Trains.com

MTH Puffing Smoke

1838 views
5 replies
1 rating 2 rating 3 rating 4 rating 5 rating
  • Member since
    June 2011
  • From: Way out West
  • 440 posts
MTH Puffing Smoke
Posted by RRaddict on Thursday, May 30, 2013 12:25 PM

I was hoping some one here coud shed some light on why some of my MTH Proto 1 steamers have puffing smoke while others just have a steady stream of smoke?

Kev

Can't stop working on the railroad!

  • Member since
    December 2006
  • 1,207 posts
Posted by stebbycentral on Friday, May 31, 2013 4:05 PM

I admit to knowing nothing about the innards of this particular manufacturer's locomotives.  However based upon my knowledge of other model locomotives, it would seem that just about any smoking mechanism is going to involve a piston or bellows that perodically injects air into the smoke chamber to get the puff effect.  This is where you would want to start. 

It could be the "puffer" itself is not working for some reason.  Such a mechanism will either be run directly off of the main drive train, or it will have it's own motor.  If it appears to be working then It could be a torn bellows, or an air leak somewhere in the mechanism.  It could be something as simple as the air inlet from the puffer into the smoke chamber is clogged up. It should not be that hard to troubleshoot.

I have figured out what is wrong with my brain!  On the left side nothing works right, and on the right side there is nothing left!

  • Member since
    December 2001
  • From: Austin, TX
  • 10,096 posts
Posted by lionelsoni on Friday, May 31, 2013 6:28 PM

My Rail-King Big Boy's smoke generator has a miniature motor-driven fan that blows continuously and is obviously not intended to puff.

Bob Nelson

  • Member since
    March 2012
  • 291 posts
Posted by Dave632 on Saturday, June 1, 2013 3:36 PM

I  have some modern Lionel units and they have a fan driven smoke unit that seems to operate by a timed mechanism driven by the wheel speed. They only smoke when the wheels turn.

 I must say they smoke much better than any of the post war units that use the old piston setup.

I also have Lionel diesels that smoke steadily even though they use fan driven units too.

  • Member since
    March 2013
  • 563 posts
Posted by BigAl 956 on Thursday, June 6, 2013 6:21 PM

MTH has been the industry leader for smoke. Railking PS1 engines usually have a fan driven smoke unit. It does not puff as the smoke is expelled by a fan that blows it out continuously.Higher end Premier MTH locomotives introduced computer controlled fans. On these engines a circuit board pulses the fan to produce a puffing smoke. I thought these models were not introduced until PS2 came out. Maybe your engine is a Premier series with an upgraded smoke control.

  • Member since
    June 2011
  • From: Way out West
  • 440 posts
Posted by RRaddict on Friday, June 7, 2013 10:01 AM

All my Steamers from MTH are definitely Rail King models. I did notice that the ones that puff have the striped band on the motor with an eye to read it so I figure this is how it puffs.

Kev

Can't stop working on the railroad!

Join our Community!

Our community is FREE to join. To participate you must either login or register for an account.

Search the Community

FREE EMAIL NEWSLETTER

Get the Classic Toy Trains newsletter delivered to your inbox twice a month