Trains.com

Pictures of my portable layout

1709 views
14 replies
1 rating 2 rating 3 rating 4 rating 5 rating
  • Member since
    August 2003
  • 6,434 posts
Posted by FJ and G on Friday, September 17, 2004 10:59 AM
Jim,

Love that Santa Fe diesel switcher and the little steam engine; also the MPC-era cars. The trains suit the 027 layout perfectly.
  • Member since
    December 2001
  • From: Austin, TX
  • 10,096 posts
Posted by lionelsoni on Friday, September 17, 2004 10:43 AM
Jim, I wouldn't worry too much about getting the wiring into the door or under the roadbed. The hollow-core doors are solid wood around the edges and in a small area where the doorknob is expected to go, cardboard on edge everywhere else. I would just fasten the wires closely to the bottom. You can get cable ties with molded-in screw holes for that. The extra quarter inch or so will not matter at all on carpet. If you want, you can fasten small blocks of wood or rubber feet to the bottom to create clearance on hard surfaces. Of course, if you attach legs, there is no problem at all.

Bob Nelson

  • Member since
    April 2003
  • 305,205 posts
Posted by Anonymous on Thursday, September 16, 2004 7:55 PM
I actually decided not to fold it up. It will just be 2 seperat doors. That way I wont need 2 people to move it around. The doors are pretty light but with 2 of them I would need a second person to carry them into another room or down to the garage. I do like the idea of the magnets though. Thank you for the suggetion and I will use them.
  • Member since
    April 2004
  • From: Holland
  • 1,404 posts
Posted by daan on Thursday, September 16, 2004 8:35 AM
How are you planning to fold it? Are you making the hings in the middle and fold it with the tracks outwards or do you fold it with the track inwards on levelled hinges? You could use magnets or so to get buildings semi fixed on your layout but still be able to take them off when folding the layout. I used that once on a movable layout in h0 scale and it works great. (specially with working models which vibrate themselves a way across the layout when not fixed properly).
Looks great by the way.
Daan. I'm Dutch, but only by country...
  • Member since
    April 2003
  • 305,205 posts
Posted by Anonymous on Wednesday, September 15, 2004 7:57 PM
Accessories are on the way. Frist off I want to lay a cork road bed, run all the wiring either thru the door itself or under the cork so its all hidden, and maybe make a small control panel for the switches and blocks. I might even run a small trolley line to go with my postwar trolley I have. Then I will add some buildings and some roads and secenery. I want to make this layout as portable as possible so I will be very limited on what I can add.
  • Member since
    April 2003
  • 305,205 posts
Posted by Anonymous on Wednesday, September 15, 2004 7:15 AM
Looking very good Jim!! You should now get some accesories, you have some emty space there you need to fill.
  • Member since
    April 2004
  • From: Holland
  • 1,404 posts
Posted by daan on Wednesday, September 15, 2004 5:22 AM
@Jim, are you originally from Holland? De Vleer is a dutch backname.. meaning "the Bat" (like Batman..)
Daan. I'm Dutch, but only by country...
  • Member since
    April 2003
  • 305,205 posts
Posted by Anonymous on Tuesday, September 14, 2004 10:04 PM
They thanks for all the advice. The layout is 2 36" x 80" doors put side to side. When I want to put it aaway i just undo the 2 latches I used and pick up the doors and stand them up in a closet. And yes that is one of the new dockside switchers. It is a sweet running little engine. I also have my post war 665 and my Santa Fe switcher on the layout. But the Santa Fe switcher is up for sale on ebay right now to fund more train stuff.
  • Member since
    April 2003
  • 305,205 posts
Posted by Anonymous on Tuesday, September 14, 2004 9:31 PM
Thanks for sharing with us Jim. It looks great. You have put a lot into the space you have available. Keep us updated. By the way the partions inside the hollow core doors are cardboard. You can drill thru the edge and the partions if you or a friend have a drill bit of the type used by telephone installers and cable tv guys. It is about 1/4" dia. and varies in length from 3' to 6'. It even has a hole in the end of the bit to pull a wire back through once the hole is drilled.... Tim
  • Member since
    January 2003
  • From: Frankfort, Kentucky
  • 1,758 posts
Posted by ben10ben on Tuesday, September 14, 2004 9:06 PM
Very, very nice.

Is that one of Lionel's new Docksiders running on the inner loop?
Ben TCA 09-63474
  • Member since
    April 2003
  • 305,205 posts
Posted by Anonymous on Tuesday, September 14, 2004 8:55 PM
How big is your layout?
  • Member since
    May 2004
  • From: Kaukauna WI
  • 2,115 posts
Posted by 3railguy on Tuesday, September 14, 2004 8:35 PM
To deaden sound, slip 1/8" x 1/4" pieces of foam weatherstrip under the ties. (cut same length as ties)

You can convert your two automatic switches to fixed voltage. You have to drill out the rivets to get the switches apart and re-rivet them when finished. Inside there is a conductor that takes power from the center rail. You clip this conductor and solder a feed wire to the side that feeds the switch machine coil.
John Long Give me Magnetraction or give me Death.
  • Member since
    April 2003
  • 305,205 posts
Posted by Anonymous on Tuesday, September 14, 2004 8:23 PM
Actually none of my switches are powered except the 2 O42 ones. That might change in the near future. I already had these switches sititng in boxes and really dont have the money at the moment to go out and buy powered ones yet.
  • Member since
    April 2003
  • From: Willoughby, Ohio
  • 5,231 posts
Posted by spankybird on Tuesday, September 14, 2004 8:17 PM
Very nice Jim,

BTW if you wi***o post the pictures on the forum, this will help

http://www.trains.com/community/forum/topic.asp?TOPIC_ID=20382

I noticed that you are using 027 track. The only thing that I changed on my layout was the Lionel 027 turnouts for the K-line low profile 027 turnouts. This allows you to run longer cars – engines on this track. Also the K-lines do not BUZZ when the trains goes over them or is parked on one. They also can be run from fixed power instead of track power.




tom

I am a person with a very active inner child. This is why my wife loves me so. Willoughby, Ohio - the home of the CP & E RR. OTTS Founder www.spankybird.shutterfly.com 

  • Member since
    April 2003
  • 305,205 posts
Pictures of my portable layout
Posted by Anonymous on Tuesday, September 14, 2004 7:58 PM
Here is some pictures of the start of my portable layout. I have some track layed and can run 2 trains at a time. It has a siding on the outside loop and a small yard off the inside loop. I am still tryign to decide if I want to lay a small trolly line. I really wish I coudl have a much bigger and perment layout but for now I am having alot of fun doing this. My next sept is to find a way to run all the wireing inside the door. Not too sure how I am going to be able to do this because even thoug the doors are hollow I think there is supports ever foot or so. If that doesnt work I was going to lay a cork roadbed under the track so I will run all the wiring under the cork so it is hidden. I am going to dig out a few of my plasticville buildings and set them up. Maybe a small station and a switch tower. Let me knwo what you think and if you have any suggestions.

http://home.comcast.net/~jdevleerjr/1.JPG

http://home.comcast.net/~jdevleerjr/2.JPG

http://home.comcast.net/~jdevleerjr/3.JPG

http://home.comcast.net/~jdevleerjr/4.JPG

http://home.comcast.net/~jdevleerjr/5.JPG



Join our Community!

Our community is FREE to join. To participate you must either login or register for an account.

Search the Community

FREE EMAIL NEWSLETTER

Get the Classic Toy Trains newsletter delivered to your inbox twice a month