Trains.com

Table Skirts

11298 views
21 replies
1 rating 2 rating 3 rating 4 rating 5 rating
  • Member since
    January 2013
  • 60 posts
Table Skirts
Posted by M1Tanker on Monday, December 13, 2004 11:35 AM
My wife and I want to put a fabric skirt around the 8 X 8 layout we continue to work on. Does anyone have any suggestions on how to do this or has done the same?

thanks,

Robert Smith
  • Member since
    July 2003
  • From: Crystal Lake, IL
  • 8,059 posts
Posted by cnw1995 on Monday, December 13, 2004 11:41 AM
Robert, this is an excellent idea that improves the look of your layout. I'm currently exploring it as well.... I recommend measuring the amount of space you have to cover and then going to some fabric stores. They'll cut it for you. Darker colors - even black - further draws attention to the top of your layout. As far as attaching it goes, it depends on your fascia and sewing ability. ;) I've seen everything from just stapling the cloth to the wood frame to attaching grommets and hanging it like a curain on hooks. It depends on how you wi***o access the space. Good luck. Let us know how you resolve this. I've been stymied because the material I've been looking for is pretty expensive.

Doug Murphy 'We few, we happy few, we band of brothers...' Henry V.

  • Member since
    April 2003
  • 305,205 posts
Posted by Anonymous on Monday, December 13, 2004 12:05 PM
This is how coventions etc. drape or skirt their tables: Their skirt is approximately 2 feet longer than the perimeter of the table (so if it's a 4X8 at 24' perimeter add 2' for a total of 26'). Attach a 2 foot long by 1 inch wide strip of opposing heavy-duty velcro along the top of the fabric at each end (Obviously you make your pleats and do your hemming first before cutting to the 26' lenght). To install one person holds one end against the top band of your table while the other wraps it around, pulls it very tight and then overlaps the 2' section with the Velco. The convention and hotel get these skirts ready-made in variuous sizes and colors from various supply houses. These suppliers also sell various sizes of plastic clips which you use on the top to keep it even tighter.. These clips are usually 3/4" thick because that's the standard thickness of most hotel tables. If you've banded your table the clips won't work and in that case I'd simply glue 3" strips of Velco to the table edge every couple of feet (and on both sides of each of the 4 corners. Then sew opposing Velcro at the corresponding points on the skirt (measure carefully but with a 3" length piece it's going to be a very forgiving system.Simple skirts like this stand up really well to lots of serious use with people sliding in and out of tables etc. Obviously if you're not wrapping the entire table they can be modified to any lenght. If you're not handy or haven't got oodles of free time I would check out what's available in the conevntion supply tarde in your area. I used to have buy stiff like this and it was suprisingly inexpensive and well made.
  • Member since
    March 2004
  • From: Jelloway Creek, OH - Elv. 1100
  • 7,578 posts
Posted by Buckeye Riveter on Monday, December 13, 2004 5:22 PM
Very easy and very cheap.
The photo below was taken to show the new table I am building for an addtion to the layout, but it shows the skirt on the existing layout on the left very clearly when you click on the photo.


The skirt is black plastic. I bought two skirt packages for the length of my table. I purchased both skirts for less than $10 from a store carrying party supplies (The store here in Ohio is called Paper Party Outlet). The skirt comes with tape to attach, but I used two-sided tape by 3M to make it more permanent. The two-sided tape doesn't let go after a year or two of attachment.

When I want to work under the layout, the skirt just folds over the top and we use a clothespin to keep it out of the way.

I looked into the Velcro method and found that I could put a plastic skirt on the layout about 4 or 5 times for the same price. There is a variety of colors.

Here is a website that shows you more what I mean: http://partyoptions.net/solid_color/plastic_table_skirts.htm

Celebrating 18 years on the CTT Forum. Smile, Wink & Grin

Buckeye Riveter......... OTTS Charter Member, a Roseyville Raider and a member of the CTT Forum since 2004..

