Trains.com

Water and layouts

1857 views
6 replies
1 rating 2 rating 3 rating 4 rating 5 rating
  • Member since
    December 2012
  • 51 posts
Water and layouts
Posted by guitarman1994 on Sunday, January 20, 2013 8:32 PM

Is having real water on a layout a good idea? It would be non moving and be a pond. Is real water ok or should I find someway to make "fake" water?

Brody

  • Member since
    January 2009
  • 1,986 posts
Posted by 8ntruck on Sunday, January 20, 2013 11:37 PM

There are some layouts that have real water on them.  However, the real water can create maintenance problems like leaks and stuff that might grow in stagnent water.  Water does not mix very well with electricity either.

There are, many ways to simulate water on a layout from using tinted casting resins, painted aluminium foil, paints and glazes, to name a few.  I have not personally tried any of these methods, but I'll bet there is somebody on this forum who has.

You might try a search on the forum for  modeling water to see what turns up.

Good luck.

  • Member since
    October 2010
  • 98 posts
Posted by scrambler81 on Monday, January 21, 2013 6:28 AM

 The ChooChoo Barn in Strasburg, Pa. uses real water in a few spots around their layout. Several people have suggested I do the same, but I haven't really looked into the best way to seal it up yet. It does look great when done well, but that will need to be measured against the amount of work required.

 I do know that even your "pond" would need a pump and a filter. Without those, that water will get real rank, real fast. If you do it, let us know how it works out.

KRM
  • Member since
    January 2011
  • From: North Bluff above Marseilles IL
  • 6,506 posts
Posted by KRM on Monday, January 21, 2013 12:12 PM

Brody,

 Here is a tread from last December on the same subject that may be of help.

http://cs.trains.com/ctt/f/95/t/212739.aspx

Joined 1-21-2011    TCA 13-68614

Kev, From The North Bluff Above Marseilles IL. Whistling

 

  • Member since
    March 2004
  • From: Adel, Iowa
  • 2,292 posts
Posted by jonadel on Tuesday, January 22, 2013 8:03 PM

I believe real water is just an invitation for disaster at it's worst.  We have a wonderful fake water falls that goes into a beautiful lake/pond and we are very pleased.  I think real water just opens a can worms that I want no part of, just my .02.

Jon

So many roads, so little time. 

 

  • Member since
    January 2004
  • From: morris il.
  • 102 posts
Posted by cmrj on Wednesday, January 23, 2013 5:02 AM

Keep in  mind that water dosent dry up it evaporates ,moisture is  something I would not want in my train room.  Bleach something that should not be any where near  a Classic Toy Train room. I also keep a dehumidifier running during the summer, just to keep the moisture in check. There are a lot of products out there that look like real water, much better choice.     Mike

  • Member since
    March 2009
  • From: Central Texas
  • 318 posts
Posted by Texas Pete on Wednesday, January 23, 2013 9:18 AM

Strongly recommend you just say "no" to real water on a toy train layout, however the final decision, of course, is yours.

Pete

"You can’t study the darkness by flooding it with light."  - Edward Abbey -

Join our Community!

Our community is FREE to join. To participate you must either login or register for an account.

Search the Community

FREE EMAIL NEWSLETTER

Get the Classic Toy Trains newsletter delivered to your inbox twice a month