Lionel 440N and 439 Control Panel!! Need Help!!

[cwburfle]

 Those 440C are always missing the levers, they seem to break off easily. 

 

Yes, in fact, I need one for my 440C.

[lionel2]

Well, I did get it to work.  I used (2) 222 swiches that mount on the 439.  I was able to wire it up that way and get it to work.  Only for a little bit, until I can get my hands on a 440C.  The correct control board for my 440 signal bridge.  Thanks for the help though.  Those 440C are always missing the levers, they seem to break off easily. 

[cwburfle]

While the 439 control panel does look similar to the control panel for a 440 signal bridge, it is not desiged to be used with the 440.
A 440 signal bridge uses a 440C control panel.
A 439 control panel has six knife switches across the back.
A 440C control panel has two special switches centered on the back  to control the lights on the signal bridge, with two knife switches on each side (total four knife switches)

 

[lionel2]

Hello, I have a 440N and 439 Control board panel.  How do you wire these up to work together??  I do not have a manual for these.  I have them wired up, but the lights on the 440N does not stay on all the time.  Only on when I activate the 222 switches that are on the 439.  Any ideas let me know. Thanks.