Trains.com

Lionel KW Transformer

1534 views
3 replies
1 rating 2 rating 3 rating 4 rating 5 rating
  • Member since
    December 2001
  • 13 posts
Lionel KW Transformer
Posted by jnsap2 on Tuesday, January 11, 2005 5:49 PM
My Lionel KW Transformer will not operate my Lionel Southern Pacific SD-40 in conventional mode. Why? I get the Railsounds when I turn on but no motion. It does fine in TMCC mode . Any ideas are welcomed
  • Member since
    September 2002
  • 548 posts
Posted by Chris F on Tuesday, January 11, 2005 9:01 PM
Sounds like the loco still wants to run in command mode. Did you unplug the command base from the power outlet? Disconnecting it from the common terminal sometimes isn't enough.
  • Member since
    December 2001
  • 13 posts
Posted by jnsap2 on Wednesday, January 12, 2005 7:01 PM
Hi thanks for the reply. My layout is 6 X 14 feet with two levels. The upper level is primarily passenger service. One side of the KW is used for that. Occasionally I'll use a TMCC equipped LOCO on the lower level to haul freight. Perhaps the KW is not able to handle that or mine is just too old.
  • Member since
    December 2001
  • 13 posts
Posted by jnsap2 on Thursday, January 13, 2005 9:14 PM
Exciting News! You know I did unplug the command base from the outlet. Guess what? It works!! What a sight to behold! That weathered Southern Pacific SD-40 "Warhorse" leading a long line of heavy freight. Those Pullmors chattering over that smooth MAGNE-TRACTION with the Rail Sounds under load. Beautiful! But boy! she sure does pull a lot of AMPs...she has to share the system with something light, otherwise everything running is pulled down. Thanks." Railroading is Fun"

Join our Community!

Our community is FREE to join. To participate you must either login or register for an account.

Search the Community

FREE EMAIL NEWSLETTER

Get the Classic Toy Trains newsletter delivered to your inbox twice a month