What you did is known as a 'factory reset'. If it isn't working after doing this then I would try to program a new eng ID and see if it resets. If it still doesn't then you may need to take it to service center. Sorry I couldn't be of more help.
I read the complete manual at http://www.lionel.com/media/servicedocuments/73-8030-250.pdf and the only instruction I could find about dealing with a program problem is on page 19. I can not find any instructions about how to do a factory reset. Please tell me which page of the manual the factory reset instruction is located. Thanks.
Have you tried a factory reset? The instructions on how to do this is in the user manual that came with the engine.
I have two Lionel 2-8-8-2 TMCC trains. One is a 6-38030 and the other is the 6-38065. They both had smoke problems and I was able to fix the smoke problems on them by reprogramming with using the recommended "74" code. Now they both have the same issue of not responding to the CAB-1 commands WSTL/HRN, BELL, BOOST, and BRAKE. I have tried using the AUX1, 3 start up sounds command and in fact all the AUX1 commands, but none of them will restore the commands that do not work. Is there a different reprogram code that I should be using or some other trick needed to get these trains start functioning correctly?
Our community is FREE to join. To participate you must either login or register for an account.
Get the Classic Toy Trains newsletter delivered to your inbox twice a month