Transformers for Lionel standard gauge

[rtraincollector]

I have a 14' X 16' loop and run my 8E with 337 & 338 passenger cars illuminated and use my postwar zw and have no problem at all and have yet to take it pass 1/2 way up on the control

[lionel2]

I have a 15x8 Standard gauge layout and I use (4) Z 250 watt transformers.  These transformers you will see the best results with standard gauge trains.  Must have 24+ volts going to these standard gauge trains.  You can use Postwar Transformers, such as KW or ZW's but might be pushing them to max.  Hope this helps!!

[Penny Trains]

I use a 150w Type K and a 95 rheostat to run my #8 on it's simple oval.  I also have a semaphore, 87 crossing gate, 145 gateman and a bell ringing signal drawing power with no problems.  Although the rheostat does get a bit warm! 

Becky

[servoguy]

You do need track (smile).  The post war transformers will work just fine.  I have 2 standard gauge engines and some track and they run just fine with a ZW.

[dbgmnfan]

I have recently acquired my first pieces of Lionel standard gauge, including a 318 locomotive.  Can this engine be run with a postwar Lionel transformer, such as a ZW or RW?  Or do I need something else?  (Besides the track, which I now also have to buy.)  Thanks!