Trains.com

O22 switch question

767 views
5 replies
1 rating 2 rating 3 rating 4 rating 5 rating
  • Member since
    April 2010
  • 269 posts
Posted by silentman on Wednesday, October 26, 2011 6:07 PM

So just go from  terminal post C to the breaker to the plug that goes into the switch? If that's correct is it ok to wire all the switches together and use one breaker? I'm only using four switches on this loop.

  • Member since
    December 2001
  • From: Austin, TX
  • 10,096 posts
Posted by lionelsoni on Wednesday, October 26, 2011 11:05 AM

Not at Radio Shack.  Get an automotive-type 10-ampere breaker at an auto parts store.  It will be rated at 12 volts DC; but you can ignore that, since AC operation, even at the slightly higher voltages we use, is much easier on the part than DC is.

Bob Nelson

  • Member since
    April 2010
  • 269 posts
Posted by silentman on Wednesday, October 26, 2011 9:43 AM

lionelsoni

You should use wire that can safely carry the maximum current that the transformer can put out, which is 15 amperes.  That would be 14 AWG.

If you don't need that much current for your turnouts and therefore don't want to run that heavy a wire, you can put a circuit breaker or fuse in series with the transformer terminal, to limit the current to a lower value.  For example, 16 AWG is safe for 10 amperes, 18 AWG for 7 amperes, 20 AWG for 5 amperes.

 

Bob so if I go with 16 AWG being electrically challenged and trying to learn how, what and where do I put a circuit breaker in series with the transformer. Is this something I can pick up at Radio Shack?

  • Member since
    December 2001
  • From: Austin, TX
  • 10,096 posts
Posted by lionelsoni on Tuesday, October 25, 2011 9:32 PM

You should use wire that can safely carry the maximum current that the transformer can put out, which is 15 amperes.  That would be 14 AWG.

If you don't need that much current for your turnouts and therefore don't want to run that heavy a wire, you can put a circuit breaker or fuse in series with the transformer terminal, to limit the current to a lower value.  For example, 16 AWG is safe for 10 amperes, 18 AWG for 7 amperes, 20 AWG for 5 amperes.

Bob Nelson

  • Member since
    October 2004
  • From: S.E. Ohio
  • 5,434 posts
Posted by Blueberryhill RR on Tuesday, October 25, 2011 7:53 PM

Not a dumb question..... I use 16 guage wire for my 022 switches. All 12 of them. I have them wired to my ZW at post "C".  Set at 16 volts.

Chuck

Chuck # 3 I found my thrill on Blueberryhill !!
  • Member since
    April 2010
  • 269 posts
O22 switch question
Posted by silentman on Tuesday, October 25, 2011 7:13 PM

What would be the correct size wire to use for the fixed voltage plug. I'm using a older zw and would it be correct to run the wire to the C post for separate power? Thanks for answering my dumb questions.

Join our Community!

Our community is FREE to join. To participate you must either login or register for an account.

Search the Community

FREE EMAIL NEWSLETTER

Get the Classic Toy Trains newsletter delivered to your inbox twice a month