Trains.com

Help! Lionel postwar coupler height

1005 views
3 replies
1 rating 2 rating 3 rating 4 rating 5 rating
  • Member since
    June 2004
  • From: Southeast Florida
  • 134 posts
Help! Lionel postwar coupler height
Posted by Back2Trains on Saturday, December 18, 2004 10:11 AM
I'm about to start an ongoing project of fine-tuning all of my postwar engines and rolling stock. I have everything I need except I don't know the distance between the top of the center rail and the bottom of the coupler knuckle, based on vintage Lionel O gauge tubular track. Does anyone know if Lionel ever specified this anywhere and, if so, what it should be?
Thanks,
Jim

"Keep 'em rolling"
  • Member since
    July 2003
  • From: North Texas
  • 5,707 posts
Posted by wrmcclellan on Saturday, December 18, 2004 12:38 PM
Jim,

I doubt if Lionel had a standard. I would measure some representative pieces from your collection and use that as a standard for the rest of your stock.

Regards,
Roy

Regards, Roy

  • Member since
    December 2001
  • From: Austin, TX
  • 10,096 posts
Posted by lionelsoni on Saturday, December 18, 2004 1:21 PM
Assuming that all the railheads are at the same height, which they should be, it doesn't matter what kind of track you are using. I have never seen a number for coupler height either.

Bob Nelson

  • Member since
    June 2004
  • From: Southeast Florida
  • 134 posts
Posted by Back2Trains on Sunday, December 19, 2004 10:10 AM
Thanks for the response. It's pretty much what I expected, but if there was a specific height I wanted to know before I started the project.
Jim

Join our Community!

Our community is FREE to join. To participate you must either login or register for an account.

Search the Community

FREE EMAIL NEWSLETTER

Get the Classic Toy Trains newsletter delivered to your inbox twice a month