Trains.com

Fastrack on grade

1400 views
8 replies
1 rating 2 rating 3 rating 4 rating 5 rating
  • Member since
    December 2001
  • From: US
  • 1,475 posts
Posted by overall on Sunday, November 7, 2004 8:22 PM
Thanks to all for taking the time to reply. I really like the Atlas O switches. My trains operate through them reliably better than Lionel 072 and MUCH better than Gargrave.
I will probably stick with it for my layout and use the Fastrack for my Christmas layout and for the small train board that I am going to build for my great nephew who is now in pre-school. If he decides he likes trains, he will be the first family member I have ever brought into the hobby.

Thanks,

George
  • Member since
    May 2004
  • From: Kaukauna WI
  • 2,115 posts
Posted by 3railguy on Saturday, November 6, 2004 11:25 PM
Fastrack is no more rigid than tubular. You can make a transitions with the first piece or first two pieces at a pitch that is half or a third the grade pitch. Eg: If your grade is 3/8"/10" , pitch the first piece 1/8"/10", the second 1/4"/10", the third piece 3/8"/10" which is your grade.
John Long Give me Magnetraction or give me Death.
  • Member since
    December 2003
  • From: St Paul, MN
  • 6,218 posts
Posted by Big_Boy_4005 on Saturday, November 6, 2004 5:26 AM
George, in my opinion, stick to the Atlas for your layout. The Fastrack is fine for the
Christmas tree.
  • Member since
    December 2001
  • From: US
  • 1,475 posts
Posted by overall on Friday, November 5, 2004 6:53 PM
I don't have any at all yet. I am going to buy an oval of it to use under the christmas tree this christmas. This will give me a chance to really test it out and see whether I want to invest in it somemore. I have a large layout built with several different track types. My Atlas 0 seems to perform the best out of all the brands I've tried.

Thanks,

George
  • Member since
    December 2001
  • From: Austin, TX
  • 10,096 posts
Posted by lionelsoni on Friday, November 5, 2004 4:34 PM
It might help to make a few cuts in the skirt along the sides.

Bob Nelson

  • Member since
    July 2003
  • From: North Texas
  • 5,707 posts
Posted by wrmcclellan on Friday, November 5, 2004 3:52 PM
Overall,

I have done it on a display layout where the Fastrak is screwed to plywood subgrade that rises in accordance with earlier posts where the rise is no more than 4% or the trains just will not make the trip.

If there is no support such as a subgrade, then you will have to do as FJ&G suggests to get the intro and exit points to stay in shape. I also like Fastrack. It would be nice if Lionel introduced a non-ballasted version for just this sort of application.

Regards

Regards, Roy

  • Member since
    August 2003
  • 6,434 posts
Posted by FJ and G on Friday, November 5, 2004 1:46 PM
Another idea you can try if you have a bit of spare Fasttrack you don't mind destroying.

Soak a section in hot water and wearing rubber gloves, try bending it. Shouldn't take much bending to get a fairly good grade.

Just a thought.

I've done it before, actually; Realtrax, using a propane torch. The plastic in Realtrax doesn't melt right away; don't know about Fasttrax
  • Member since
    August 2003
  • 6,434 posts
Posted by FJ and G on Friday, November 5, 2004 1:11 PM
George,

IMO Fasttrack is made for flat carpets. If you are planning a table-top layout with grades, I'd use either tubular, Atlas, or Gargraves.

But if you've got a bunch of Fasttrack, I would get the smallest sections available and try putting those together at the bottom and top of the slope so there's more segments to flex.

I don't think fasttrack, or realtrac, for that matter, are made for doing what you propose.
  • Member since
    December 2001
  • From: US
  • 1,475 posts
Fastrack on grade
Posted by overall on Friday, November 5, 2004 10:27 AM
Has anybody tried to use Fastrack on a grade? It seems to me that this track would be too rigid to bend in a vertical curve to make the transition from flat to incline. I like the Fastrack in general. The appearance is great. I just wonder about that part.

Thanks,

George

Join our Community!

Our community is FREE to join. To participate you must either login or register for an account.

Search the Community

FREE EMAIL NEWSLETTER

Get the Classic Toy Trains newsletter delivered to your inbox twice a month