Trains.com

100 years of O gauge

2063 views
8 replies
1 rating 2 rating 3 rating 4 rating 5 rating
  • Member since
    January 2014
  • 226 posts
Posted by thesiding on Monday, August 25, 2014 10:40 PM

Some kids do move on     some do not

  • Member since
    September 2010
  • From: Parma Heights Ohio
  • 3,442 posts
Posted by Penny Trains on Monday, August 25, 2014 8:57 PM

It would be nice if Lionel by way of the LCT/MTH division would release some early repro O gauge equipment.  The small locos (150, 258, 259, etc.) and early 4 wheel cars come to mind.

The last half dozen years or so of Tinplate Traditions and now Lionel Corporation Tinplate have seen A LOT of classic period prewar trains put out with paint jobs that aren't even close to anything Lionel, Flyer or Ives even considered doing way back when.  Call me jaded, but I believe a 517 caboose should be brass and/or nickel trim and heavily enameled stamped steel parts.  Not rubber stamped graphics.  I just think they cheapen the look of the trains.

Is it reasonable to assume that since so many of these cars now fill the LCT catalogs that Lionel/MTH are searching for revenue from the tinplate division?  Adding the 6 and 7 and their associated passenger cars a few years back was the first move since the 80's that they made towards early period  standard gauge.  But wouldn't it make sense to add more low end sets and broaden the market appeal by producing some of the simplest trains instead of creating paint schemes that turn some of us off?  There are a lot of simple locos and cars that could be stamped out using the motors and trucks they've already developed.  Just my My 2 Cents

Becky

Trains, trains, wonderful trains.  The more you get, the more you toot!  Big Smile

  • Member since
    February 2014
  • 77 posts
Posted by Rob412 on Monday, August 25, 2014 7:30 PM
As long as there are real trains there will be a following for their model counterparts. If only some of the kids who play with Thomas the Tank stay on the hobby will do fine. So raise a glass for 100 years and to the next 100.
  • Member since
    July 2002
  • From: A State of Humidity
  • 2,441 posts
Posted by wallyworld on Monday, August 25, 2014 5:27 PM

Regardless of how we count, it's remarkable that this hobby that arrived 100 years ago or so still has a loyal following. Hula hoops, soap box racers, slot cars etc all peaked only to vanish in popularity and that says a great deal about not only current fads but the future of the hobby in general.

Nothing is more fairly distributed than common sense: no one thinks he needs more of it than he already has.

  • Member since
    January 2014
  • 226 posts
Posted by thesiding on Monday, August 25, 2014 5:16 PM

Also did not Marklin?

Lionel DID give us three rail o gauge and trains made all those years ago SHOULD run on all track that is three rail

  • Member since
    August 2011
  • 635 posts
Posted by Nationwidelines on Monday, August 25, 2014 5:10 PM
Lionel certainly was not first in O gauge. American Flyer began producing O gauge in 1907, under the name Edmonds-Metzel. Ives and others produced O gauge even earlier.
  • Member since
    January 2013
  • 993 posts
Posted by lion88roar on Monday, August 25, 2014 3:15 PM

Actually that isn't quite true... 2014 *this year* would be year 100. We start counting years in year 1, not 0. This is why technically decades run from 1 to 10, not 0 to 9. Big Smile

https://brentsandsusanspicutures.shutterfly.com/

  • Member since
    December 2001
  • From: Austin, TX
  • 10,096 posts
Posted by lionelsoni on Monday, August 25, 2014 8:35 AM

This would be the centenary of Lionel O-gauge, of course, not O-gauge in general, which was introduced earlier by Maerklin.

Bob Nelson

  • Member since
    December 2001
  • From: US
  • 1,475 posts
100 years of O gauge
Posted by overall on Monday, August 25, 2014 7:18 AM
Those of you who are informed on Lionel's history know that Joshua Cowen introduced O gauge in 1915, so next year marks it's 100th anniversary. Does anyone know if Lionel plans any special products for the occasion? His first O gauge locomotive was based on a New York Central Electric that worked around Grand Central Terminal ( I think ). Maybe Overlord would know?

Join our Community!

Our community is FREE to join. To participate you must either login or register for an account.

Search the Community

FREE EMAIL NEWSLETTER

Get the Classic Toy Trains newsletter delivered to your inbox twice a month