunday, September 25, 2005 7:46 AM
PS I read the forum everyday!!
  • Member since
    March 2004
  • From: Jelloway Creek, OH - Elv. 1100
  • 7,578 posts
Posted by Buckeye Riveter on Sunday, September 25, 2005 8:12 AM
QUOTE: Originally posted by lionel2341

No problem I'll stop posting new product info.

Ernie

So now I am wrong again. [:(] Are you saying your products are not great and you don't want to tell us here at CTT fourm about them? I really like the products I have purchased and have told several people about my success with TAS products but if you don't want to tell the good folks here at CTT, I guess I better shut up.

Celebrating 18 years on the CTT Forum. Smile, Wink & Grin

Buckeye Riveter......... OTTS Charter Member, a Roseyville Raider and a member of the CTT Forum since 2004..

Jelloway Creek, OH - ELV 1,100 - Home of the Baltimore, Ohio & Wabash RR

TCA 09-64284

  • Member since
    April 2003
  • From: Willoughby, Ohio
  • 5,231 posts
Posted by spankybird on Sunday, September 25, 2005 8:46 AM
QUOTE: Originally posted by lionel2341

PS I read the forum everyday!!


It's nice to know that you visit every day. [:D] It might be better if you said HI more often. [;)] Or add to some of the posting. [:p]

I am a person with a very active inner child. This is why my wife loves me so. Willoughby, Ohio - the home of the CP & E RR. OTTS Founder www.spankybird.shutterfly.com 

  • Member since
    December 2003
  • From: St Paul, MN
  • 6,218 posts
Posted by Big_Boy_4005 on Sunday, September 25, 2005 11:14 AM
Ernie, I'm very interested in seeing this software, or at least hearing about it. I have a very large layout that I WILL be using a computer to control, and want to find out if your software is powerfull enough to do the job. I have been waiting a long time for your product's release. However, I cannot attend York.

I understand that there are modules to this system. The ones that interest me the most are the base and control. I already have bit style input and output hardware in place ready to be hooked up, but need to know if your software can drive it. If not, I may have to write my own software, a task which I dread, but am willing to do in order to get what I want.
  • Member since
    September 2004
  • 306 posts
Posted by CB&Q on Sunday, September 25, 2005 12:59 PM
[:)] Hello Ernie its good to see LCS is finally a reality but do we have to wait for york to purchase it mike told me a year ago I would be notified via e-mail as soon as it was ready so I could order it now sounds like I HAVE TO WAIT UNTIL AFTER YORK TO GET MY OWN COPY. why do we always have to wait on York for certian products to be available to the general public? hope to get an answer soon I've held up my layout for two years now waiting on this system my patience is wavering to run trains.


  • Member since
    April 2002
  • 20 posts
Posted by lionel2341 on Sunday, September 25, 2005 2:00 PM
The web site will be updated in the next couple of days for you to order.

Ernie

PS Guys, I have alot going on in my life outside of Trains, so I have not posted much on any forum.
  • Member since
    February 2001
  • From: US
  • 338 posts
Posted by waltrapp on Sunday, September 25, 2005 7:25 PM
Guys, cool it! Ernie has been noticably absent on OGR's forum too. He used to post rather regularly but not recently (the last year?). In fact, I found myself wondering if something negative happened between TAS/Ernie and OGR since I hadn't seen a post from Ernie in such a long time.

Have you guys that might have a negative impression about him actually met Ernie??? His enthusiasm for the hobby is admirable.

- walt
  • Member since
    March 2004
  • From: Jelloway Creek, OH - Elv. 1100
  • 7,578 posts
Posted by Buckeye Riveter on Sunday, September 25, 2005 9:21 PM
QUOTE: Originally posted by waltrapp


Have you guys actually met Ernie??? - walt

And the answer is: YES

Met Phil, too.

Celebrating 18 years on the CTT Forum. Smile, Wink & Grin

Buckeye Riveter......... OTTS Charter Member, a Roseyville Raider and a member of the CTT Forum since 2004..

Jelloway Creek, OH - ELV 1,100 - Home of the Baltimore, Ohio & Wabash RR

TCA 09-64284

Join our Community!

Our community is FREE to join. To participate you must either login or register for an account.

Search the Community

FREE EMAIL NEWSLETTER

Get the Classic Toy Trains newsletter delivered to your inbox twice a month