Jelloway Creek, OH - ELV 1,100 - Home of the Baltimore, Ohio & Wabash RR

TCA 09-64284

  • Member since
    May 2004
  • From: Kaukauna WI
  • 2,115 posts
Posted by 3railguy on Monday, December 13, 2004 6:18 PM
Check out all these fabric panels and border fabrics featuring Lionel trains on ebay:
http://search.ebay.com/lionel-fabric_W0QQsokeywordredirectZ1QQsonewuserZ1QQsosortpropertyZ1
John Long Give me Magnetraction or give me Death.
  • Member since
    April 2003
  • 305,205 posts
Posted by Anonymous on Tuesday, December 14, 2004 7:14 AM
i have a 25 by 15 layout-my wife bought green colored material at johanns-we measured the height of the floor to the table and she cut the material leaving enough to overlap the next adjouning piece so that you could not view under the layout-i then stapled the material to the table's outside edge and then placed a finished moulding over the edge to hide the staples-it looks very nice.
  • Member since
    July 2003
  • From: Crystal Lake, IL
  • 8,059 posts
Posted by cnw1995 on Tuesday, December 14, 2004 8:29 AM
These plastic skirts are a great idea - very affordable - I'm stunned at how much fabric costs.

Doug Murphy 'We few, we happy few, we band of brothers...' Henry V.

  • Member since
    April 2003
  • From: Pittsburgh, PA
  • 1,429 posts
Posted by MartyE on Tuesday, December 14, 2004 11:05 AM
A very cheap alternative for a holiday layout is the plastic table clothes. Cut 'em in half and then adjust them to the needed height. Thumb tack 'em to the table top.

Trying to update my avatar since 2020 Laugh

MartyE and Kodi the Husky Dog! ( 3/31/90-9/28/04 ) www.MartyE.com My O Gauge Web Page and Home of Kodiak Junction!

  • Member since
    March 2004
  • From: Jelloway Creek, OH - Elv. 1100
  • 7,578 posts
Posted by Buckeye Riveter on Tuesday, December 14, 2004 5:01 PM
QUOTE: Originally posted by cnw1995

These plastic skirts are a great idea - very affordable - I'm stunned at how much fabric costs.

Doug, the thing that got me when I looked at the fabric was not only expesive, but the decoration, artwork, or pattern was always going the wrong way. I assume there is a technical term for this, but I don't have a clue. [:D]



Celebrating 18 years on the CTT Forum. Smile, Wink & Grin

Buckeye Riveter......... OTTS Charter Member, a Roseyville Raider and a member of the CTT Forum since 2004..

Jelloway Creek, OH - ELV 1,100 - Home of the Baltimore, Ohio & Wabash RR

TCA 09-64284

  • Member since
    April 2003
  • 305,205 posts
Posted by Anonymous on Tuesday, December 14, 2004 8:14 PM
A good choice for table skirt fabric would be "train theme" material. There are a few vendors who offer "Lionel Fabric" on eBay. Some millinary stores in the larger cities stock mill ends of other train theme fabric. Check them out.
BillFromWayne
www.modeltrainjournal.com
  • Member since
    July 2003
  • From: Crystal Lake, IL
  • 8,059 posts
Posted by cnw1995 on Tuesday, December 14, 2004 9:05 PM
Man, they even have rolls of that plastic stuff for only $15... Hmmm, 100 ft by 40 inches - I need 42 or so inches for 'height' (3 1/2 ft) and the layout is a little over 10 ft. deep and 28 ft long - 48 ft. Maybe I can fudge it a bit - how would I hang this from the joists from the floor above.

Doug Murphy 'We few, we happy few, we band of brothers...' Henry V.

  • Member since
    January 2013
  • 60 posts
Posted by M1Tanker on Thursday, December 16, 2004 11:09 AM
Some great ideads and ones that confirmed what we were already thinking.

Good week for me - made the promotion list for LTC....now what engine should I want to celebrate!

Our layout is called the "Promise Layout"...based on my returning safely from Iraq last year....
  • Member since
    March 2004
  • From: Jelloway Creek, OH - Elv. 1100
  • 7,578 posts
Posted by Buckeye Riveter on Thursday, December 16, 2004 11:29 AM
QUOTE: Originally posted by M1Tanker

Some great ideads and ones that confirmed what we were already thinking.

Good week for me - made the promotion list for LTC....now what engine should I want to celebrate!

Our layout is called the "Promise Layout"...based on my returning safely from Iraq last year....


Thank you for your service to our country and [#welcome] to the CTT forum.

