Trains.com

6x12 two level layout; now what to cover or paint over all that surface?

2087 views
6 replies
1 rating 2 rating 3 rating 4 rating 5 rating
  • Member since
    November 2015
  • 3,584 posts
Posted by Sturgeon-Phish on Thursday, March 24, 2005 9:01 AM
Thanks. Good tips. I've read and done a lot on the mechanical aspects of our great hobby, (wiring, repair, benchwork) but as I enter into the more "artistic" realm, I'll need more study.
Jim
  • Member since
    February 2005
  • From: Vancouver Island, BC
  • 23,330 posts
Posted by selector on Wednesday, March 23, 2005 3:06 PM
If spread very thinly, two small bags might (might) do it, but I doubt it. I would bite it, buy two of the mid-size or large bags ($18?), and one bag of "bushes" to make it look like a large plain or prairie. Place the bushes individually with tweezers. Dip the one edge in carpenter's glue, and then place randomly around the layout. Don't forget that bushes grow out of the edges of the ballast. Also, that bushes regenerate, so they will appear in clumps, not one here, one over there, etc.
  • Member since
    November 2015
  • 3,584 posts
Posted by Sturgeon-Phish on Tuesday, March 22, 2005 6:33 PM
How much foam would be needed to cover the area?
  • Member since
    February 2005
  • From: Vancouver Island, BC
  • 23,330 posts
Posted by selector on Monday, March 21, 2005 3:41 PM
I would disagree, and suggest a light tan with one or two small bags with different colours of Woodland Scenics ground foam sprinkled lightly over it. The effect will be pleasing and not look unfinished, even though you have used so little material at so litle cost.
  • Member since
    December 2003
  • From: Austin, TX USA - Central Time Zone
  • 997 posts
Posted by Jim Duda on Monday, March 21, 2005 1:45 PM
Dark Brown flat latex paint will not attack your foam. Copy nature for bare earth...you can always "plant" grass, shrubs, trees, etc., later...heck, you might even want to "pour cement" (flat grey latex) in certain areas...
Small Layouts are cool! Low post counts are even more cool! NO GRITS in my pot!!!
  • Member since
    April 2003
  • From: Pittsburgh, PA
  • 1,429 posts
Posted by MartyE on Monday, March 21, 2005 12:13 PM
Definitely cover it in a base of a earth tone paint, then anything you put down will blend with it.. I used some Scenic express ground cover in the form of a fine green for kawns. They make some heavier material that may suit more for the Yard Look you are going for,

Trying to update my avatar since 2020 Laugh

MartyE and Kodi the Husky Dog! ( 3/31/90-9/28/04 ) www.MartyE.com My O Gauge Web Page and Home of Kodiak Junction!

  • Member since
    April 2003
  • 305,205 posts
6x12 two level layout; now what to cover or paint over all that surface?
Posted by Anonymous on Monday, March 21, 2005 12:02 PM
At this stage there are two levels of 0 gauge track on pink styrofoam. The railbed is simulated with a modest amount of ground stone.
I would like to see your replies about relatively easy (time-effective) methods to cover the remaining 72 sq. ft. There will never be buildings, water, or mountains. I thought about an industrial look, black paint, or a uniform layer of sand. I'm certain the forum will offer something better.
Thanks.

Join our Community!

Our community is FREE to join. To participate you must either login or register for an account.

Search the Community

FREE EMAIL NEWSLETTER

Get the Classic Toy Trains newsletter delivered to your inbox twice a month