Thats a great track configuration and use of space. I hope you consider doing a video of some runs once it's completed.
Nothing is more fairly distributed than common sense: no one thinks he needs more of it than he already has.
Looks like you are having FUN and the layout looks like it will bring you many years of pleasure! Thanks for sharing
Jon
So many roads, so little time.
http://youtu.be/4YmtJm9e9J8
Update of my layout .
Congratulations on using foam! I have used foam for over ten years and it works great. You can cut ditches and make small mounds in foam easily then add paint, weeds and grass.
Celebrating 18 years on the CTT Forum.
Buckeye Riveter......... OTTS Charter Member, a Roseyville Raider and a member of the CTT Forum since 2004..
Jelloway Creek, OH - ELV 1,100 - Home of the Baltimore, Ohio & Wabash RR
TCA 09-64284
Ok finished for the most part wiring just waiting for 10 amp resetable breakers going to replace the glass fuses. Here is some pics of the lights.
This weekend I am going to wire all lights and accessories then all wiring will be done for the most part. Then I am going to start building roads. Does any one have any good way to do this?
Been busy with the snow Blower for last few weekends,hope to start my layout addition this weekend will post picture......Yours looks good!!!
so I wired all the switches and Ucs tracks and soldered power to bottom of track and soldered tmcc wire to track. today I ran a conventional engine and a tmcc engine and all switches and Ucs tracks worked fine. Now I need to wire all the accessories and then I can start the fun stuff.
Jeff
you look like you are having fun and have things well under control.
Keep up the good work.
So I am wiring the layout up now and put some structures on to see what I need. So let me know what you think and give me your opinion .
Todays progress added foam board and the bascule bridge now need to screwthe track down and do all electric.
Had my old layout for 5 years in there and not bad with space heat
Hey that was my BIG mistake.......Good idea to due
Checked out your pictures,its looks like a garage....I hope it is heated ...try that once and in cold weather nothing would move..just a heads up!
Hi: I am starting to add on to an existing layout because I am having a problems with Lionel MTA Lirr set & lionel Candy Cane set running on existing tracks. So the new layout I will be using lionel Fast track. There seems to be a problem with these cars on curves and switches... told this to Lionel got nowhere ....So now have to start building a new layout if I want to run these sets...If you want check out my layout on YOU TUBE Trainman747 will keep you posted. Anyone out ther with ideas for subways stations (Elevated) too send me pictures....
Hi Jeff,
It looks GREAT!!!! Looking forward to seeing it progress through its many stages. You might consider a frame or guard rail around the edges to contain any derailments to the tabletop.
Take care, Joe.
http://www.josephrampolla.com
https://www.youtube.com/user/christmasgarden
Here is the final design of my layout. now I have to take the track off and put pink board on. What you all think?
I am getting closer to track laying
Started the frame of the layout long way to go
There is nothing inherently unsafe about the ZW, and the Z-1000 does not provide any level of safety for trains and DCS. The safety issue for electronics comes instead from the use of Transient Voltage Supression to clamp damaging over voltage spikes. The TIU has this protection.
If you are referring to circuit breaker protection, their function is to protect the transformers and wiring, not the trains & equipment.
Rob
Yea I know I use to us it on old layout but looking for safer for my dcs and trains. Maybe if I use 2 mth 1000 one for switches and accessories and 1 for track.what about Lionel's bricks power just for dcs and track power
The Z-1000, rated at 100 watts output, will be enough to power the switches and their bulbs, and one small single motored train set.
There is nothing wrong in using your ZW transformers. Rated at 275 watts input, they put out 180-210 watts continuously.
Ok here are the next things I am looking for help I have 2 lionel zw ps 275 but I want to run my layout off current power. With the size layout I have what can I run at least 10 switches lionel o22 and accessories plus track will a mth 1000 do it or should I look bigger I run dcs so any suggestions will help.
Thanks for sharing that plan and keeping us posted on your efforts! I really like that plan, too! So many possibilities in a manageable space, with nice action!
Good Luck!
Fine choice. Looks like an action packed plan.
Contribute some pics along the way, and tell us what you run into.
Ok this is the start of it here the plan
Will be following your pictures with interest.
Our community is FREE to join. To participate you must either login or register for an account.
Get the Classic Toy Trains newsletter delivered to your inbox twice a month