Trains.com

MTH F3 or Lionel Postwar Celebration Series F3 - SAME PRICE !

10961 views
40 replies
1 rating 2 rating 3 rating 4 rating 5 rating
  • Member since
    May 2004
  • From: Kaukauna WI
  • 2,115 posts
Posted by 3railguy on Wednesday, October 27, 2004 11:12 AM
QUOTE: Originally posted by FEClionel

Aren't the Texas Special ao rare and hard to come by. So wouldn't the price actually not drop making this a good investment?


FEC, what you are saying could very well be true. The PWC Texas specials are not "rare" by any means (except in the eyes of an uniformed seller on ebay). They certainly are hard to come by because they are coveted. It is very possible Lionel may do the Texas Special again in a slightly different scheme with added electronic features. Lionel is known to reissue products that appreciate on the secondary market, driving prices down. Improved or added features have made past "collectibles" less than desireable.
John Long Give me Magnetraction or give me Death.
  • Member since
    December 2003
  • From: Old Florida
  • 355 posts
Posted by FEClionel on Wednesday, October 27, 2004 10:16 AM
Aren't the Texas Special ao rare and hard to come by. So wouldn't the price actually not drop making this a good investment?
  • Member since
    May 2004
  • From: Kaukauna WI
  • 2,115 posts
Posted by 3railguy on Tuesday, October 26, 2004 4:50 PM
The KCS F3's would be my choice if everything works and the finish is perfect. I think they look just as nice as the MTH FEC units. Throw in $100 for a command base and cab 1 and $450 gives you all the operating fun. You can later buy a TPC 300 to run your postwar engines. I would hesitate to pay $645 for the texas specials because new stuff has a way of bottoming out and it's likely you'll find them cheaper down the road. You can buy the origionals in excellent condition for maybe less than that.
John Long Give me Magnetraction or give me Death.
  • Member since
    December 2003
  • From: Old Florida
  • 355 posts
Posted by FEClionel on Tuesday, October 26, 2004 1:38 PM
Ok narrowed it down - help me decide which is a better value and choice for limited running time and maximum enjoyment. I will be running them with a mix of postwar and pwc series rolling stock on a Christmas layout on the floor. I only have 2 engines now that I sold my 2343's. So this is a big choice.

- MTH 30-2310 ABA F3----------------------$459
- Lionel 38100 2245 PWC AB-------------$645
- Used LN Lionel Kansis City Sp. AA----$350
- Lionel Southern ABA PWC----------------$499

I WANT TO PURCHASE TOMORROW - I CAN TRADE MTH"S NO PROBLEM
  • Member since
    May 2004
  • From: Kaukauna WI
  • 2,115 posts
Posted by 3railguy on Monday, October 25, 2004 9:53 PM
QUOTE: Originally posted by FEClionel

Ok since we are on this subject about F3's - why are the 38100 pwc series Texas Special F3's so expensive and hard to come by? Everytime I come across them they are about $800 for an AB set and the passenger set ABBA is close to $2000.


The PWC Texas Specials have 3 things going for them. They are a beautiful scheme and coveted by collectors. On top of that, they are from the earlier PWC series and not as many were made. Because they have twin motors, verses a single motor in the origionals, they are favored by postwar collectors too. You can buy nice origionals for $500.

FDNYBLOWHARD, GIVE IT A REST. I DON'T CARE FOR MTH EITHER. DO WHAT I DO AND DON'T BUY IT.
John Long Give me Magnetraction or give me Death.
  • Member since
    December 2003
  • From: Old Florida
  • 355 posts
Posted by FEClionel on Monday, October 25, 2004 9:28 PM
Ok since we are on this subject about F3's - why are the 38100 pwc series Texas Special F3's so expensive and hard to come by? Everytime I come across them they are about $800 for an AB set and the passenger set ABBA is close to $2000.
  • Member since
    December 2003
  • From: Old Florida
  • 355 posts
Posted by FEClionel on Monday, October 25, 2004 6:47 PM
I think the tension of the upcoming elections has infiltrated a debate between Lionel and MTH.

- I just want to decided what F3 I want to buy to run around my christmas tree!!!
  • Member since
    November 2003
  • From: Sandy Eggo
  • 5,608 posts
Posted by dougdagrump on Monday, October 25, 2004 5:57 PM
Good Grief, bringing up what brand name of trains you like is as bad as trying to discuss politics or religion. Get a life they are only TOYS. [soapbox][|(][:-^]

Remember the Veterans. Past, present and future.

www.sd3r.org

Proud New Member Of The NRA

  • Member since
    February 2004
  • From: Rolesville, NC
  • 15,416 posts
Posted by ChiefEagles on Monday, October 25, 2004 5:40 PM
FDNY, Misunderstood your post.

"OH YES DCS...AFTER 2 YEARS, STILL TRYING TO WORK SOME BUGS OUT...WHAT GARBAGE."

Thought you ment you had DCS for a couple of years.

