Trains.com

Question & Answer of the Week - September 16, 2005

939 views
7 replies
1 rating 2 rating 3 rating 4 rating 5 rating
  • Member since
    January 2005
  • From: New England
  • 6,241 posts
Question & Answer of the Week - September 16, 2005
Posted by Jumijo on Monday, September 19, 2005 6:49 AM
From the pages of CLASSIC TOY TRAINS magazine, Ray L. Plummer and the CTT staff offer a Question & Answer of the week.

This Week: Making insulated track

http://www.trains.com/Content/Dynamic/Articles/000/000/006/168mwfyn.asp

Modeling the Baltimore waterfront in HO scale

  • Member since
    July 2003
  • From: Crystal Lake, IL
  • 8,059 posts
Posted by cnw1995 on Monday, September 19, 2005 8:24 AM
Somehow after working last winter on creating my own section of insulated track - pretty much according to these instructions, it didn't work . I used duct tape instead of the suggested cardboard and it may not be 'insulating' enough.

Doug Murphy 'We few, we happy few, we band of brothers...' Henry V.

  • Member since
    January 2005
  • From: New England
  • 6,241 posts
Posted by Jumijo on Monday, September 19, 2005 8:35 AM
Perhaps a layer or two of electrical tape would have worked better?

Jim

Modeling the Baltimore waterfront in HO scale

  • Member since
    December 2001
  • From: Austin, TX
  • 10,096 posts
Posted by lionelsoni on Monday, September 19, 2005 8:36 AM
You need something stouter than duct tape. I use the black fiberboard from an old report cover (one goes a long way), which seems very similar to the stuff that Lionel uses.

Bob Nelson

  • Member since
    February 2004
  • From: Rolesville, NC
  • 15,416 posts
Posted by ChiefEagles on Monday, September 19, 2005 8:41 AM
I use to use two layers of black vinyl electrical tape. Never had a problem. Is the silver in duct tape aluminum?

 God bless TCA 05-58541   Benefactor Member of the NRA,  Member of the American Legion,   Retired Boss Hog of Roseyville Laugh,   KC&D QualifiedCowboy       

              

  • Member since
    April 2003
  • 305,205 posts
Posted by Anonymous on Monday, September 19, 2005 9:34 AM
I've had good results using a cut up matchbook cover. Never had a problem.
Paul
  • Member since
    July 2003
  • From: North Texas
  • 5,707 posts
Posted by wrmcclellan on Monday, September 19, 2005 10:02 AM
Lionel uses an age-old insulating product called "Fish Paper" that is .020" thick. Fish paper is an insulating paper used in motors, switch boxes, lamps, etc., that is made from pressed rag fiber (inexpensive version) or vulcanized fibers (more durable expensive version). This stuff has the ability to be easily die cut and folded.

Something else that works well is the plastic covers from the old 7" floppy disks (the original floppy). How many of these do some of us have lying around? I have lots!

There are serious sharp edges and burrs on the Lionel tubular track and ties. I have had brand new track fail (short circuit) due to a burr pushing through the fish paper. This caused me to rip up the center rail on 4 feet of track just weeks after the ballasting was completed looking for the short. Luckily I have electrical blocks on my layout so I only had to worry about 8 feet of rail vs 30.

Regards,
Roy

Regards, Roy

  • Member since
    August 2013
  • 39 posts
Posted by bomber on Monday, September 19, 2005 10:50 AM
Visit an electrical supply house, one that electrician contractors use, and purchase a sheet of insulating paper. It is semi-ridgid, water resistant and has excellent electrical insulating properties. the Information Technology and Telephone Companies use it. It works.

bomber

Join our Community!

Our community is FREE to join. To participate you must either login or register for an account.

Search the Community

FREE EMAIL NEWSLETTER

Get the Classic Toy Trains newsletter delivered to your inbox twice a month