Has anyone upgraded a Williams #21527 non-powered GP9 to a powered unit? (There are Williams upgrade kits available on the internet for roughly $100.) If so, how long did it take? Are any special tools (besides the typical hand tools) required?
Finally, once powered, how does a Williams unit pull when coupled with a Lionel unit? I'm considering using a Williams GP9 with a Lionel GP7, which appears to be a lighter (weight) locomotive.
Thanks in advance for any advice or suggestions.
Merry Christmas and Happy New year!
I have upgraded an older F-7 unpowered diesel unit to power, the upgrade is rather simple. You remove the wheel sets from the unpowered unit and install the new wheelsets, and re-install the front and rear couplers to the powered wheelsets. On the kit I got there was NO lock-out feature for direction control. Should take about 45 minutes to an hour for the upgrade kit to be installed.
With the F-7 I had to drill the hole larger in the step plate for the cab's side steps, but you may not need this step as you will be doing a current model to current model upgrade.
The powered Williams engine will most likely damage your Lionel GP-7! I recomend buying a second powered Williams GP-9 or GP-7. Williams has all metal gears and I can not say that your Lionel GP-7 has the same, Lionel probally has plastic gears.
Lee F.
Our community is FREE to join. To participate you must either login or register for an account.
Get the Classic Toy Trains newsletter delivered to your inbox twice a month