Celebrating 18 years on the CTT Forum. Smile, Wink & Grin

Buckeye Riveter......... OTTS Charter Member, a Roseyville Raider and a member of the CTT Forum since 2004..

Jelloway Creek, OH - ELV 1,100 - Home of the Baltimore, Ohio & Wabash RR

TCA 09-64284

  • Member since
    March 2005
  • From: Southwest Georgia
  • 5,028 posts
Posted by dwiemer on Wednesday, November 23, 2005 8:01 AM
M1 Tanker,
First, thanks for your service. Secondly, I know that you are glad to be home to celebrate Thanksgiving- so much better with the family. Now to your question. May I suggest you go to ie: WalMart and get short length Black Pleated Curtains. You can do the velcro idea with these. For me, the cheap kitchen curtains with pleats already in them look good and no hassle of trying to dress up cut fabric. Also, since they are pre-cut to different lengths, you will have easy access in the splits between curtains for storage and to get to that short circuit that will show its ugly head. In either case, please post your results of whatever route you take.
Dennis

TCA#09-63805

 

Charter BTTs.jpg

  • Member since
    August 2003
  • 6,434 posts
Posted by FJ and G on Wednesday, November 23, 2005 8:42 AM
M1 Tanker,

Ditto on your safe return.

Not too many skirts visit my train table.
  • Member since
    March 2004
  • From: Hunt Valley, Maryland
  • 194 posts
Posted by Craignor on Wednesday, November 23, 2005 11:31 AM
Guys,

My wife's Aunt is an amateur seamstress.

We had them over for Christmas a few years ago and they loved my layout. I asked about a skirt, and she volunteered to do it for me.

Of course I paid for the materials and something for the effort. The total cost was about $375. Less than an engine.

It really completes the layout, and makes the underneath a great place to store ALL of my empty train boxes.

She did a great job. The skirt is in sections, and attaches with velrow, one side sewn onto the skirt, the other side stapled to the layout sides.

Anyone in my area that would want the same service let me know and I will refer her to you.

Here is a pic:



  • Member since
    December 2003
  • From: St Paul, MN
  • 6,218 posts
Posted by Big_Boy_4005 on Wednesday, November 23, 2005 2:00 PM
This is an old but interesting topic. Since it was started, I made a decision about what to use for my layout, based on what I saw while on a layout tour last spring.

I have always liked the look of black, and landscape fabric is an inexpensive and effective way to deal with a layout the size of mine.
  • Member since
    April 2003
  • 305,205 posts
Posted by Anonymous on Wednesday, November 23, 2005 8:27 PM
QUOTE: Originally posted by Buckeye Riveter

QUOTE: Originally posted by M1Tanker

Some great ideads and ones that confirmed what we were already thinking.

Good week for me - made the promotion list for LTC....now what engine should I want to celebrate!

Our layout is called the "Promise Layout"...based on my returning safely from Iraq last year....


Thank you for your service to our country and [#welcome] to the CTT forum.


[#ditto][#ditto][#welcome][#welcome]
  • Member since
    January 2013
  • 60 posts
Posted by M1Tanker on Friday, November 25, 2005 8:02 AM
Of course my wife then changed our collective minds and said maybe some of the area iwe could do with some pretty beard board or such instead of a skirt once we mounted some skirting..... Being the smart husband I said sure!
  • Member since
    September 2003
  • From: West coast, USA
  • 356 posts
Posted by rlplionel on Friday, November 25, 2005 6:36 PM
You could either do table skirting:



or install under layout shelving to display your collection:



Robert
http://home.surewest.net/rlplionel/Robert.htm
  • Member since
    January 2013
  • 60 posts
Posted by M1Tanker on Sunday, November 27, 2005 5:46 PM
Next time we need to havea better plan. I hastily expanded it using a different table plan in late 2002 prior to deploying to Iraq. I will plan better for all those things like storage and where I want things at.

Smitty
  • Member since
    January 2013
  • 60 posts
Posted by M1Tanker on Sunday, June 25, 2006 10:00 AM
Great pics guys. We finally went with paneling along the sides where you come in -now on the front...still fololing around with what to do there....

Join our Community!

Our community is FREE to join. To participate you must either login or register for an account.

Search the Community

FREE EMAIL NEWSLETTER

Get the Classic Toy Trains newsletter delivered to your inbox twice a month