Trains.com

Super Glue vs. J.D. Weld for metal to metal

3081 views
4 replies
1 rating 2 rating 3 rating 4 rating 5 rating
  • Member since
    August 2003
  • 6,434 posts
Super Glue vs. J.D. Weld for metal to metal
Posted by FJ and G on Tuesday, March 29, 2005 10:28 AM
I'm in process of replacing all my Williams handrails with my own specially made copper handrails, which are aluminum wire and the stanchions are 14 ga copper wire that I hammered flat.

I tried super glue (same as crazy glue?) to affix the stanchions to the metal lip, but encountered several problems.

1. It is hard to dole out just the right amount of super glue. Too much and it doesn't stick very well.

2. The super glue dries much too quickly when I need to line up all the stanchions simultaneously so I cannot reposition them

I switched to JB Weld (found at auto body stores and HD and Lowes). The stuff is strong enough (so it claims) to fixed cracked engine blocks.

It worked perfectly for security the stanchions in place. The downside is that it takes 15 hours curing time, but that was not a concern with the project. Also, you must hide the JB Weld you emplace as it does not dry clear like super glue.

For other projects, super glue might be adventagous; just not for this one.

if you look closely, you can see where I ripped off the front handrails/stanchions on the Williams GP-9 and replaced. Gonna complete the rest later.

  • Member since
    December 2003
  • From: Austin, TX USA - Central Time Zone
  • 997 posts
Posted by Jim Duda on Tuesday, March 29, 2005 10:33 AM
They make "5 Minute" J.B.Weld...and there is "Slow" cyanoacrylate (Super Glue) that can be activated by "CA Kicker" when the parts are in place. Get the slow CA and Kicker from any Hobby Shop that deals with R/C airplanes...
Small Layouts are cool! Low post counts are even more cool! NO GRITS in my pot!!!
  • Member since
    August 2003
  • 6,434 posts
Posted by FJ and G on Tuesday, March 29, 2005 10:44 AM
thanks, Jim.

learning much here

maybe just add vinager to slow curing time
  • Member since
    February 2005
  • 1,821 posts
Posted by underworld on Tuesday, March 29, 2005 12:29 PM
Dave Jim is right on about the slow CA. JB Weld is great for a lot, but probably more for larger repairs than for adhesive. Years ago I fixed the transmission cooler line on a semi auto VW Beetle. The line (special part, dealer only) was about $50, JB Weld back then (about 18 years ago) was about $2. I applied a layer and while wet wrapped it with fiberglass cloth then another layer of JB Weld after it had cured.

underworld

[:D][:D][:D][:D][:D]
currently on Tour with Sleeper Cell myspace.com/sleepercellrock Sleeper Cell is @ Checkers in Bowling Green Ohio 12/31/2009 come on out to the party!!! we will be shooting more video for MTVs The Making of a Metal Band
  • Member since
    March 2004
  • From: Over the Rainbow!
  • 760 posts
Posted by eZAK on Tuesday, March 29, 2005 3:18 PM
Try epoxy!

It comes in a double syringe.
There are many varities & some even dry crystal clear.
Relax, Don't Worry, Have a Home Brew!</font id="size2"> Pat Zak</font id="size3">

Join our Community!

Our community is FREE to join. To participate you must either login or register for an account.

Search the Community

FREE EMAIL NEWSLETTER

Get the Classic Toy Trains newsletter delivered to your inbox twice a month