Trains.com

E - Lek - Tricity, E - Lek - Tricity

1746 views
17 replies
1 rating 2 rating 3 rating 4 rating 5 rating
  • Member since
    July 2020
  • 1,631 posts
E - Lek - Tricity, E - Lek - Tricity
Posted by pennytrains on Tuesday, April 12, 2022 5:17 PM

Regarding a Lionel KW.  When replacing the power cord with a modern lamp cord with polarized plugs, does it matter which core lead the wide blade of the plug is connected to?  I doubt I'll ever have to worry about phasing this pack with another by the way.

Big Smile  Same me, different spelling!  Big Smile

  • Member since
    July 2020
  • 1,631 posts
Posted by pennytrains on Tuesday, April 12, 2022 5:20 PM

PS I've watched several YouTube videos concerning disassembly, servicing and cord replacement, but none of them say anything about polarized plugs.

Big Smile  Same me, different spelling!  Big Smile

  • Member since
    December 2001
  • From: Austin, TX
  • 10,096 posts
Posted by lionelsoni on Tuesday, April 12, 2022 5:53 PM

It's not widely known that zip cord (which I assume you're planning to use) is itself polarized.  It has a little ridge that is easier to feel than to see, cast into the insulation over the "identified" conductor.  That is the conductor that would be grounded and would be white in a cable with distinct black and white wires.  So I would connect that wire to the wide plug blade.

That being said, it won't matter to the functioning of the transformer which wire is which at the transformer end.  Nevertheless, you might help some future repairman not to get confused by wiring the plug the way I described.  (In my experience, that repairman is likely to be me, not remembering how I did something years ago!)

Bob Nelson

  • Member since
    July 2020
  • 1,631 posts
Posted by pennytrains on Tuesday, April 12, 2022 7:27 PM

Generic "Hyper Tough" 8 foot replacement lamp cord I bought at Walmart.  18 gauge, "for use with bulbs not exceeding  300W" is all the packaging says.  The conductor with the flanged prong is ribbed.

Since the KW predates polarized plugs by several years I figured I was OK.  But considering how much effort it's going to take just to get inside the unit I figured I should check first.  And to tell the truth I was hoping you would respond!  Big Smile

Big Smile  Same me, different spelling!  Big Smile

  • Member since
    January 2019
  • From: Henrico, VA
  • 9,728 posts
Posted by Flintlock76 on Tuesday, April 12, 2022 8:37 PM

Getting inside a KW's not as hard as you might think.  First, get a firm grip on the control handles one at a time and lift straight up to remove them.  Then remove the screws on the top of the KW to lift off the cover. 

Years back I had to replace the cord on a KW, I used a good-quality extension cord to do so.  It ain't blown up yet.  

Just so everyone knows, I've never wired it (phased it?) in series with another KW and have no intention to.  

  • Member since
    July 2020
  • 1,631 posts
Posted by pennytrains on Wednesday, April 13, 2022 8:32 AM

Thanks guys!  Big Smile  It was getting to the point where my cord could turn 90 degrees away from center at the top of the plug!  Tongue Tied  Time for a replacement!

Here's the video I found:  https://youtu.be/FXeRDRTI2w0

It goes further than I suspect I need but it could be very useful in the future.

Big Smile  Same me, different spelling!  Big Smile

  • Member since
    December 2001
  • From: Austin, TX
  • 10,096 posts
Posted by lionelsoni on Wednesday, April 13, 2022 1:05 PM

There's a lot of garbled electrical jargon in that video.  I watched it up to the point where he reports that his diagnosis of the power cord involves not getting any reading on current with the voltimeter.  He should have left well enough alone when he observed that the cord was gummy.

Bob Nelson

  • Member since
    July 2020
  • 1,631 posts
Posted by pennytrains on Wednesday, April 13, 2022 6:11 PM

Yeah.  I can see copper and that's all I needed to know.  I watched mainly for the disassembly demo.

Big Smile  Same me, different spelling!  Big Smile

  • Member since
    December 2005
  • From: Hopewell, NY
  • 3,233 posts
Posted by ADCX Rob on Thursday, April 14, 2022 8:33 AM

pennytrains
Here's the video I found:  https://youtu.be/FXeRDRTI2w0

lionelsoni
There's a lot of garbled electrical jargon in that video



That video is a hot mess.

Rob

  • Member since
    February 2014
  • 520 posts
Posted by Leverettrailfan on Thursday, April 14, 2022 10:00 AM

I wasn't going to bother watching it but curiosity struck. It is useful to see how it comes apart, but that's about it. 

Becky, the title of the original post amuses me greatly. Me and my siblings watched those Schoolhouse Rock music videos quite a bit, my parents had fond memories of them and got a DVD for us. A certain mentioned video was always a favorite Big Smile

-Ellie

"Unless bought from a known and trusted dealer who can vouch otherwise, assume every train for sale requires servicing before use"

  • Member since
    December 2005
  • From: Hopewell, NY
  • 3,233 posts
Posted by ADCX Rob on Thursday, April 14, 2022 10:43 AM

pennytrains
E - Lek - Tricity, E - Lek - Tricity

https://youtu.be/7yRGvMgieEU?t=41

 

Rob

  • Member since
    January 2019
  • From: Henrico, VA
  • 9,728 posts
Posted by Flintlock76 on Thursday, April 14, 2022 2:09 PM

Becky, I sent some scans of a KW manual to you.  If you see an inbound message from "jerseynuke" that's me.

Wayne

  • Member since
    July 2020
  • 1,631 posts
Posted by pennytrains on Thursday, April 14, 2022 6:14 PM

Ellie, I knew somebody would get it!  And if we're going down that tangent...

https://m.youtube.com/watch?v=4AyjKgz9tKg

 

Big Smile  Same me, different spelling!  Big Smile

  • Member since
    December 2001
  • From: Austin, TX
  • 10,096 posts
Posted by lionelsoni on Saturday, April 16, 2022 5:15 PM

Fun fact:  The word "E-Lek-Tricity" comes from the Greek word "elektron", which means "amber".

Another fun fact:  Since May 20, 2019, the electrical charge of an electron is exactly -.0000000000000000001602176634 coulomb.

Bob Nelson

  • Member since
    July 2020
  • 1,631 posts
Posted by pennytrains on Saturday, April 16, 2022 7:27 PM

Big Smile  Same me, different spelling!  Big Smile

  • Member since
    July 2020
  • 1,631 posts
Posted by pennytrains on Saturday, April 16, 2022 7:33 PM

And the live in Copenhagen version:

https://m.youtube.com/watch?v=nz_-KNNl-no

 

Big Smile  Same me, different spelling!  Big Smile

  • Member since
    July 2020
  • 1,631 posts
Posted by pennytrains on Saturday, April 16, 2022 7:38 PM

Big Smile  Same me, different spelling!  Big Smile

  • Member since
    July 2020
  • 1,631 posts
Posted by pennytrains on Monday, April 18, 2022 2:20 PM

Success!  Big Smile

https://link.shutterfly.com/EHNfQsjOkpb

Here's the old cord that I was worried about:

 https://link.shutterfly.com/e7nygzuOkpb

Thanks for all your help!

Big Smile  Same me, different spelling!  Big Smile

Join our Community!

Our community is FREE to join. To participate you must either login or register for an account.

Search the Community

FREE EMAIL NEWSLETTER

Get the Classic Toy Trains newsletter delivered to your inbox twice a month