Trains.com

Slippery Traction Tires

1874 views
4 replies
1 rating 2 rating 3 rating 4 rating 5 rating
  • Member since
    March 2004
  • From: Texas
  • 29 posts
Slippery Traction Tires
Posted by wl_keller on Friday, October 29, 2004 6:23 PM
My wife has a New Bright battery operated train that we set up at Christmas time. I took it out today and for some reason it will no longer pull anything other than it's tender because the traction tires slip on the rails.

The track is made of plastic and the wheels are plastic with rubber traction tires. Does anyone know of a way to make the wheels stop slipping?

I started to try some belt dressing that you put on auto fan belts, but I wasn't sure if it would affect the rubber tires and make it worse.

I tried cleaning the tires and track with alcohol, but it still slips. [:(]

Any suggestions would be appreciated!
  • Member since
    February 2004
  • From: Rolesville, NC
  • 15,416 posts
Posted by ChiefEagles on Friday, October 29, 2004 6:36 PM
Rubbing alcohol is a NO NO. The denatured is what you use [like at Ace or other hardware stores. Not familiar with those but might try a very Fine emory cloth and give them a little buffing.

 God bless TCA 05-58541   Benefactor Member of the NRA,  Member of the American Legion,   Retired Boss Hog of Roseyville Laugh,   KC&D QualifiedCowboy       

              

  • Member since
    March 2004
  • From: Jelloway Creek, OH - Elv. 1100
  • 7,578 posts
Posted by Buckeye Riveter on Friday, October 29, 2004 6:40 PM
Try cleaning the traction tires with GOO Gone. Also clean the track with same.

Celebrating 18 years on the CTT Forum. Smile, Wink & Grin

Buckeye Riveter......... OTTS Charter Member, a Roseyville Raider and a member of the CTT Forum since 2004..

Jelloway Creek, OH - ELV 1,100 - Home of the Baltimore, Ohio & Wabash RR

TCA 09-64284

  • Member since
    March 2004
  • From: Texas
  • 29 posts
Posted by wl_keller on Friday, October 29, 2004 8:21 PM
I'll give that a try.

I used rubbing alcohol the first time.

Someone said that was a no no. Does it leave a film or does it destroy the rubber?
  • Member since
    February 2004
  • From: Rolesville, NC
  • 15,416 posts
Posted by ChiefEagles on Friday, October 29, 2004 11:20 PM
not good for the rubber.

 God bless TCA 05-58541   Benefactor Member of the NRA,  Member of the American Legion,   Retired Boss Hog of Roseyville Laugh,   KC&D QualifiedCowboy       

              

Join our Community!

Our community is FREE to join. To participate you must either login or register for an account.

Search the Community

FREE EMAIL NEWSLETTER

Get the Classic Toy Trains newsletter delivered to your inbox twice a month