Wiring a rheostat

[Jim Hornaday]

Give it sugar and coffee?? That usually gets me wired..........

Sorry, I couldn't resist!!

[Penny Trains]

3 Lionel 95's wired to 60 watt Type A, 100 watt Type T and 150 watt Type K transformers:

This one was being installed to the table surface while I built the layout:

This one is mounted on a block of wood and has an extra long wire attached.  "Early 20th Century Remote Control"

[ljliberto]

Me too. A picture of one connected would be helpful. Thanks

[Ribdoner]

Using the rheostat because this is how we did it as kids, just going back in time for fun

[cwburfle]

 

I have occasionally run with a rheostat

I have fond memories of running my uncle's 10E set with a rheostat and one of the old stepped voltage transformers (don't remember which one).
The set was in very "played with" condition, with bits of wire replacing most of the couples, and joining Lionel, American Flyer and Ives rolling stock.

[lionelsoni]

I don't know Ribdoner's reason; but I have occasionally run with a rheostat and, incidentally, a Z transformer.  It has a different feel from using the transformer knob.  I think the appeal is that the train doesn't respond as abruptly and fully to control changes and so resembles in a way the delayed response that you would get at a real locomotive's controls.

[cwburfle]

If you are connecting the "U" terminal to the outside rails, and operating any accessories, including lights, that use the outside rails to get power, then you want to put the rheostat in the other wire (hot side). Otherwise the rehostat will affect those accessories.

Just curious: why are you using a rheostat with a type "Z" transformer?

[rtraincollector]

Hope I don't get this back wards lol but take a wire and run it from the U side of the transformer to the track then take a wire from the a run it to the rheostat left side I believe and then take a wire from the right side and run it to the track

[Ribdoner]

I have a Lionel #95 rheostat and need help on how to wire it to run a train.  It has been a long time since I have used it, I am running it off a Lionel Z transformer.

thnks