Trains.com

Making snow

1210 views
9 replies
1 rating 2 rating 3 rating 4 rating 5 rating
  • Member since
    August 2003
  • From: Columbus, Ohio
  • 426 posts
Making snow
Posted by nitroboy on Friday, April 15, 2005 9:17 PM
I need some ideas for making snow for my Christams layout. I would like it to be more life-like than batting or things like that. No luck with the dying sawdust, too muddy looking. My wife suggested salt, but I think it would clump when glue is applied. Any ideas are welcome.
Dave Check out my web page www.dmmrailroad.com TCA # 03-55763 & OTTS Member Donate to the Mid-Ohio Marine Foundation at www.momf.org Factory Trained Lionel Service Technician
  • Member since
    April 2003
  • From: Willoughby, Ohio
  • 5,231 posts
Posted by spankybird on Saturday, April 16, 2005 6:55 AM
HI Dave,

Woodland Secnes makes a Snow Powder. I first paint the ground with white paint and then while the paint is still wet, add the Snow Powder.

tom

I am a person with a very active inner child. This is why my wife loves me so. Willoughby, Ohio - the home of the CP & E RR. OTTS Founder www.spankybird.shutterfly.com 

  • Member since
    April 2003
  • 305,205 posts
Posted by Anonymous on Saturday, April 16, 2005 6:56 AM
Check out Woodland Scenics. They make snow in a plastic shaker container. Product no. SN140.
  • Member since
    January 2004
  • From: morris il.
  • 102 posts
Posted by cmrj on Saturday, April 16, 2005 9:26 AM
Dave along with the powered snow add some snow glitter it's a craft product. Christmas layout's need a little sparkle to add to the magic of the season.
  • Member since
    April 2003
  • 305,205 posts
Posted by Anonymous on Saturday, April 16, 2005 10:26 AM
well just get some snow when it is snowing
  • Member since
    August 2003
  • 6,434 posts
Posted by FJ and G on Saturday, April 16, 2005 7:34 PM
my snow scene is made out of a unique material that as far as I know, no one has ever before used, simply because it is not the "traditional" way to do it

joint compound is what I use, esp. for distant scenes where the individual snowflakes would not be detected, or the texture.

If you mix some black in the joint compound, you can even model some dirty city snow. I've NEVER seen this done before; but it's prototype.

Here's snow on distant peak on my layout using joint compound






But, I understand that marble dust is tops!

cmrj;

snow glitter can be obtained in tubes from Michaels; it's really VERY impressive when sprinkled on whatever snow material you're making
  • Member since
    July 2003
  • From: Watkinsville, GA
  • 2,214 posts
Posted by Roger Bielen on Saturday, April 16, 2005 8:28 PM
Try looking in the Scenic Express catalogue, they seem to have about everything. If all else fails ask the Yankee contingent, they always seem to have more than enough.
Roger B.
  • Member since
    February 2005
  • 1,821 posts
Posted by underworld on Tuesday, April 19, 2005 2:15 PM
Water vapor from an ultrasonic vaporizer and a really cold room! Or, what we do at work for fun sometimes is we take a CO2 tank that we have for cleaning the coils on a refrigeration unit.....turn it upside down and let out a blast. It freezes moisture in it's path and it looks like it's snowing.....doesn't last long though! [:p] Actually Woodland Scenics does make some nice snow. [:)]

underworld

[:D][:D][:D][:D][:D]
currently on Tour with Sleeper Cell myspace.com/sleepercellrock Sleeper Cell is @ Checkers in Bowling Green Ohio 12/31/2009 come on out to the party!!! we will be shooting more video for MTVs The Making of a Metal Band
  • Member since
    April 2003
  • 305,205 posts
Posted by Anonymous on Tuesday, April 19, 2005 11:06 PM
A customer I was building a layout for wanted a snowy montain area that was about 12' by 5' in area. After getting the basic mountain shapes finished with Woodland Scenic plaster cloth, and coloring the areas that were going to be vertical rock faces I covered a large area of the mountain with snow. Regular plaster of paris was built up into a heavy layer of "frosting" that povided a base of snow. A little blue was airbrushed in selected areas to creat shadows. At that point a layer of white glue was spread over the dry plaster of paris with large quatities of baking powder sprinkled into the wet glue. After this dried, a light misting of Woodland Scenics glue was sprayed onto the "snow"
The final effect was to sprinkle liberal amount of irredescent glitter on top of the snow. I found this in a Michael's craft store. It really bring the snow to life. Finally, a ton of snow covered pines were planted. I finished this area about 3 years ago, and it still looks like the "snow" fell last night.
  • Member since
    April 2003
  • 305,205 posts
Posted by Anonymous on Tuesday, April 19, 2005 11:17 PM
Dry white plaster on white glue or paint works great. You can always ask the Chief to send you some[:-,]. Regards Steve

Join our Community!

Our community is FREE to join. To participate you must either login or register for an account.

Search the Community

FREE EMAIL NEWSLETTER

Get the Classic Toy Trains newsletter delivered to your inbox twice a month