See you on TV. Third Watch [love that program] Becareful [I was an Asst Chief for 16 years in a big volunteer dept. but moved] and God bless.

 God bless TCA 05-58541   Benefactor Member of the NRA,  Member of the American Legion,   Retired Boss Hog of Roseyville Laugh,   KC&D QualifiedCowboy       

              

  • Member since
    April 2003
  • 305,205 posts
Posted by Anonymous on Monday, October 25, 2004 4:43 PM
WHY WOULD I SEND YOU "MY DCS" WHEN I NEVER BOUGHT ONE, OR ANYTHING ELSE FROM MTH..

THE DAYS ARE JUST BEGINNING
  • Member since
    May 2004
  • From: Kaukauna WI
  • 2,115 posts
Posted by 3railguy on Monday, October 25, 2004 4:39 PM
QUOTE: Question would you run a MTH new scale F3 like the FEC ABA or UP featured in CCT OCt issue with postwar cars?


The MTH units are scaled like postwar Lionel. Other than they are not genuine postwar and the finsh doesn't blend as well, I see no reason why not. You have to promise not to tell anyone.
John Long Give me Magnetraction or give me Death.
  • Member since
    December 2003
  • From: Old Florida
  • 355 posts
Posted by FEClionel on Monday, October 25, 2004 12:39 PM
Question would you run a MTH new scale F3 like the FEC ABA or UP featured in CCT OCt issue with postwar cars?
  • Member since
    May 2004
  • From: Kaukauna WI
  • 2,115 posts
Posted by 3railguy on Monday, October 25, 2004 12:58 AM
Which would you pick?
-Lionel 2343 Excellent Condition $500
-Lionel Kansas City Southern - LN $399
-Lionel Rio Grande postwar celebration series remake - $499
-Lionel Souther pwc remake -$499
-MTH FEC - $459

None of us can tell you the right choice for you. However, these are my favorites:

1) Lionel 2343's because I love postwar

2) Lionel KCS F-3's. Like the FEC units, they have a very nice paint scheme. They come with command control, railsounds, magnetraction, etc. They work well in a postwar enviroment.
John Long Give me Magnetraction or give me Death.
  • Member since
    February 2004
  • From: Rolesville, NC
  • 15,416 posts
Posted by ChiefEagles on Sunday, October 24, 2004 10:34 PM
I'd select the MTH. I will say, I have more Lionel engines [9] than MTH [2] and only 2 Williams and 1 K-Line. When I get the big layout built in the train room, I'm adding TMCC too. I want to run them both with remote. Did not think so when I got back into this last winter [trains stored for 20 years]. The more I studied, the more I was convinced to do DCS and then add the TMCC module. That way, you can run MTH, Lionel and K-Line [with TMCC] and Lionel and Williams conventional too. Good luck with your engines and the best part is, you enjoy what you are doing. God bless.

 God bless TCA 05-58541   Benefactor Member of the NRA,  Member of the American Legion,   Retired Boss Hog of Roseyville Laugh,   KC&D QualifiedCowboy       

              

  • Member since
    December 2001
  • From: Austin, TX
  • 10,096 posts
Posted by lionelsoni on Sunday, October 24, 2004 9:42 PM
I don't care who buys Lionel and who buys MTH. I for one am tired of the bashing and shouting. "Nice guy", please live up to your name.

Bob Nelson

  • Member since
    May 2004
  • From: Kaukauna WI
  • 2,115 posts
Posted by 3railguy on Sunday, October 24, 2004 9:13 PM
FDNY, the Lionel days as we knew them are pretty much gone now. Lionel, MTH, and K-Line is built pretty much alike in China with can motors, rubber band wheels, and futzy electronics. Atlas O is probably my favorite company.

There is no substitute for postwar. Postwar has feel, sounds, smells, and funkyness the new stuff doesn't compare too. Postwar rocks!
John Long Give me Magnetraction or give me Death.
  • Member since
    April 2003
  • 305,205 posts
Posted by Anonymous on Sunday, October 24, 2004 8:36 PM
I AM VERY CALM, WHATS THE MATTER? ITS OK FOR GUYS TO BASH LIONEL, BUT WHEN IT COMES TO BASHING MTH YA CANT TAKE IT..
SOMEDAY, IF I MEET MIKE WOLF, I WILL TELL HIM WHAT I THINK.
  • Member since
    December 2003
  • From: Old Florida
  • 355 posts
Posted by FEClionel on Sunday, October 24, 2004 7:37 PM
ChiefEagles - which engine would you select?
  • Member since
    February 2004
  • From: Rolesville, NC
  • 15,416 posts
Posted by ChiefEagles on Sunday, October 24, 2004 6:14 PM
Hey FEC, I'm running DCS on the floor. Have not gotten my train room cleaned out to build layout. Using a spare bedroom right now.

