Modern 445 switch tower ( Lionel 6-12917)

[rrswede]

 Bought used 6-12917 switch tower. Has 4 ea. connector clips, all in a line, titled AC Power, AC power, Action, and Light. A wiring schematic molded into the base of the unit shows connections to be made between the second AC Power clip, Action, and Light. When bench testing the unit, I had to connect power to the first AC Power clip to get Action and Light to operate. I took the base off the switch tower and discovered o the second there was no internal wire connected to the second AC power clip. I have searched the internet for a photo or schematic showing the internal connections but have not located either. Would you happen to have such a schematic? If not, would one of you be so helpful as to post a  photo that shows where the second AC Power connects internally? I would be most appreciative.

A second question regarding this unit if I might. After getting the internal wiring straightened out, do you know if it is possible to make external connections to operate the light off a accessory transformer and separately operate the Action function using an isolated track?

Many thanks, Swede

 

[TrainLarry]

Could you post  photos of the markings and the underside wiring connections of your unit. It will help in getting answers to your questions. Thanks.

Larry

[lionelsoni]

Here's a link to a current Ebay auction that has a picture of the bottom:  http://www.ebay.com/itm/LIONEL-445-SWITCH-TOWER-6-12917-in-ORIGINAL-BOX-with-INSTRUCTIONS-/291118474428?pt=Model_RR_Trains&hash=item43c80364bc#ht_925wt_607

[TrainLarry]

Thanks, Bob for the link. Here is an exploded view and internal wiring diagram for the unit.

Larry

[rrswede]

Thank you very much for the assistance, Larry and Bob. The exploded view provided by Larry indicates the second AC Power clip is not connected to anything. I have printed out the exploded view to file with the operating instructions. Also, I was successful in wiring the lights to operate with an accessory transformer and operate the Action function using a isolated track.

Thanks again, Swede