Trains.com

What should I lubricate da cows with?

2493 views
19 replies
1 rating 2 rating 3 rating 4 rating 5 rating
  • Member since
    April 2003
  • 305,205 posts
What should I lubricate da cows with?
Posted by Anonymous on Thursday, July 8, 2004 8:01 AM
I was looking at my steers today. And I noticed that the front was getting softer.(where I was lubricating) I asked my dad, "is it ok if i use vasoline on rubber?" He said petroleum would deteriorate the rubber cows until they would fall apart![:0]

What type of lubricant should I use?
  • Member since
    August 2003
  • 6,434 posts
Posted by FJ and G on Thursday, July 8, 2004 8:10 AM
Are these operating cattle for the cattle car? I'd try ARmorall. Don't know if it's spelled that way. For moving parts, graphite.
  • Member since
    February 2004
  • From: Rolesville, NC
  • 15,416 posts
Posted by ChiefEagles on Thursday, July 8, 2004 8:52 AM
NO Armoral!!!!!! Take it from a former fleet guy. Armoral is bad for everything. If not used continously, will dry out rubber and vinyl and cause it to crack. I know as we use to use it on our vehicles. It will actually cause side walls of tries to crack. Try some synthetic lube or dielectric [will not attack rubber]. Surprised that Vasoline is attacking the rubber. Vasoline is usually good around rubber.

 God bless TCA 05-58541   Benefactor Member of the NRA,  Member of the American Legion,   Retired Boss Hog of Roseyville Laugh,   KC&D QualifiedCowboy       

              

  • Member since
    August 2003
  • 6,434 posts
Posted by FJ and G on Thursday, July 8, 2004 9:05 AM
Thanks, Chief, I'll dump the Armoral somewhere. Learn something new on the forum every day!
  • Member since
    April 2003
  • 305,205 posts
Posted by Anonymous on Thursday, July 8, 2004 9:37 AM
Well, it just bends more. These are the postwar operating cattle
  • Member since
    July 2003
  • From: Watkinsville, GA
  • 2,214 posts
Posted by Roger Bielen on Thursday, July 8, 2004 12:53 PM
I use mine as a static display, I don't remember mine ever working right since I got it in the 50's.
Roger B.
  • Member since
    January 2003
  • From: Frankfort, Kentucky
  • 1,758 posts
Posted by ben10ben on Thursday, July 8, 2004 1:45 PM
I would think that powdered graphite would probably be the best thing to use.
Ben TCA 09-63474
  • Member since
    January 2014
  • 248 posts
Posted by Dr.Fu-Manchu on Thursday, July 15, 2004 2:32 AM
The [}:)] Doctor is in! Jerry, As far as I know, you are not susposed to lube the cows!!!!!!
What made you think they needed to be lubed in the first place? I sent you instructions
on the cattle car & stockyard, did it say anything about lubing the cows? Please ask
before you do something like that again. I can save you much trouble in such matters.

I Remain The Humble, Yet Strangely [}:)] Doctor !!!!
  • Member since
    April 2003
  • 305,205 posts
Posted by Anonymous on Thursday, July 15, 2004 7:46 AM
Yeah it said that in there, to lubricate the front of them to make them turn easier.
  • Member since
    April 2003
  • 305,205 posts
Posted by Anonymous on Sunday, July 18, 2004 10:38 AM
To much lube and your cows might get the shitz as we farmers say.[:D]

Lon
  • Member since
    January 2014
  • 248 posts
Posted by Dr.Fu-Manchu on Thursday, July 29, 2004 2:59 AM
The [}:)] Doctor is in!!! Jerry, I owe you a big "I was wrong" I blame old age & Nayland
Smith for hiding my K-Line book. It did say to lube the front edge of the cows, What you
did not do was use Lionel Lube. Go to a Lionel Dealer and buy a tune-up kit(I think it is
called that) which has a tube of lube, track cleaner & a track cleaner eraser. Also, there
is a needle tube of oil. The oil & lube are for motors and wheels. The lube will work on
the cows. That is the only stuff to use. Hope this helps!
Till My Next Missive, I Remain The Humble, Yet Strangly [}:)] Doctor !!!!!
  • Member since
    July 2002
  • 13 posts
Posted by winnipegtrainguy on Thursday, July 29, 2004 12:37 PM
I always thought that you needed to grease the platform the cattle glided on, and not their little feet. Powdered graphite is always safe, but messy if you get it on your hands.
Horrors! I recently sprayed my sidewalls with Armor All! Now, how do it get it off?
  • Member since
    April 2003
  • 305,205 posts
Posted by Anonymous on Thursday, July 29, 2004 7:42 PM
Doctor or anyone else out there,

My cattle car does not vibrate as well as it should, meaning the cows aren't a moving very fast it all. When I took it apart I noticed that a couple of the circular pads under the track were missing. Any suggestions on how to repair and anything else I should do to get it up and running like new?

Mike
  • Member since
    April 2003
  • 305,205 posts
Posted by Anonymous on Thursday, July 29, 2004 7:55 PM
Utterly ridiculous,"bag balm", of course!
  • Member since
    February 2004
  • 150 posts
Posted by pennsy_fan on Thursday, July 29, 2004 8:04 PM
Hi rrcrossing-fr, you can buy circular little replacement pads from most parts dealers that advertise in CTT. Your local hobby shop may even have some to sell.
  • Member since
    January 2014
  • 248 posts
Posted by Dr.Fu-Manchu on Friday, July 30, 2004 2:47 AM
Mike, The [}:)] Doctor is in!!! The pads are easy to get from most parts dealers. I also
think you should buy a repair book(K-Line or Greenburg) There also was a tune-up
article in CTT for the stockyard & car. I will look it up later if you can't find it. It's a simple
fix, then the cows will keep mooing along!(sorry, bad pun) You may also need to adjust
the screw that controls the vibration. They need tweeking now & then. If you need more
help, Email me and I will be at your service.
Till My Next Missive, I Remain The Humble,Yet Strangly [}:)] Doctor !!!
  • Member since
    April 2003
  • 305,205 posts
Posted by Anonymous on Friday, July 30, 2004 11:07 AM
Dr. Fu,

Thanks for the advice. I'll pick up a repair book and see if I can find the CTT article.

Mike
  • Member since
    January 2014
  • 248 posts
Posted by Dr.Fu-Manchu on Saturday, July 31, 2004 2:11 AM
Mike, The [}:)] Doctor Is in !!! I found the article, Its in the Dec 1996 issue of CTT. If you
cannot find the issue, send me your snail mail address and I will photocopy the article
and mail it to you.
Till My Next Missive, I Remain The Humble, Yet [}:)] Doctor !!!
  • Member since
    July 2003
  • From: Fremont, CA, USA
  • 213 posts
Posted by macdannyk1 on Saturday, July 31, 2004 3:34 PM
Hmmm...tweeking and lubing the cows--what is this, The Simple Life? :)
Dan Member and Webmaster, Golden State TTOS
  • Member since
    April 2003
  • 305,205 posts
Posted by Anonymous on Sunday, August 1, 2004 10:19 AM
Many thanks Doc!!!

Mike

Join our Community!

Our community is FREE to join. To participate you must either login or register for an account.

Search the Community

FREE EMAIL NEWSLETTER

Get the Classic Toy Trains newsletter delivered to your inbox twice a month