DCS and conventional all at one time on carpet.
DCS is easy. FDNY, send me your DCS and I'll pay shipping. [;)]

 God bless TCA 05-58541   Benefactor Member of the NRA,  Member of the American Legion,   Retired Boss Hog of Roseyville Laugh,   KC&D QualifiedCowboy       

              

  • Member since
    December 2003
  • From: Old Florida
  • 355 posts
Posted by FEClionel on Sunday, October 24, 2004 4:49 PM
Th real reason I asked was to compare - I like the MTH because it is cheaper than Lionel and has the graphics of my favorite railroad. I like the Lionel because it heavy and is a direct desendent of the postwar stuff. I'm just confused now - I like postwar because its the original and it has history. I like the new stuff because sometimes I think I need to collect "my trains" not someones from the 50's toys. Its hard being a poor recent college grad with little experience with deciding if I want new or old, lionel, williams or MTH. Its great to have all these choices but 15 years ago all I could dream about was postwar F3's but now that Lionel has reissued so many of their originals and now that MTH is making similair models its hard to decide. Which would you pick?
-Lionel 2343 Excellent Condition $500
-Lionel Kansas City Southern - LN $399
-Lionel Rio Grande postwar celebration series remake - $499
-Lionel Souther pwc remake -$499
-MTH FEC - $459
  • Member since
    December 2003
  • From: Old Florida
  • 355 posts
Posted by FEClionel on Sunday, October 24, 2004 4:35 PM
Yeah I think he needs to calm down about MTH. I like it - I once thought they were evil and a cheap knock off of Lionel - which they might be but they make cool stuff and alittle competition can be a good thing in a stagnent business market like toy trains.
  • Member since
    December 2001
  • From: Austin, TX
  • 10,096 posts
Posted by lionelsoni on Sunday, October 24, 2004 4:27 PM
How nice, a "civil" servant.

Bob Nelson

  • Member since
    April 2003
  • 305,205 posts
Posted by Anonymous on Sunday, October 24, 2004 4:00 PM
OH YES DCS...AFTER 2 YEARS, STILL TRYING TO WORK SOME BUGS OUT...WHAT GARBAGE.

PLEASE, MTH IS JUNK, GET WITH IT.
  • Member since
    December 2003
  • From: Old Florida
  • 355 posts
Posted by FEClionel on Sunday, October 24, 2004 3:47 PM
I don't want to run DCS or TMCC - I run my trains on teh floor so no need for anything more than my ZW. I also only use O guage track - the rest of the time the items are on a shelf. I now think the Lionel ABA F3 would have been a better choice.
  • Member since
    April 2003
  • From: Willoughby, Ohio
  • 5,231 posts
Posted by spankybird on Sunday, October 24, 2004 12:22 PM
John, should also note that Magetraction only works well on steel track.

That's one reason I still use tube track.

I am a person with a very active inner child. This is why my wife loves me so. Willoughby, Ohio - the home of the CP & E RR. OTTS Founder www.spankybird.shutterfly.com 

  • Member since
    May 2004
  • From: Kaukauna WI
  • 2,115 posts
Posted by 3railguy on Sunday, October 24, 2004 12:02 PM
FEC, I did not see your post where you bought the MTH set. The MTH set is nice.
John Long Give me Magnetraction or give me Death.
  • Member since
    February 2004
  • From: Rolesville, NC
  • 15,416 posts
Posted by ChiefEagles on Sunday, October 24, 2004 7:55 AM
[:-^][:-^][:-^][zzz][;)] FDNY and buddy.
FEClionel, think about what 3rail says. Save up and go DCS. I did not want too in the beginning but did and now I am glad. It is real easy to operate and yu will love it. That can be a goal for you to save up for. Enjoy your new pruchase and good luck.

 God bless TCA 05-58541   Benefactor Member of the NRA,  Member of the American Legion,   Retired Boss Hog of Roseyville Laugh,   KC&D QualifiedCowboy       

              

  • Member since
    April 2003
  • 305,205 posts
Posted by Anonymous on Sunday, October 24, 2004 7:21 AM
I would only buy the Lionel model. I could never give MTH any of my money (I never have and never will) after finding out how they run their company. All they ever do is copy everyone else's products and then have the nerve to sue Lionel for the same behavior. I am personnaly buycotting MTH and encourage everyone else to do the same. As far as the sound system and smoke being good features of either model, my experience is they both get very annoying after a short time and get turn off anyway, so who needs them.
  • Member since
    April 2003
  • 305,205 posts
Posted by Anonymous on Sunday, October 24, 2004 12:36 AM
PREJUDICE??????? why should i be called that, after SO MANY people forgot how they really got into this hobby, with LIONEL, then went to MTH.
MTH is JUNK, nothing but a copycat artist.... I started with LIONEL, and STAYING WITH LIONEL, all the way.
And yes FIRE DEPT OF NYC, good guess, thats my JOB

Join our Community!

Our community is FREE to join. To participate you must either login or register for an account.

Search the Community

FREE EMAIL NEWSLETTER

Get the Classic Toy Trains newsletter delivered to your inbox twice a month