Trains.com

Inclined / tilted / sloped track with wedge shaped ties

1275 views
9 replies
1 rating 2 rating 3 rating 4 rating 5 rating
  • Member since
    April 2003
  • 305,205 posts
Posted by Anonymous on Sunday, July 24, 2005 4:49 PM
Bill from Ft. Wayne,

That is exactly the stuff I am looking for.

1) Can you identify what is there ?
2) Do you have some extra that you would be willing to sell ?

Thanks,
Jeff

  • Member since
    April 2003
  • 305,205 posts
Posted by Anonymous on Saturday, July 23, 2005 8:07 PM
Until this thread I wasn't aware of modern manufacturers attempts at banked curve O gauge tubular track. Ives produced it's own version way back in the early 1900's. I have enough of this type track for a complete circle (roughly 27" dia.) including one curve that has provisions for electrical connections ( permanent type lockon). The third rail is, as the surfers say, totally tubular....a simple hollow tube held in place with what's best described as C clips. These in turn are mounted to the ties like a rivet using metal and insulated washers. The ties themselves aren't stepped like in the above picture although the angle created is about identical. I know this isn't an answer to your search for wide radius, banked track. I just found the topic worth commenting on.

Bruce Webster
  • Member since
    April 2003
  • 305,205 posts
Posted by Anonymous on Saturday, July 23, 2005 1:36 PM
All American Flyer O gauge and Hafner trains do use track like this. Don't forget about Eruopean manufacturers, though. All the trains made by companies like Bing, Marklin, Bub, etc. used this kind of track. Hornby of England is an exception, though, but pretty much all the German companies made this kind of track. In fact, AF and Hafner were certainly copying European practice in making their track. It can be hard to come by. Good luck in finding some.
  • Member since
    April 2003
  • 305,205 posts
Posted by Anonymous on Friday, July 22, 2005 6:40 PM
Looking for track like this?



BillFromWayne
www.modeltrainjournal.com
  • Member since
    May 2003
  • From: Morgantown, WV
  • 1,459 posts
Posted by cheese3 on Friday, July 22, 2005 1:19 PM
Or you could try making shims out of popcicle sticks. Seems easy enough and not too expensive either

Adam Thompson Model Railroading is fun!

  • Member since
    December 2003
  • From: St Paul, MN
  • 6,218 posts
Posted by Big_Boy_4005 on Friday, July 22, 2005 12:51 PM
QUOTE: Originally posted by bjaspud

Maybe I should have called it 'superelevated' or 'banked' tubluar track that I am looking for.

Rumor is that both Flyer and Hafner used to make it.


I understood exactly what you meant, and I think you are right about who used to make it. But I still think it would be easiest to make your own by bending the ties of normal track with a pair of pliers.
  • Member since
    July 2003
  • From: Watkinsville, GA
  • 2,214 posts
Posted by Roger Bielen on Friday, July 22, 2005 12:23 PM
Try running a length of 12GA wire under the ties at the outside of the curve as a shim.
Roger B.
  • Member since
    April 2003
  • 305,205 posts
Posted by Anonymous on Friday, July 22, 2005 12:02 PM
Maybe I should have called it 'superelevated' or 'banked' tubluar track that I am looking for.

Rumor is that both Flyer and Hafner used to make it.
  • Member since
    December 2003
  • From: St Paul, MN
  • 6,218 posts
Posted by Big_Boy_4005 on Friday, July 22, 2005 11:30 AM
I've seen the old stuff, but unless you have a shop near you that deals in used, you are going to be hard pressed to find it. Even then it's hit and miss.

You could easily make your own with new or used track and a pair of pliers. On the outside of the curve, pinch the bottom edges of the tie together, and on the inside of the curve bend the bottoms out. Thats basicly what the manufacturers did originally.
  • Member since
    April 2003
  • 305,205 posts
Inclined / tilted / sloped track with wedge shaped ties
Posted by Anonymous on Friday, July 22, 2005 10:46 AM
I am looking for some large radius inclined / tilted / sloped track to use for my wind up Marx and Hafner engines.

I saw a few used pieces at a local shop but could not identify the maker.

Did Flyer make a sloped O gauge track ? Hafner ? Marx ?

Most importantly does anyone know where I can get some ?

Thanks,
Jeff

Join our Community!

Our community is FREE to join. To participate you must either login or register for an account.

Search the Community

FREE EMAIL NEWSLETTER

Get the Classic Toy Trains newsletter delivered to your inbox twice a month